Page 2 - Safety Precautions; Precautions in installing the Product; Warning; Caution
A1 Safety Precautions Please read these safety precautions carefully before using the product. Precautions in installing the Product If you ignore the caution message, you may be slightly injured or the product may be damaged If you ignore the warning message, you may be seriously injured or there i...
Page 3 - ENGLISH; Electrical Power Related Precautions; Precautions in Moving the Product
A2 ENGLISH A2 Electrical Power Related Precautions Make sure to connect the power cable to the grounded current. - You may be electrocuted or injured. Use the rated voltage only. - The product can be damaged, or you may be electrocuted. During a thunder or lightning storm, unplug the power cable or ...
Page 4 - Precautions in Using the Product; On Disposal
A3 Safety Precautions Caution Precautions in Using the Product Warning Do not put or store inflammable substances near the product. - There is a danger of explosion or fire due to careless handling of the inflammable substances. When cleaning the brown tube surface, unplug the power cord and scrub w...
Page 5 - Accessories; Optional; Inserting batteries into remote Control.
A4 ENGLISH Accessories Speaker kit / Screws (Applicable only for models that support the speakers) Remote Control/Batteries Power Cord Audio Cable (PC) Product OR Desktop Stand Type Free Mount Type Please check the accessories in the product package.* The product and the accessories can be different...
Page 6 - Using the Remote Control; Name of the Remote Control Buttons
A5 Using the Remote Control Power On/Off Button • Input Select Button • AV Button (See next page) Sleep ButtonWhen watching AV/S-Video/Component1/ Component2- The product will be automatically turned off after a certain period of time. Press this button repetitively to select anappropriate time dura...
Page 8 - PIP
A7 Using the Remote Control <Table of PIP/POP/PBP Function Support> SWAP SWAP When 'Input Signal 1' comes on in the main screen, only 'Input Signal 2' can be displayed on the sub-screen. On the contrary, if the main screen displays 'Input Signal 2', the sub-screen can display 'InputSignal 1' o...
Page 9 - To arrange cables in order - Optional; down on the base as shown in the figure.; * Applicable only for models that support the stand
A8 ENGLISH To arrange cables in order - Optional 1. Disassemble the stand cover. The cover may be easily disassembled by pressing down on the base as shown in the figure. 2. After connecting the cables, correctly position the stand cover into the holes on the stand. If securely connected, you will h...
Page 10 - Connecting the Speakers - Optional; * Applicable only for models that support the speakers
A9 Connecting the Speakers - Optional Use the screws to secure the speakers on the rear side of the product as shownin the below figure. * Applicable only for models that support the speakers When the speaker is installed.
Page 11 - Name and Function of the Parts; Rear View; Power Connector : Connect the power cord
A10 ENGLISH Name and Function of the Parts Rear View Power Connector : Connect the power cord Wired Remote Control Port RS-232C Serial Ports PC Signal Inputs PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card. AV Ports Back Cap- Open the back cap before you install th...
Page 12 - Connecting to External Devices; Connect the power cord.; When Connecting to your PC
A11 First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. When connecting with the DVI signal input cable. When connecting with the D-Sub signal input cable. (IBM compatible PC1) When connecting with the D-Sub signal input cable. (IBM co...
Page 13 - Or, press the SOURCE button at the front side of the product.; Turn on power by pressing the power button on the product.; SOURCE
A12 ENGLISH Select an input signal.Press the SOURCE button on the remote control to select the input signal. Or, press the SOURCE button at the front side of the product. SOURCE SET • How to connect to two computers.Connect the signal cables (DVI and D-Sub) to each computer.Press the SOURCE button i...
Page 14 - Product 1; To use different products connected to each other; Watching RGB Outputs; Product 2
A13 Connecting to External Devices Use this function when displaying ANALOG RGB inputs of a PC to the other product. Product 1 PC • To use different products connected to each other Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect...
