Life fitness SM50 - Manual
Life fitness SM50 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SM50 Unpacking & Assembly Instructions; COMPONENTS OF THE SM50 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME; Two people can accomplish this assembly in approximately 2 hours.
- Page 3 – UNPACKING; Follow the steps below when unpacking the components of the SM50.; Cut off the shipping wrapper.; These items are shown in Figure 1.
- Page 4 – ASSEMBLY; Place the two weight “cells
- Page 5 – Bolt on the teardrop pulleys; above the benches (see Figure 4) on the 4 stack cell
- Page 6 – Bolt on the connecting beam
- Page 7 – Mount the 56” lat top; HARDWARE; Mount the weight stacks to the 4-stack cell.; using a 9/16” socket and combination
- Page 8 – Unbolt the top plate and remove the guide rods; using a 9/16” socket and; D. Flip over the weight stack; Slide the guide rods (2) through the weight stacks; Flip over the weight stacks.; W hen shipped, the weight stacks have the pull pins; Set the weight stacks onto the machine.; Using a piano dolly, lift the weight
- Page 9 – Bolt on the top plate.; W ith the top plate on the guide rods, bolt on the top plate
- Page 10 – Mount the seated row and lat bench to the frame.; Using the bolts specified in; Figure 13. Mount the benches to the frame.
- Page 12 – INSTALLING THE CABLES; YOU MUST REMOVE ALL PULLEYS TO ROUTE THE CABLES.
- Page 13 – CROSSOVER CABLE ROUTING
- Page 14 – LOW ROW CABLE ROUTING; Route the low row cable as shown in Figure 17.
- Page 15 – Figure 18. Screw the cable into the weight stack.; LAT PULLDOWN CABLE ROUTING
- Page 16 – TRICEP PUSHDOWN CABLE ROUTING; Figure 20. Tricep pushdown cable routing.
- Page 18 – beam, lat top beam, and connecting beam to the tops of the cells)
- Page 21 – Hardware Figure 6. Weight stack rubber bumpers.
- Page 22 – PARTS LIST; Description; Main components
M051-K50-B115
1
5 STACK MULTI-JUNGLE
WITH HIGH & LOW PULLEYS (SM50)
UNPACKING AND ASSEMBLY INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SM50 Unpacking & Assembly Instructions 2 The SM50 comes partially assembled. Follow the steps below to complete the assembly. WARNING: COMPONENTS OF THE SM50 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE. MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY 1/2”, 3/8”, 5/8” & 9/16”Socke...
SM50 Unpacking & Assembly Instructions 3 UNPACKING Follow the steps below when unpacking the components of the SM50. 1. Cut off the shipping wrapper. 2. Remove the parts box and shipping boards. 3. Remove the items in the parts box. These items are shown in Figure 1. A. Remove the bolts bag. B. ...
SM50 Unpacking & Assembly Instructions 4 ASSEMBLY Figure 2 shows an assembled SM50. Figure 2. SM50 main components (seats and cables removed for clarity). 1. 1 stack cell2. 4 stack cell3. Lat bench 4. Connecting beam 5. Lat top 6. Tricep top 7. Low row bench8. 300 lb. W eight stacks (2)9. 190 lb...
