Lincoln Electric AC/DC1000 - Manual
Lincoln Electric AC/DC1000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – AC/DC Submerged Arc Welding; What; The AC/DC Submerged Arc Process; How
- Page 4 – Interfacing; Hard Automation; Power Wave; Customer Supplied
- Page 5 – Productivity; Benefits; Power Electronics
For over 50 years, Lincoln
Electric has offered its
Submerged Arc Welding (SAW)
customers high deposition rates,
reliable penetration, and smooth
bead appearance.
Now, Lincoln brings you the first
advance in SAW technology that
provides the option of variable
polarity. Changes in the balance
of positive and negative polarity
of the AC waveform enable the
operator to change penetration
and deposition, without changing
the current or voltage settings.
Lincoln’s AC/DC Submerged Arc
process with the Power Wave
power source gives the operator
real-time control. Instead of
making a weld, stopping and
re-programming the new
parameters, and running a test
weld to make sure they worked,
changing the face of a weld is as
easy as turning a knob.
MODULAR
The Power Wave AC/DC1000 is designed for easy paralleling, overcoming the
problems typically associated with synchronization of AC waveforms for
increased amperage applications.
MULTI-ARC
AC/DC welding is designed for applications that require up to five
independently controlled welding arcs.
EASY INTEGRATION
Digital Communications provide a simple solution for the integration of the
welding power source to the motion controlling Programmable
Logic Controller (PLC).
INCREASED PROCESS CONTROL
Digital Communications also enable the use of software tools to record the
actual welding values for each weld as well as monitoring the status of the
welding system.
WAVEFORM CONTROL TECHNOLOGY
The Power Wave AC/DC 1000 is equipped with factory-programmed
procedures for fast setup.
AC/DC Submerged Arc Welding
P R O C E S S
W A V E F O R M C O N T R O L T E C H N O L O G Y
®
The Power Wave
®
AC/DC 1000™ takes Submerged Arc Welding to the next
level. In addition to conventional benefits of SAW, such as high deposition
rates and good penetration, heightened control and faster responses to
the arc are unique to the design of the Power Wave
®
AC/DC 1000™.
NX-2.30 3/06
T
h
e
f
u
t
u
r
e
o
f
w
e
l
d
i
n
g
i
s
h
e
r
e .
®
a d v a n t a g e s
© Copyright 2006 The Lincoln Electric Company. All rights reserved.
Patented. This product is protected by one or more of the following United States patents: 6,809,292;
6,795,778; 6,700,097; 6,697,701; 6,683,278; 6,660,966; 6,600,134; 6,683,278; 6,596,570; 6,570,130;
6,536,660; 6,489,952; 6,472,634; 6,636,776; 6,486,439; 6,441,342; 6,365,874; 6,291,798; 6,207,929;
6,111,216; 4,927,041; 4,861,965 and other pending U.S. patents. Similar patents are maintained in
other countries.
I m p r o v e s P r o d u c t i v i t y, Q u a l i t y a n d S a f e t y
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PROCESS 2 / 6 AC/DC Submerged Arc Welding A Submerged Arc Welding(SAW) option that combinedthe advantages of AC and DCSAW welding was not possibleuntil now. A Lincoln inverter powersource coupled with WaveformControl Technology providescontrol over the ratio ofpositive to negative amplitude,as well ...
4 / 6 AC/DC Submerged Arc Welding PROCESS W A V E F O R M C O N T R O L T E C H N O L O G Y ® T h e f u t u r e o f w e l d i n g i s h e r e . ® Using AC/DC Interfacing with Power Wave AC/DC 1000 Hard Automation For repeatable, high-deposition, qualitywelds, the Power Wave AC/DC 1000coupled with a ...
PROCESS 5 / 6 AC/DC Submerged Arc Welding W A V E F O R M C O N T R O L T E C H N O L O G Y ® T h e f u t u r e o f w e l d i n g i s h e r e . ® Fill Productivity Process Current (Amps) Voltage (Volts) Travel Speed (IPM) Total Kj/in. Wire Feed Speed (IPM) Electrode Diameter (in.) Deposit Rate (Lbs/...
