Lightolier C4T4GA-MHT4RS - Manual

Calculite

®

HID Adjustable Accent

C4T4GA-MHT4RS

Page 1 of 2

4 1/2" Aperture, T4.5, Ceramic Metal Halide, Glasslite, Spot

Job Information

Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

Lightolier

a Genlyte Thomas Company

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504

Features

1. Spot Upper Reflector:

Specular faceted aluminum; provides 12° beam.

Interchangeable with 25° Narrow Flood (MHT4RNF) and 40° Flood
(MHT4RF); see spec sheets C4T4GA-MHT4RNF and C4T4GA-MHT4RF.

2. Glasslite Trim Kit:

One piece borosilicate etched glass.

3. Trim Kit Adjustment Mechanism:

Provides 35° vertical tilt, 360°

horizontal rotation; lockable. Patented EZ-Aim Helical Drive System provides
fast and accurate hot aiming with Philips screwdriver.

4. Socket Housing:

Galvanized steel, pre-wired with G8.5 pulse rated socket.

Snaps onto yoke for secure attachment without tools; unitized construction
assures proper alignment of lamp to optics for consistent optical performance.

5. Frame Housing:

Steel, 0.029" (22-Ga.), matte black finish. Removable cover

for top re-lamping.

6. Frame Vertical Adjustment Mechanism:

Accommodates mounting to

virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.

7. Mounting Bars:

Galvanized steel, 0.048" (18-ga.), pre-installed telescoping

bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.

8. Retention Springs:

Rust resistant springs secure trim for quick, tool-less

installation.

9. Ballast / Cover Assembly:

Accessible from below and removable without

tools for inspection and ballast replacement .

10. Junction Box:

0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,

90° C through branch circuit conductors. Allows inspection from below.

11. Accessory Holder:

Sold separately catalog # CAH4; die-formed steel,

matte black finish, slide-in installation. Accepts up to two 3 3/4" dia. media.

12. Thermal Protector:

(Not Shown) Meets NEC and UL requirements. Do not

install insulation above nor within 3" (76mm) of any part of the luminaire.

Electrical

Electronic Ballast:

120 or 277V, 50/60 Hz., encased, high

power factor, T.H.D. <15%, thermally and transient protected, RMI/RFI complies
with FCC Part 18 non-consumer limits, shut-down circuit at end of lamp life,
sound rating “A”, -5°F minimum starting temperature, Type 1 Outdoor rating.

Ballast

ANSI Code

Voltage

Max. Amps

Input Watts

20W MH

M156

120/277

0.21/0.10

23

39W MH

M130

120/277

0.39/0.17

44

70W MH

M139

120/277

0.67/0.29 78

Options and Accessories

Chicago Plenum:

Consult Factory

Labels

UL (Suitable for Wet Locations), CSA, I.B.E.W.

Ceiling Cutout:

5 1/8” (130mm) Dia.

For Complete Fixture Order:

Glasslite Trim Kit + Spot Upper Reflector (MHT4RS) + Frame-In Kit. Each Sold Separately.

Glasslite Trim Kit + Spot Upper Reflector

Frame-In Kit

Lamp

C4T4GA + MHT4RS (Spot Upper Reflector)

Etched glass, with matching flange.

C4A20T4E1

Electronic 120V

20W T4.5

Ceramic MH

C4A20T4E2

Electronic 277V

20W T4.5

Ceramic MH

C4A39T4E1

Electronic 120V

39W T4.5

Ceramic MH

C4A39T4E2

Electronic 277V

39W T4.5

Ceramic MH

C4A70T4E1

Electronic 120V

70W T4.5

Ceramic MH

C4A70T4E2

Electronic 277V

70W T4.5

Ceramic MH

Spot
Upper Reflector