Page 15 - When connecting with a RCA cable.; Product; When watching VCR / DVD
A14 ENGLISH Select an input signal.Press the SOURCE button on the remote control to select the input signal. Or, press the SOURCE button at the front side of the product. SOURCE SET SOURCE SELECT When connecting with an RCA cable. • Select AV. When connecting with an S-Video cable. • Select S-Video....
Page 19 - Connect to the external device if you record the broadcasting.; Watching AV Outputs
A18 ENGLISH Connect to the external device if you record the broadcasting. • When you set the input signal of the main screen as 'AV (CVBS)', you can transmit the signal that you're watching to the AV output terminal. RCA Cable (not included) Red White Yellow R W Product Video/TV/Product Y Watching ...
Page 20 - Selecting and Adjusting the Screen; Power Button; MENU Button
A19 Selecting and Adjusting the Screen Name of the Buttons in the ScreenAdjustment Unit • Press this button to turn on the power. Press this button again to turn it off. • This Indicator lights up green when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, thi...
Page 21 - Name of the Buttons in the Screen Adjustment Unit; SOURCE Button
A20 ENGLISH • The unit that receives the signal from the remote control. Name of the Buttons in the Screen Adjustment Unit [For PC Analog signal] [Other signals] • The current signal and mode information will be displayed. AUTO/SELECT Button AV Composite Video S-Video Separate Video Component 1 HDTV...
Page 22 - OSD Menu
A21 Selecting and Adjusting the Screen OSD Menu Icon Function Description PICTURE SOUND Adjusts the screen video. Adjusts the audio function. Adjusts screen brightness, contrast and color that you prefer. Note OSD(On Screen Display)The OSD function enables you to adjust the screen status convenientl...
Page 23 - How to adjust the OSD (On Screen Display) screen
A22 ENGLISH How to adjust the OSD (On Screen Display) screen • Use the remote control to adjust the OSD screen. How to adjust the screen automatically You need to adjust the screen display when connecting the product toa new computer or changing the mode. Refer to the following section toset an opti...
Page 24 - Adjusting Screen Color
A23 Selecting and Adjusting the Screen Adjusting Screen Color Contrast To adjust the contrast of the screen.Brightness To adjust the brightness of the screen.Color To adjust the color to desired level.Sharpness To adjust the cleaness of the screen.Tint To adjust the tint to desired level. AV/S-Video...
Page 26 - Selecting the options
A25 Selecting and Adjusting the Screen Selecting the options Language PowerIndicator To choose the language in which the control names are displayed. Use this function to set the power indicator on the front side of the product to On or Off.If you set Off, it will go off. If you set On at any time, ...
Page 27 - To use this function
A26 ENGLISH Selecting the options Tile mode Tile mode and choose Tile alignment and set the IDof the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved. It is used to enlarge the screen and also used with severalproducts to view s...
Page 30 - Adjusting Screen CLOCK/PHASE and Position; ARC; Position
A29 Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position This button is for the automatic adjustment of the screen position, clock and phase.This function is suitable for analoge singnal input only(RGB1/RGB2 input only). ARC Auto-configure To minimize any vertical bars or str...
Page 33 - Troubleshooting; Did you install the driver?; 'Unknown Product' message appears when the product is connected.; Is the product power cord connected?
A32 ENGLISH • See if the power cord is properly connected to the outlet. • See if the power switch is turned on. • Adjust brightness and contrast again. • If the product is in power saving mode, move the mouse or press any key. • The signal from the PC (video card) is out of the vertical or horizont...
Page 34 - Is the screen position wrong?; The screen image looks abnormal.
A33 Troubleshooting ● Is the screen position wrong? ● Do thin lines appear on the background screen? ● Horizontal noise appears or the characters look blurred. ● Unable to adjust the horizontal/verticalposition in the Zoom menu. ● Screen size is automatically adjustedwhen connected to the PC. ● Brig...
Page 35 - Screen has poor color resolution; Screen color is abnormal.; The audio function does not work.
A34 ENGLISH • Set the number of colors to more than 24 bits (true color) Select Control Panel – Display – Settings – Color Table menu in Windows. • Check the connection status of the signal cable. Or, re-insert the PC video card. • Several pixels (red, green, white or black color) may appear on the ...
