LG PQRCHCSA - User Manual

Owner’s & Installation Manual 5 ENGLISH Installation instruction Type A screws 1. Please fix tightly using provided screws(Type A) after placing remote controller setup board on the place where you like to setup. - Please set it up not to bend because poor setup could take place if setup board b...

Installation instruction 6 Wired Remote Controller Wall Side Wall Side Wall Side Wall Side <Connecting order> <Separating order> 3. Please fix remote controller upper part into the back plate attached to the surface of the wall, asthe Fig. 1, and then, connect with back plate bypressing ...

Installation instruction 8 Wired Remote Controller ⑤ Please connect the Terminal blocks of indoor unit’s C/BOX and wired remote controller by referring to theimages and contents shown below.Connect the yellow(signal) part of the wired remote controller’s terminal block and the ‘YL’ part of the indoo...

Owner’s & Installation Manual 9 ENGLISH Installation instruction Remote controller installation Since the room temperature sensor is in the remote controller, the remote controller boxshould be installed in a place away from direct sunlight, high humidity and direct supply ofcold air to maintain...

10 Wired Remote Controller Owner's instruction Standard Operation - Cooling Mode TEMP FAN SPEED OPER MODE Cooling operation will begin if you press the button. - is displayed on the display screen. 1 If you press the button, the cooling operation will stop. 4 If you press the OPER MODE button during...

Owner’s & Installation Manual 11 ENGLISH Owner's instruction It supplies warm wind to the indoor Standard Operation - Heating Mode TEMP FAN SPEED OPER MODE If you want to set the heating operation, press the button. And press the button.- is displayed on the display screen. 1 If you press the bu...

12 Wired Remote Controller Owner's instruction Standard Operation - Dry Mode TEMP FAN SPEED OPER MODE After operating the product by pressing the button, set up the dry(Dehumidification) by pressing the button.- is displayed on the display screen. 1 When the dry operation is selected, the pre-set te...

Owner’s & Installation Manual 13 ENGLISH Owner's instruction TEMP FAN SPEED OPER MODE After operating the product by pressing the button, set up the fan operation by pressing the button. 1 - When the fan operation is selected, will be shown on the display window as shown on the left side. - is d...

14 Wired Remote Controller Owner's instruction TEMP FAN SPEED OPER MODE Select the proper fan speed which you want by pressing the button on the remote controller. - If you press the button, the fan speed will change in the order of [SLO → LO → MED → HI]. - The initial fan speed is “Lo”.- If the pro...

Owner’s & Installation Manual 15 ENGLISH Owner's instruction It is the function to use preventing children or others from careless using. Function Setting - Child Lock TEMP FAN SPEED OPER MODE During the operation, when pressing the button and button for approx. 3 seconds, the ‘Child Lock’ funct...

16 Wired Remote Controller Owner's instruction TEMP FAN SPEED OPER MODE When pressing the button of the remote controller adjustment section for approx. 3 seconds, the room temperature will be indicated for about 5 seconds before resuming to the previous display panel. In the case of the room temper...

Owner’s & Installation Manual 17 ENGLISH Owner's instruction Outage Compensation Function If power supply fails due to outage or other reasons, the outage compensation function automaticallyretrieves the operating conditions previously programmed before the power failure. Thus, you don’tneed to ...

18 Wired Remote Controller Owner's instruction Checkups before reporting breakdown Please first check the items below for product's defects before consulting to service center. Symptoms • Is air-conditioner's power on? • Are air-conditioner and remote controller properly connectedwith cable? • Is ca...