LG LVC-C311HM - Manual - manualsarea.com

Page 2 - Warning

2 CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK) NO USER SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER- VICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION This symbol is intended to alert theuser to the presence of uninsulated“dangerous voltage” wit...

Page 4 - Cautions for Safe Operation

Cautions for Safe Operation 4 Power Supply This camera must always be operated a 12V DCUL Listed, Class 2 Power Supply only. Handling of the unit Be careful not to spill water or other liquids on theunit, or to get combustible or metallic materialinside the body. If used with foreign matter inside,t...

Page 5 - Operating Controls and Their Functions

Operating Controls and Their Functions 5 1. Tripod adaptor This adaptor can also be attached on the bottom of the camera. 2. Lens mount cap3. TELE Key When push the TELE KEY, picture is telephoto 4. WIDE Key When push the WIDE KEY, picture is wide angle 5. Focus Near Key In a manual situation, focus...

Page 6 - Adjust voltage from 1 pin and 2 pin

Power In / Control 6 You can adjust focus and zoom by a pin terminal on the back sideof the camera. 1 4 3 5 6 2 * is the color of the cable.(If it is offered) Adjust voltage from 1 pin and 2 pin

Page 8 - MENU DESCRIPTIONS; TELE

MENU DESCRIPTIONS 8 Using TELE, WIDE, FOCUS+, FOCUS- button • TELE and WIDE are used for UP and DOWN . • FOCUS+ and FOCUS- are used for INCREASE and DECREASE the data. page 9 page 10page 12page 14page 17page 19page 20page 21page 22

Page 9 - CAMERA ID

CAMERA ID 9 1. CAMERA ID To connect a large number of camera , It can beassigned to identification number to each camera forcamera control easily. (OFF, 0 - 255 : total numbers of ID are 256) • It only can be set this function using ID commend. To transfer ID Code of camera , In first byte at PC con...

Page 10 - FOCUS MODE SET

PUSH 2. Focus Set : 2-1. Focus Mode Set :This function is for focus mode setting A) Set up “FOCUS SET” in main menu using Menu key. Select the “FOCUS MODE” in submenu using Tele/Widekey. And then set the mode (Auto, Push auto, or Manual)using Focus key. 2-2. Focus Distance Set :This function is for ...

Page 12 - AWB SET

3. AWB SET 3-1. WB Mode Set :This function is for changing the WB mode. A) Set up “AWB SET” in main menu using Tele/wide key.B) Select the “WB MODE” in submenu using Tele/wide key.C) Set the mode Auto, Push auto , Manual, Outdoor, Indoor,Special using Focus key. *WBC MODE ; Use for changing White Ba...

Page 14 - AE SET

4. AE SET 4-1. AE Mode Set :This function is for changing to AE mode. A) Set up “AE SET” in main menu using Tele/wide key.B) Select the “AE MODE” in submenu using Tele/wide key.C) Set the mode auto, IRIS MAN, AGC MAN, Manual, Auto usingFocus key. 4-2. IRIS ADJUST Set :This function is available for ...

Page 17 - SPECIAL SET

SPECIAL SET 17 5. SPECIAL SET 5-1. User Title Set :This function is for custom title on screen display. A) Set “SPECIAL SET” in main menu using Tele/wide key.B) Select the “USER TITLE” in submenu using Tele/wide key.C) Set the position of title and set data using Tele / Wide,Focus key. 5-2. SHARPNES...

Page 18 - This function is exit to main menu.

5-5. NEGATIVE Set :This mode is to change color and luminance to negative. A) Select the “COLOR” in submenu using Tele/wide key.B) Select the mode ON, OFF using Focus key. 5-6. WIDE BURST Set :This mode is to change color burst width for long dis-tance application. A) Select the “WIDEBURST” in subme...

Page 19 - MOTION DET; MOTION DETECTION SET

MOTION DET 19 6. MOTION DETECTION SET 6-1. DETECTION Mode Set : A) Set “MOTION” in main menu using Tele/wide key.B) Select the “DETECTION” in submenu. Using Tele/wide key.C) Set the mode ON, OFF using Focus key. 6-2. LEVEL ADJUST Set :This function is available for DETECTION ON mode. A) Select the “...

Page 22 - WDR SET

9. WDR SET (OPTION) 9-1. WDR SET A) Select the “WDR” in main menu using Tele/wide key.B) Select the “WDR CONTROL” in submenu using Tele/wide key.C) Select the WDR mode what you want in submenu using Focus key. * Mode sequence : OFF -- ON -- AUTO* WDR Auto mode is working at the condition of high lig...

Page 23 - On Screen Display

On Screen Display 23 Some of these functions willbe displayed every time thec a m e r a i s o p e r a t e d a n dt h e n d i s a p p e a r e d a f t e r 5seconds. FUNCTION OSD Format Description 1. Focus Mode Non display Auto Mode Manual / push Auto Mode 2. Back Light Non display Back Light OFF “BL”...

Page 25 - Specifications

25 Specifications Image device 1/4" interline transfer CCD NTST, High resolution : 811(H) X 508(V) 410K NTST, Normal resolution : 537(H) X 505(V) 270K PAL, High resolution : 795 (H) X 596 (V) 470K PAL, Normal resolution : 537(H) X 597(V) 320K Sync system Internal sync Horizontal resolution Appro...

LG LVC-C311HM - Manual

Table of Contents:

Summary

Other LG Models