LG T70B-BN - User Manual - manualsarea.com

Page 2 - On Safety; Do not Open the Monitor.; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential eletrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this monitor, observe the following basic rules for itsinstallation, u...

Page 3 - To Prevent Fire or Hazards:; On Installation; monitor screen because overspray may cause electrical shock.; On Repacking

A2 Important Precautions To Prevent Fire or Hazards: Always turn the monitor OFF if you leave the room for more than a short periodof time. Never leave the monitor ON when leaving the house.Keep children from dropping or pushing objects into the monitor's cabinetopenings. Some internal parts carry h...

Page 4 - NOTE; the receiver is connected.

A3 Important Precautions NOTE THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TVINTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THISEQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'SAUTHORITY TO OPERATE THE EQUIPMENT. NOTE This equipment has been tested and found to comply with the limits...

Page 5 - Connecting the Monitor; Connecting the Tilt/Swivel stand; Insert the hooks into slots.

A4 Connecting the Monitor Latch Before setting up the monitor, ensure that the power is turned off to themonitor, computer system, and other attached devices. Carefully set the monitor face-down with the underside facing you. Connecting the Tilt/Swivel stand 1. Align the hooks on the tilt/swivel sta...

Page 6 - Using the Computer; close to the monitor.; Power Cord; Signal Cable; Attached Type

A5 Connecting the Monitor Using the Computer 1. Connect the signal cable. When mated, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a properly power outlet that is easily accessible and close to the monitor. Mac adapter For Apple Macintosh use, a separate plug adap...

Page 7 - Control Panel Functions; Front Panel Controls; Buttons; Power Button; Control

A6 Control Panel Functions MENU SELECT Brightview Front Panel Controls Buttons Use these buttons to choose or adjust items in the on screen display. MENU Button Use this button to enter or exit the on screen display. This Indicator lights up blue when the monitoroperates normally. If the monitor is ...

Page 8 - Control Direct Access Function; BrightView

A7 Control Direct Access Function Control Panel Functions This function optimizes the brightness, contrast orcolor value to the surrounding conditions and settings. BrightView MODE DESCRIPTION TEXT PHOTO MOVIE NORMAL This is convenient for using documents such asWord Processor or spreadsheet. This i...

Page 9 - On Screen Display (OSD) Control Adjustment; Screen Adjustment

A8 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe monitor is quick and easy with the On Screen Display Control system. Ashort example is quick and easy given below to familiarize you with the use ofthe contro...

Page 10 - On Screen Display(OSD) Selection and Adjustment; Icon Main menu

A9 On Screen Display(OSD) Selection and Adjustment Contrast Brightness H Position H Size V Position V Size Tilt * Pincushion Pin Balance Parallelogram Trapezoid Top Corner * Icon Main menu Icon Main menu The following table indicates all the On Screen Display control, adjustment,and setting menus. :...

Page 11 - Icon Sub menu

A10 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu. Icon Sub menu Description CONTRAST To adjust the contrast ...

Page 12 - OK

A11 On Screen Display(OSD) Selection and Adjustment Icon Sub menu Description H MOIRE V MOIRE This item allows you to reduce the degree of moire.(Moire is caused by interference Horizontal ScanLine with the periodical dot screen). It is normallyOFF(H:0/V:0).The moire adjustments may affect the focus...

Page 14 - Troubleshooting; Check the following before calling for service.; No image appears; Press the Power button.; The screen is flickering.

A13 Troubleshooting Check the following before calling for service. No image appears ❐ Is the power cord of themonitor connected? ❐ Is the power indicator lighton? ❐ Is the power on and thepower indicator blue? ❐ Is the power indicatorflickering? ❐ Do you see an "OUT OFFREQUENCY" messageon t...

Page 15 - The screen color is not normal.

A14 Troubleshooting ❐ Do you see basicdiscoloration (16 colors)? ❐ Is the screen colorunstable or monochrome? ❐ Do you see black dots onthe screen? ❐ Do you see a partialblurring on the screen? • Set the color depth to 256 colors or higher: use 'ControlPanel' -> 'Display' -> 'Settings' -> '...

Page 16 - Specifications; Separate TTL, Positive/Negative

A15 A15 Specifications NOTE Information in this document is subject to change without notice. 17 inches (16.0 inches viewable)106 degree deflection0.25mm dot pitchAGARAS(Anti-Glare Anti-Reflective Anti-Static) coating Horizontal Freq. 30 - 71kHz (Automatic) Vertical Freq. 50 - 160Hz (Automatic) Inpu...

Page 18 - Digitally yours