Page 2 - ENG; English; TABLE OF CONTENTS
2 ENG English Table of Contents TABLE OF CONTENTS 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 6 Setting Up the Monitor set 6 - Attaching the Stand Base 6 - Detaching the stand base 7 - Adjusting the stand height 7 - Adjusting the angle 8 - Mounting on a table 8 - Using the Kensington ...
Page 3 - ASSEMBLING AND PREPARING; Unpacking; CAUTION
3 ENG English ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look...
Page 4 - Parts and buttons
4 ENG English ASSEMBLING AND PREPARING Parts and buttons Power Indicator y y LED On : Power is on y y LED Off: Power is off Front Side Buttons Input Connectors (See p.11 to 14) (Power Button) Input Connectors (See p.14 )
Page 6 - Detaching the stand base; Setting Up the Monitor set; Attaching the Stand Base
6 ENG English ASSEMBLING AND PREPARING y y The components appearing in the illustra- tions may look different from the actual prod- uct. y y Do not carry the monitor upside-down as this may cause it to fall off its stand, resulting in damage or injury. y y To avoid damaging the screen when lifting o...
Page 7 - Adjusting the stand height
7 ENG English ASSEMBLING AND PREPARING y y Once the pin is removed, it is not necessary to re-insert it to adjust the height. Adjusting the stand height 1 Place the monitor mounted on the stand base in an upright position. Adjusting the angle 1 Place the monitor mounted on the stand base in an uprig...
Page 8 - Mounting on a table
8 ENG English ASSEMBLING AND PREPARING Mounting on a table 1 Lift the monitor and place it on the table in an upright position.Install at least 10 cm away from the wall to ensure sufficient ventilation. 2 Connect the adaptor to the monitor, then plug the power cord into the wall outlet. 3 Press the ...
Page 9 - Installing the wall mount plate; NOTE
9 ENG English ASSEMBLING AND PREPARING Installing the wall mount plate This monitor has a VESA compatible mount on the back. Most mounts will require an LG mounting plate. Detaching the stand body 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a ...
Page 10 - Mounting on a wall
10 ENG English ASSEMBLING AND PREPARING 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will n...
Page 11 - USING THE MONITOR SET; Connecting Input Signal Cable
11 ENG English USING THE MONITOR SET USING THE MONITOR SET Connecting Input Signal Cable y y This monitor supports the *Plug and Play feature.*Plug and Play: A feature that allows you to add a device to your computer, without having to reconfigure anything or install any manual drivers. D-SUB IN con...
Page 12 - DVI connection - PCoIP
12 ENG English USING THE MONITOR SET DVI connection - PCoIP Transfers digital video signals to another monitor. Connect the monitor using the DVI cable as illus-trated below.This connection is used to support an extended monitor or replicate the image displayed on the monitor. y y To connect the mon...
Page 13 - Connecting LAN/Peripherals; LAN connection - PCoIP
13 ENG English USING THE MONITOR SET Connecting LAN/Peripherals LAN connection - PCoIP The LAN connection transmits PCoIP signals to the monitor. Connect the router or switch to the monitor using a LAN cable as illustrated below. y y The LAN cable is sold separately. y y The following LAN cable type...
Page 14 - Peripheral device connection
14 ENG English USING THE MONITOR SET y y Peripheral devices are sold separately. y y The USB ports on the left and bottom of the monitor can be used to connect the key-board, mouse, and other USB devices. y y Cables with angled plugs may have clear-ance issues, use straight plugs when pos-sible. Ang...
Page 15 - Self Image Adjustment
15 ENG English USING THE MONITOR SET y y What is "Self Image Adjustment"? This func-tion runs when the monitor is connected for the first time and performs automatic image adjustment for each signal (only available for analog [D-SUB input] signals) to provide an optimal screen display. Self ...
Page 16 - CUSTOMIZING SETTINGS; Accessing The Main Menus
16 ENG English CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing The Main Menus 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press to select the desired menu item. 3 To change the settings of the selected item press the buttons on the front of the monitor...
Page 17 - MENU Settings; Picture
17 ENG English CUSTOMIZING SETTINGS MENU Settings Picture 1 Press any button on the front of the monitor to dis- play the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the monitor. 4 Select EXIT to le...
Page 18 - Color
18 ENG English CUSTOMIZING SETTINGS Menu Analog (D-SUB) PCoIP Description COLOR TEMP ● ● Allows PRESET or USER to be selected. PRESET ● ● sRGB Sets the screen color according to the sRGB color standard. WARM Sets the screen color to a reddish tone. MEDIUM Sets the screen color between the reddish an...
Page 19 - Display
19 ENG English CUSTOMIZING SETTINGS Menu Analog (D-SUB) PCoIP Description HORIZONTAL ● x Moves the display area left or right. VERTICAL ● x Moves the display area up or down. CLOCK ● x If vertical lines are shown on the screen, adjust the frequency to mini- mize the lines and adjust the screen's hor...
Page 20 - Others
20 ENG English CUSTOMIZING SETTINGS Menu Analog (D-SUB) PCoIP Description LANGUAGE ● ● Sets the menu screen to the desired language. PCoIP ● x Allows the PCoIP to be turned ON or OFF. If the input is PCoIP, the "PCoIP" option is disabled. This option is enabled when analog signals are input ...
Page 21 - Settings : PCoIP Input
21 ENG English CUSTOMIZING SETTINGS 1 Press any button on the front of the monitor to dis- play the MONITOR SETUP OSD menu. 2 Press the AUTO button to automatically adjust the screen. 3 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) butto...
Page 22 - TROUBLESHOOTING
22 ENG English Troubleshooting TROUBLESHOOTING Nothing is displayed on the screen Is the monitor's power cord plugged in? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator. Is the power indicator displaying as white? y Adjust the ...
Page 24 - PRODUCT SPECIFICATION
24 ENG English Specifications PRODUCT SPECIFICATION LCD Screen Type 558 mm (22 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) ScreenDiagonal length of the screen: 558 mm Pixel Pitch 0.282 mm x 0.282 mm Resolution Maximum Resolution 1680 x 1050 @ 60 Hz Recommended Resolution 1680 x 105...
Page 25 - Preset Mode
25 ENG English Product Specification Preset Mode Display Modes (Resolution) Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remark 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 800 x 600 37.879 60 +/+ 1024 x 768 48.363 60 -/- 1280 x 1024 63.981 60 +/+ 1680 x 1050 65.290 60 -/+ Re...
Page 26 - PROPER POSTURE; Proper posture for using the monitor
26 ENG English Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. y y Using the monitor for a prolonged period of time can cause eye fatigue. Take a 10-minute break every hour. y y The stand is designed to best sup...
Page 27 - USING PCOIP SOLUTION
27 ENG English Using PCoIP Solution USING PCOIP SOLUTION Selecting the Connect button initiates a PCoIP or RDP session depending on the session settings. While the PCoIP connection is pending, the OSD local GUI will display a "Connection Pending" message. When the connection is established, ...
