Life fitness GS4 - Manual - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody GS4 Leg Press Adapter Kit. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * 9/16” wre...

Page 4 - PARTS LIST; FIGURE 1

PARTS LIST 4 NOTE: The LEG PRESS ATTACHMENT (LP5) must be assembled before connecting it to the PARABODY GS1/GS2 GYM SYSTEMS PART # ACU04-1525 ACU04-1526 ACU02-0055 ACU13-0149 ACU06-0024 ACUDA1E03853416NB ACUDA1E03843416NB ACUDA1E03833416NB QTY 1 1 1 1 7 2 5 2 PART # ACUDA1E03823416NB ACUDA1E0381341...

Page 5 - FIGURE 2

5 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Install PULLEY HOUSING (2) using two 3/8 X 5-3/4” BOLTS (6), four 3/8” WASHERS (11) and two 3/8” LOCK NUTS (12) as shown in FIGURE 2 FIGURE 2 STEP 2: 3/8 X 5-3/4” 12 11 6 2

Page 6 - FIGURE 3

FIGURE 3 STEP 3: • Assemble the new LEG PRESS to the CONNECTING TUBE (1) using two 3/8 X 3-3/4” BOLTS (8), four 3/8” WASHERS (11) and two 3/8” LOCK NUTS (12) as shown in FIGURE 3 6 8 11 1 12 3/8 X 3-3/4”

Page 7 - FIGURE 4

FIGURE 4 7 2 5 CABLE GUIDE 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 4: • Assemble one 3-1/2 PULLEY (5) to the PULLEY HOUSING (2) using one 3/8 X 1-3/4” BOLT (10) and one 3/8” LOCK NUT (12) as shown in FIGURE 4(b). NOTE: CABLE MUST BE PLACED IN PULLEY HOUSING BEFORE INSTALLING PULLEY • Route the LE...

Page 8 - FIGURE 5; FIGURE 6

FIGURE 5 8 3 12 11 10 3/8 X 1-3/4” • Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (10), one 3/8” WASHER (11), one “L” CABLE RETAINER (3) and one 3/8” LOCK NUT (12) ...

Page 9 - FIGURE 7; FIGURE 8

9 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 7 STEP 7: 3/8 X 4-3/4” 10 5 4 12 14 3/8 LOCK NUT SEAT FRAME • Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (7), two STEP SPACERS 1-9/16” (1...

Page 10 - FIGURE 9

10 FIGURE 9 STEP 9: 3/8 X 4-3/4” 7 5 4 12 14 3/8” LOCK NUT SEAT FRAME • Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (7), two STEP SPACERS 1-9/16” (14), and one 3/8” LOCK NUT (12) as sho...

Page 11 - CABLE ROUTING DIAGRAM

FIGURE 12 STEP 12: 3/8 X 4-3/4” 7 4 12 15 SEAT FRAME 11 • SECURELY assemble the swivel end of the LEG PRESS CABLE (4) to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (15), two STEP SPACERS 1-11/16” (15) and one 3/8” LOCK NUT (12). (NOTE: SECURELY tighten, then back nut off 1/4 turn) CABLE ROUTING DIAG...

Page 12 - THIS CONCLUDES THE ASSEMBLY OF THE GS4-LP5A LEG PRESS ADAPTER KIT

FIGURE 13 STEP 13: • Before setting the correct amount of tension in the cables, push the HEAD PLATE down, insert the WEIGHT SELECTOR PIN, and perform several repetitions at the leg press station. This will relax the cable system and prevent the HEAD PLATE from lifting up. THIS CONCLUDES THE ASSEMBL...

Life fitness GS4 - Manual

Table of Contents:

Summary

Other Life fitness Models