Life fitness SM40 - Manual

Life fitness SM40

Life fitness SM40 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
Page: / 22

Table of Contents:

  • Page 2 – SM40 Unpacking & Assembly Instructions; COMPONENTS OF THE SM40 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME; Two people can accomplish this assembly in approximately 1 hour.
  • Page 3 – UNPACKING; Follow the steps below when unpacking the components of the SM40.; Cut off the shipping wrapper.; Remove the items in the parts box. These items are shown in Figure 1.
  • Page 4 – ASSEMBLY; Figure 2 shows an assembled SM40.; Place the weight cube in its final resting spot.
  • Page 5 – Bolt on the teardrop pulleys
  • Page 6 – Mount the 56” lat top to the cell by inserting two of the large 7/16” by 6”; Figure 6. Mount rubber bumpers and the weight stacks.
  • Page 7 – Prepare the weight stack.; W hen shipped, the weight stacks have the pull pins; Set the weight stacks onto the machine.; Using a piano dolly, lift the weight; D. Flip over the weight stack
  • Page 8 – Bolt the floating pulley into the 190 lb weight stack; using a 7/8” combination wrench; Figure 9. Bolt the floating pulleys into the 190 lb weight stacks.
  • Page 9 – W hen shipped, the adjustable pulley bracket looks; Figure 10. Mount adjustable pulley bracket.; Using the bolts specified and; Figure 11. Mount the benches to the frame.
  • Page 10 – Figure 12. Bolt the benches to the frame.
  • Page 11 – INSTALLING THE CABLES; YOU MUST REMOVE ALL PULLEYS TO ROUTE THE CABLES.
  • Page 12 – ADJUSTABLE CROSSOVER CABLE ROUTING; Figure 14. Adjustable crossover cable routing.
  • Page 13 – Figure 15. Adjustable crossover cable end detail.; LOW ROW CABLE ROUTING; Route the low row cables as shown in Figure 16.
  • Page 14 – Figure 17. Screw the cable into the weight stack.; LAT PULLDOWN CABLE ROUTING
  • Page 15 – TRICEP PUSHDOWN CABLE ROUTING; Figure 19. Tricep pushdown cable routing.
  • Page 16 – HARDWARE
  • Page 17 – beam, lat top beams, and connecting beam to the tops of the cubes)
  • Page 19 – T. 56” Lat top (bolt to top of cells with pulleys above lat benches)
  • Page 20 – Hardware Figure 6. Weight stack rubber bumpers.; W . W eight stack rubber bumpers (inserted under weight stacks)
  • Page 21 – PARTS LIST; Description; Main components
Loading the manual

M051-K50-C121

1

4 STACK MULTI-JUNGLE (SM40)

UNPACKING AND ASSEMBLY INSTRUCTIONS

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - SM40 Unpacking & Assembly Instructions; COMPONENTS OF THE SM40 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME; Two people can accomplish this assembly in approximately 1 hour.

SM40 Unpacking & Assembly Instructions 2 The SM40 comes partially assembled. Follow the steps below to complete the assembly. WARNING: COMPONENTS OF THE SM40 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE. MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY 1/2”, 3/8”, 5/8” & 9/16”Socke...

Page 3 - UNPACKING; Follow the steps below when unpacking the components of the SM40.; Cut off the shipping wrapper.; Remove the items in the parts box. These items are shown in Figure 1.

SM40 Unpacking & Assembly Instructions 3 UNPACKING Follow the steps below when unpacking the components of the SM40. 1. Cut off the shipping wrapper. 2. Remove the parts box and shipping boards. 3. Remove the items in the parts box. These items are shown in Figure 1. A. Remove the bolts bag. B. ...

Page 4 - ASSEMBLY; Figure 2 shows an assembled SM40.; Place the weight cube in its final resting spot.

SM40 Unpacking & Assembly Instructions 4 ASSEMBLY Figure 2 shows an assembled SM40. Figure 2. SM40 main components (seats and cables removed for clarity). 1. Cube2. Low row bench3. Lat bench 4. Lat top 5. Tricep top 6. Adj. X-over top7. 150 lb. W eight stacks (2)8. 300 lb. W eight stacks (2) 1. ...

Other Life fitness Models

All Life fitness Other