Page 2 - ENG; ENGLISH; TABLE OF CONTENTS
2 ENG ENGLISH Table of Contents TABLE OF CONTENTS 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 7 Lifting and moving the Monitor set 7 Setting Up the Monitor set 7 - Attaching the Stand Base 8 - Detaching the stand base 8 - Adjusting the stand body 9 - Adjusting the angle 9 - Mounting o...
Page 3 - ASSEMBLING AND PREPARING; Unpacking; Power Cord; CAUTION
3 ENG ENGLISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look...
Page 4 - Parts and buttons; Power Indicator; NOTE
4 ENG ENGLISH ASSEMBLING AND PREPARING Parts and buttons Power Indicator y LED On : Power is on y LED Off: Power is off Front Buttons Input Connectors (See p.13 to 14) (Power Button) Input Connectors (See p.15) y Keep radio away 10 cm from the front side buttons and power button. NOTE N195WU
Page 7 - Setting Up the Monitor set; Attaching the Stand Base; Lifting and moving the
7 ENG ENGLISH ASSEMBLING AND PREPARING Setting Up the Monitor set Attaching the Stand Base 1 Place the monitor's screen face down. y To protect the screen from scratches, cover the surface with a soft cloth. 3 Using a coin, turn the screw clockwise to se- cure the stand base. 2 Check the position (a...
Page 8 - Detaching the stand base; stand base; Stand Body
8 ENG ENGLISH ASSEMBLING AND PREPARING y The components appearing in the illustra- tions may look different from the actual prod- uct. y Do not carry the monitor upside-down as this may cause it to fall off its stand, resulting in damage or injury. y To avoid damaging the screen when lifting or movi...
Page 9 - Mounting on a table; Adjusting the angle; Front Side; WARNING
9 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift the monitor and place it on the table in an upright position.Install at least 10 cm away from the wall to ensure sufficient ventilation. 2 Connect the adaptor to the monitor, then plug the power cord into the wall outlet. 3 Press the ...
Page 10 - Using the Kensington locking
10 ENG ENGLISH ASSEMBLING AND PREPARING Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor.For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect ...
Page 11 - Installing the wall mount plate; Wall Mount Plate
11 ENG ENGLISH ASSEMBLING AND PREPARING Installing the wall mount plate This monitor has a VESA compatible mount on the back. Most mounts will require an LG mounting plate. Detaching the stand body 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a...
Page 12 - Model; Mounting on a wall
12 ENG ENGLISH ASSEMBLING AND PREPARING 10 cm 10 cm 10 cm 10 cm y Unplug the power cord before moving or in-stalling the monitor to avoid electric shocks. y The wall mount kit includes the installation guide and necessary parts. y The wall mounting bracket is optional. The accessories can be purchas...
Page 13 - USING THE MONITOR SET; Using Primary Station
13 ENG ENGLISH USING THE MONITOR SET USING THE MONITOR SET Using Primary Station y This monitor supports the *Plug and Play feature.*Plug and Play: A feature that allows you to add a device to your computer, without having to reconfigure anything or install any manual drivers. D-SUB IN connection - ...
Page 14 - Using Standard Stations; USB cable connection - PC
14 ENG ENGLISH USING THE MONITOR SET NOTE NOTE Using Standard Stations USB cable connection - PC D-SUB IN transfers analog video signals from the PC to the monitor. Connect the monitor to the PC using the provided 15-pin D-SUB signal cable as illustrated below. Back of the product. USB cable connect...
Page 15 - Peripheral device connection; Right; Self Image Adjustment
15 ENG ENGLISH USING THE MONITOR SET Peripheral device connection Connect peripheral devices to the monitor using USB, headphone, speaker, and microphone ports. Right Bottom y If a PS2 keyboard and mouse are connected to the PC audio device in a multi-computing environment (normal mode), the sound o...
Page 16 - Front Side Buttons; CUSTOMIZING SETTINGS; Accessing The Main Menus; EXIT
16 ENG ENGLISH CUSTOMIZING SETTINGS MENU SMART+ VOLUME INPUT EXIT MONITOR SETUP AUTO Front Side Buttons CUSTOMIZING SETTINGS Accessing The Main Menus 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press to select the desired menu item. 3 To change the setting...
Page 17 - MENU Settings; Picture
17 ENG ENGLISH CUSTOMIZING SETTINGS MENU Settings Picture 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the monitor. 4 Select EXIT to leav...
Page 18 - Color
18 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description COLOR TEMP o o Allows PRESET or USER to be selected. PRESET o o WARM Sets the screen color to a reddish tone. MEDIUM Sets the screen color between the reddish and bluish tone. COOL Sets the screen color to a bluish tone. USER o ...
Page 19 - Display
19 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description HORIZONTAL o x Moves the display area left or right. VERTICAL o x Moves the display area up or down. CLOCK o x If vertical lines are shown on the screen, adjust the frequency to mini- mize the lines and adjust the screen's horiz...
Page 20 - Volume
20 ENG ENGLISH CUSTOMIZING SETTINGS EXIT MENU VOLUME Menu Analog (D-SUB) USB Description VOLUME x o To adjust the volume of headphone/Speaker. (Only for USB input) Volume 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the opti...
Page 21 - Others
21 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description LANGUAGE o o Sets the menu screen to the desired language. POWER OFF OSD x o Enables or disables the power off message when turning power off. If it is set to "Off", the power off message is not displayed while maintaini...
Page 22 - Auto Bright
22 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description ON o o If select on,it automatically controls the brightness of display to best suit the surrounding working environment,providing the optimal viewing condition and maximized user convenience. OFF o o If select off,auto brightne...
Page 23 - Original Ratio
23 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description WIDE o o Switch to full screen mode according to input image signal. ORIGINAL o o Change the input image signal ratio to original. This function works only if input resolution is lower than Monitor set ratio (16:9). Original Rat...
Page 25 - TROUBLESHOOTING; Nothing is displayed on the screen
25 ENG ENGLISH Troubleshooting TROUBLESHOOTING Nothing is displayed on the screen Is the monitor's power cord plugged in? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator. Is the power indicator displaying as purple? y Adjust the...
Page 26 - The image is displayed abnormally.
26 ENG ENGLISH Troubleshooting The image is displayed abnormally. Does the display area appear uncentered? Pressing the AUTO button will automatically optimize the screen to the current display mode.If you are not satisfied with the optimized screen, you can manually adjust the POSITION option in th...
Page 27 - PRODUCT SPECIFICATION
27 ENG ENGLISH Product Specification PRODUCT SPECIFICATION LCD Screen Type 470.1 mm (18.51 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) ScreenDiagonal length of the screen: 470.1 mm Pixel Pitch 0.30 mm x 0.30 mm Resolution Maximum Resolution 1366 x 768 @ 60 Hz Recommended Resolution...
Page 29 - Preset Mode
29 ENG ENGLISH Product Specification Preset Mode Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remark 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 800 x 600 37.879 60 +/+ 1024 x 768 48.363 60 -/- 1360 x 768 47.712 60 +/+ 1366 x 768 47.712 60 +/+ Preset Mode Horizon...
Page 30 - PROPER POSTURE; Proper posture for using the monitor
30 ENG ENGLISH Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. y Using the monitor for a prolonged period of time can cause eye fatigue. Take a 10-minute break every hour. y The stand is designed to best support...
Page 31 - ENERGY STAR is a set of power-saving
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL As an ENERGY S...
