LG T730SHMK - User Manual - manualsarea.com

Page 2 - On Safety; Do not Open the Monitor.; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential eletrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this monitor, observe the following basic rules for itsinstallation, u...

Page 3 - To Prevent Fire or Hazards:; On Installation; monitor screen because overspray may cause electrical shock.; On Repacking

A2 Important Precautions To Prevent Fire or Hazards: Always turn the monitor OFF if you leave the room for more than a short periodof time. Never leave the monitor ON when leaving the house.Keep children from dropping or pushing objects into the monitor's cabinetopenings. Some internal parts carry h...

Page 4 - Connecting the Monitor; Connecting the Tilt/Swivel stand; Insert the hooks into slots.; NOTE

A3 A3 Connecting the Monitor Latch Before setting up the monitor, ensure that the power is turned off to themonitor, computer system, and other attached devices. Carefully set the monitor face-down with the underside facing you. Connecting the Tilt/Swivel stand 1. Align the hooks on the tilt/swivel ...

Page 5 - Using the Computer; close to the monitor.; Power Cord; Signal Cable; Attached Type

A4 Connecting the Monitor Using the Computer 1. Connect the signal cable. When mated, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a properly power outlet that is easily accessible and close to the monitor. Mac adapter For Apple Macintosh use, a separate plug adap...

Page 6 - Control Panel Functions; Front Panel Controls; Buttons; Power Button; Control

A5 Control Panel Functions Front Panel Controls Buttons Use these buttons to choose or adjust items in the on screen display. MENU (or OSD) Button Use this button to enter or exit the on screen display. This Indicator lights up blue when the monitor operates normally. If the monitor is in DPM (Energ...

Page 7 - Control Direct Access Function; Button; BrightView

A6 The Contrast and Brightness functions are also available in the On Screen Display (OSD) menu. Control Direct Access Function Button Button Bring up Contrast adjustment Bring up Brightness adjustment Control Panel Functions This function optimizes the brightness, contrast orcolor value to the surr...

Page 8 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; To make adjustments in the On Screen Display, follow these steps:

A7 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe monitor is quick and easy with the On Screen Display Control system. Ashort example is quick and easy given below to familiarize you with the use ofthe contro...

Page 9 - On Screen Display(OSD) Selection and Adjustment; Adjustable

A8 Main menu Sub menu Reference On Screen Display(OSD) Selection and Adjustment To adjust the brightness andcontrast of the screen Brightness Contrast The following table indicates all the On Screen Display control, adjustment,and setting menus. BRIGHTNESS/ CONTRAST POSITION V Position H Position SI...

Page 10 - Brightness; Contrast; Vertical Position; Horizontal Position; To adjust the brightness and contrast of the screen; OSD Adjust

A9 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu. OSD Adjust Description Brightness To adjust the brightness ...

Page 11 - To adjust the size of the screen; To adjust the shape of the screen

A10 On Screen Display(OSD) Selection and Adjustment Vertical Size To adjust image height. Horizontal Size To adjust image width. To adjust the size of the screen OSD Adjust Description To adjust the shape of the screen OSD Adjust Description Tilt To correct image rotation. Side Pincushion To correct...

Page 12 - PRESET; To customize the color of the screen; To customize the screen status for a user's operating environment

A11 This item is used to select the monitor'sinput signal level. The normal level used formost PCs is 0.7V.If the screen becomes suddenly washed-out or blurred, please select 1.0V and tryagain. To choose the language in which thecontrol names are displayed.OSD Menus are available in 12 languages:Eng...

Page 13 - To improve the clarity and stability of the screen

A12 DEGAUSS RECALL RESET MOIRE CONVER-GENCE * PURITY * On Screen Display(OSD) Selection and Adjustment To manually demagnetize the screen toavoid showing incorrect images or colors. You can use this function to reload themodified parameters for screen displayoperation, as specified by the user after...

Page 14 - Troubleshooting; Check the following before calling for service.; No image appears; blue; Press the Power button.; The screen is flickering.

A13 Troubleshooting Check the following before calling for service. No image appears ❐ Is the power cord of themonitor connected? ❐ Is the power indicator lighton? ❐ Is the power on and thepower indicator blue ? ❐ Is the power indicatorflickering? ❐ Do you see an "OUT OFFREQUENCY" messageon ...

Page 15 - The screen color is not normal.

A14 Troubleshooting ❐ Do you see basicdiscoloration (16 colors)? ❐ Is the screen colorunstable or monochrome? ❐ Do you see black dots onthe screen? ❐ Do you see a partialblurring on the screen? • Set the color depth to 256 colors or higher: use ' ControlPanel '->' Display '->' Settings '->'...

Page 16 - Specifications; Separate TTL, Positive/Negative

A15 Specifications NOTE Information in this document is subject to change without notice. 17 inches (16.0 inches viewable)90 degree deflection0.25mm dot pitchAGARAS(Anti-Glare Anti-Reflective Anti-Static) coating Horizontal Freq. 30 - 71kHz (Automatic) Vertical Freq. 50 - 160Hz (Automatic) Input For...

Page 18 - Digitally yours