Page 2 - On Safety; Do not Open the Display:; On Installation; Important Precautions
1 This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules for its installation, ...
Page 3 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.
2 Important Precautions Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the releaseof heat generated during operation. If these openings a...
Page 4 - Connecting the Display; Connecting the stand base or Removing the stand base; Insert the hooks into slots.; S t a n d B a s e; H o o k; S t a n d B o d y
3 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Connecting the stand base or Removing the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. Align th...
Page 5 - I m p o r t a n t; Screw; made to the female part of the cable you're attaching.
4 Connecting the Display I m p o r t a n t This illustration depicts the general model of installation. Your monitor may differfrom the items shown in the picture.Do not carry the product upside down holding only the stand base. The productmay fall and get damaged or injure your foot. 4. Attach the ...
Page 6 - Positioning your display; Tilt Range : -5 ̊~20 ̊ Swivel Range : 350 ̊; Ergonomic
5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ Swivel Range : 350˚ Heigh...
Page 7 - Power Cord; Signal Cable; Using the Computer; NOTE
6 Connecting the Display Wall-outlet type MAC Power Cord 1 2 PC PC Varies according to model. Signal Cable A B C Connect DVI(Digital signal) CableConnect D-sub(Analog signal) Cable (PC)Connect D-sub(Analog signal) Cable (Mac)Connect HDMI Cable DVI-D(This feature is not available in all countries.) M...
Page 8 - Touch the power button on the front of panel to turn; Touch; SOURCE; button at the front side of the monitor.
Connecting the Display 7 2. Touch the power button on the front of panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.(Only to the D-sub signal cable input (RGB)) NOTE'Self Image Setting Function'? This function provides the user ...
Page 9 - Connecting the USB(Universal Serial Bus) Cable; High Speed Full Speed Low Speed
8 Connecting the Display Connecting the USB(Universal Serial Bus) Cable 1. Connect the upstream port of the display to the downstream port of the USB compliantPC or another hub using the USB cable. (Computer must have a USB port) 2. Connect the USB compliant peripherals to the downstream ports of th...
Page 10 - To arrange the cables; Please insert the; cable holder1; Please put the power cord and; Please put the power cord and the signal cable in the cable holder 2.
9 Connecting the Display To arrange the cables Connect the power cord and the signal cable as shown in the figure and then fix themto the cable holders 1 and 2. 1. Please insert the cable holder1 into the hole. 2. Please put the power cord and the signal cable in the cable holder 1. Press Pull 3. Pl...
Page 11 - Control Panel Functions; Front Panel Controls; Use this button to enter
10 Control Panel Functions Front Panel Controls Use this button to enter EZ ZOOMING , 4:3 IN WIDE , PHOTO EFFECT , SOUND items, for more information, refer to page 15 ~ 16. Button Use this button to enter On Screen Display Sub-menu toadjust BRIGHTNESS directly. MENU Button Use this button to enter o...
Page 12 - AUTO IMAGE ADJUSTMENT; button before entering the On Screen; Buttons
11 Control Panel Functions Use this button to turn the display on or off.This Indicator lights up blue when the displayoperates normally(On Mode). If the display is in SleepMode (Energy Saving), this indicator color changes to amber. Power Button(Power Indicator) Use this button to enter a selection...
Page 13 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; To make adjustments in the On Screen Display, follow these steps:
12 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The follow...
Page 14 - On Screen Display(OSD) Selection and Adjustment; Main menu Sub-menu R D H Reference
13 NOTE The order of icons may differ depending on the model (13~22). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. ● : Adjustable R : RGB Input * : only for RGB/DVI Input D : DVI Input ** : only for HD...
Page 15 - Touch the MENU Button, then the main menu of the OSD appears.; Menu Name
14 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu. Touch the MENU Button, then the main menu of the OSD appear...
Page 16 - The OSD screen will appear when you touch the; Main menu; EZ ZOOMING
15 On Screen Display(OSD) Selection and Adjustment SOUND The OSD screen will appear when you touch the button on the left bottom of the monitor. Main menu Description EZ ZOOMING To select the adjust the resolution. When you select EZ ZOOMING in OSD, display resolution goes one step down so character...
Page 17 - PHOTO EFFECT; The PhotoEffect function is disabled.; To set the buzzer sound.; MENU; To select the color of the screen.
16 On Screen Display(OSD) Selection and Adjustment PHOTO EFFECT • NORMAL : The PhotoEffect function is disabled. • GAUSSIAN BLUR : This option is to add the effect to the screen thatthe dark and sharp image becomes brighter andmore blurred. • SEPIA : This option changes the screen to be Sepia tone.T...
Page 18 - PICTURE; COLOR
17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE M E N U : Exit : Decrease : Increase AUTO/SET : Select another sub-menu BRIGHTNESS CONTRAST GAMMA BLACKLEVEL To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma valu...
Page 19 - TRACKING; To adjust the clearness of the screen.
18 On Screen Display(OSD) Selection and Adjustment TRACKING Main menu Sub menu Description M E N U : Exit : Decrease : Increase AUTO/SET : Select another sub-menu CLOCK PHASE SHARPNESS To minimize any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange...
Page 20 - SETUP
On Screen Display(OSD) Selection and Adjustment 19 Press the , buttons to reset immediately. If this does not improve the screen image, restore the factory default settings. Ifnecessary, perform the white balance function again. The white balance function isexecuted only for RGB input. SETUP M E N U...
Page 21 - PIP; PIP POSITION; To select PIP on or off.
20 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PIP Select the PIP display location. Everytime you touch the button, it will movefrom to , , . Every time youpress the button, it will move fromto , , . You can use this menu toselect the PIP display location you want....
Page 22 - Main menu Sub menu; MOVIE; Select this when you are playing a game.; NORMAL
Icons Menu Name Sub-menu Name On Screen Display(OSD) Selection and Adjustment 21 The OSD screen will appear when you touch the button on the left bottomof the monitor. These features let you easily select the best desired image conditionoptimized to the environment (ambient illumination, image types...
Page 24 - Troubleshooting; Check the following before calling for service.; No image appears
23 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator blue orgreen? ● Is ...
Page 25 - Display image is incorrect
24 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Touch the AUTO/SET button to automatically adjust your display image to...
Page 26 - Have you installed the display driver?; Have you installed the; The screen color is
25 Troubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdisplay...
Page 27 - Specifications
26 Specifications Display Sync Input Video Input Resolution Plug&Play PowerConsumption Dimensions &Weight Range Power Input Environmental Conditions 26 inches (64.868cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 64.868 cm 0.2865 mm pixel pitch Horizontal Fre...
Page 28 - Information in this document is subject to change without notice.; Data Rate; Stand Base
27 Specifications NOTE Information in this document is subject to change without notice. Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type Standard USB 2.0, Self-Power Data Rate Max 480 Mbps Power Consumption Max 2.5W x 4 Stand Base Power cord USB
Page 29 - Indicator; LED Color; VGA; HDMI Vedio INPUT
28 Specifications Preset Modes (Resolution) - D-sub(Analog) / DVI(Digital) INPUT *Recommend Mode Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 10111213141516 *17 640 x 480640 x 480720 x 480720 x 400800 x 600800 x 600 1024 x 7681024 x 7681152 x 8641280 x 7681280 x 76...
Page 30 - Installing the Wall mount plate; Kensington Security Slot; Install the Wall mount plate.
29 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate orthe interchange device. Wall mount plate(Separate purchase) This is stand-type or wall mount type andis connectable with Wall mount plate.Please refer to the installation guide formore details, whi...
Page 31 - Digitally yours
