Life fitness SM80 - Manual

Life fitness SM80

Life fitness SM80 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
Page: / 23

Table of Contents:

  • Page 2 – SM80 Unpacking & Assembly Instructions; COMPONENTS OF THE SM80 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME
  • Page 3 – UNPACKING; Follow the steps below when unpacking the components of the SM80.; Cut off the shipping wrapper.; These items are shown in Figure 1.
  • Page 4 – ASSEMBLY; Figure 2 shows an assembled SM80.; Place the two weight “cubes”; in their “final resting spots.” The cubes will be
  • Page 5 – Bolt on the teardrop pulleys above the benches
  • Page 7 – Bolt on the connecting beam
  • Page 8 – Figure 8. Mount rubber bumpers and the weight stacks.
  • Page 9 – Prepare the weight stack.; W hen shipped, the weight stacks have the pull pins; Set the weight stacks onto the machine.; Using a piano dolly, lift the weight; D. Flip over the weight stack; with the top plate on the guide rods
  • Page 10 – Bolt the floating pulleys into the 190 lb weight stacks; used for the crossovers; Mount the seated row and lat benches to the frame.; Using the bolts specified in
  • Page 11 – Figure 13. Mount the benches to the frame.
  • Page 12 – INSTALLING THE CABLES; YOU MUST REMOVE ALL PULLEYS TO ROUTE THE CABLES.
  • Page 13 – CROSSOVER CABLE ROUTING; Route the low row cables as shown in Figure 17.
  • Page 15 – Figure 18. Screw the cable into the weight stack.; LAT PULLDOWN CABLE ROUTING
  • Page 16 – TRICEP PUSHDOWN CABLE ROUTING; Figure 20. Tricep pushdown cable routing.
  • Page 17 – HARDWARE
  • Page 18 – connecting beam to the tops of the cubes)
  • Page 21 – Hardware Figure 5. Weight stack rubber bumpers.; W . W eight stack rubber bumpers (inserted under weight stacks)
  • Page 22 – PARTS LIST; Description; Main components
Loading the manual

M051-K50-B116

1

8 STACK MULTI-JUNGLE (SM80)

WITH HIGH & LOW PULLEYS

UNPACKING AND ASSEMBLY INSTRUCTIONS

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - SM80 Unpacking & Assembly Instructions; COMPONENTS OF THE SM80 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME

SM80 Unpacking & Assembly Instructions 2 The SM80 comes partially assembled. Follow the steps below to complete the assembly. WARNING: COMPONENTS OF THE SM80 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE. MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY 1/2”, 3/8”, 5/8” & 9/16”Socke...

Page 3 - UNPACKING; Follow the steps below when unpacking the components of the SM80.; Cut off the shipping wrapper.; These items are shown in Figure 1.

SM80 Unpacking & Assembly Instructions 3 UNPACKING Follow the steps below when unpacking the components of the SM80. 1. Cut off the shipping wrapper. 2. Remove the parts boxes and shipping boards. 3. Remove the items in the parts boxes. These items are shown in Figure 1. A. Remove the bolts bag....

Page 4 - ASSEMBLY; Figure 2 shows an assembled SM80.; Place the two weight “cubes”; in their “final resting spots.” The cubes will be

SM80 Unpacking & Assembly Instructions 4 ASSEMBLY Figure 2 shows an assembled SM80. Figure 2. SM80 main components (seats and cables removed for clarity). 1. Cubes (2) 2. Low row bench (2)3. Lat bench (2)4. Connecting beam (1) 5. Lat tops (2)6. Tricep top (1)7. 300 lb. W eight stacks (4)8. 190 l...

Other Life fitness Models

All Life fitness Other