Page 36 - NOTE; LCD Panel; Specifications
A35 NOTE Information in this document is subject to change without notice. [32 inch] 32 inches (80.04 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) PanelVisible diagonal size: 80.04 cm0.5025 mm (Pixel Pitch) [37 inch] 37 inches (94.03 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal ...
Page 37 - Dimensions
A36 ENGLISH Width x Height x Depth [32 inch] [1] 80.30 cm (31.61 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)[2] 80.30 cm (31.61 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches)[3] 96.40 cm (37.95 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)[4] 96.40 cm (37.95 inche...
Page 38 - Net
A37 Specifications Dimensions &Weight Net [32 inch] [1] 19.4 kg (42.77 lbs) [2] 16.0 kg (35.27 lbs) [3] 21.1 kg (46.52 lbs) [4] 17.7 kg (39.02 lbs) [37 inch] [1] 26.7 kg (58.86 lbs) [2] 23.5kg (51.81 lbs) [3] 30.5 kg (67.24 lbs) [4] 25.7 kg (56.66 lbs) [42 inch] [1] 35.2 kg (77.60 lbs) [2] 30.8 ...
Page 39 - Audio; Video Signal
A38 ENGLISH RMS Audio Output 10W+10W(R+L) Input Sensitivity 0.7Vrms Speaker Impedance 8 Ω Audio * Applicable only for models that support the speakers NOTE Information in this document is subject to change without notice. Max. Resolution RGB1 / RGB2 : 1600 X 1200 @60Hz DVI : 1280 X 1024 @60Hz – It m...
Page 40 - * Applicable only for models that support the speakers.
A39 RMS Audio Output 10W+10W(R+L) Input Sensitivity 0.7Vrms Speaker Impedance 8 Ω Audio * Applicable only for models that support the speakers. NOTE Information in this document is subject to change without notice. Max. Resolution RGB1 / RGB2 : 1920 X 1080 @60Hz DVI : 1920 X 1080 @60Hz Recommended R...
Page 41 - PC Mode – Preset Mode; Preset mode; Power Indicator
A40 ENGLISH Preset mode Horizontal Frequency (kHz) Vertical Frequency (Hz) PC Mode – Preset Mode Preset mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 123456789 10 640 x 350720 x 400640 x 480640 x 480640 x 480800 x 600800 x 600800 x 600832 x 624 1024 x 768 31.46931.46831.46937.50043.26937.8...
Page 43 - Controlling the Multiple Product; Connecting the cable; Communication Parameter
A1 Controlling the Multiple Product RS-232C Connecting the cable Connect the RS-232C cable as shown in the picture. * The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC. Baud Rate : 96...
Page 44 - Command Reference List
A2 ENGLISH COMMAND1 COMMAND2 DATA(Hexa) 01. Power k a 00H - 01H 02. Input Select k b 02H - 08H 03. Aspect Ratio k c 01H - 06H 04. Screen Mute k d 00H - 01H 05. Volume Mute k e 00H - 01H 06. Volume Control k f 00H - 64H 07. Contrast k g 00H - 64H 08. Brightness k h 00H - 64H 09. Color k i 00H - 64H 1...
Page 45 - Transmission / Receiving Protocol
OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] * The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC compute...
Page 55 - Data
A13 Controlling the Multiple Product RS-232C 21. Tiling Mode(Command : d d) Change a Tiling Mode. Transmission [d][d][][Set ID][][Data][x] * The data can not be set to 0X or X0 except 00. Acknowledgement [d][][00][][OK/NG][Data][x] 22. Tile H Position(Command : d e) To set the horizontal position . ...
Page 59 - IR Codes; How to connect
A17 IR Codes RS-232C How to connect Remote Control IR Code Connect your wired remote control to Remote Control port on the Product. Output waveform single pulse, modulated with 37.917KHz signal at 455KHz Carrier frequency FCAR = 1/Tc = fosc/12Duty ratio = T1/Tc = 1/3 Configuration of frame • 1st fra...
