LG L2000CP-BF - User Manual

Page 2 - Important Precautions; On Safety; Do not Open the Display:; On Installation

1 Important Precautions This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules ...

Page 3 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.

2 Important Precautions Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the releaseof heat generated during operation. If these openings a...

Page 4 - Connecting the Display; Connecting the stand base or Removing the stand base; Insert the hooks into slots.; Important; Once you connect the stand base, try not to disconnect it.; Screw

Connecting the Display 3 100 Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Connecting the stand base or Removing the stand base 1 . Place the monitor with its front facing downward on a cushion or soft cloth. 2 . Al...

Page 5 - Positioning your display; Ergonomic; You can rotate the panel 90

4 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~25˚ Swivel :350 ˚ Ergonomic I...

Page 6 - Using the Computer; Power Cord; Press button on the front switch panel to turn the power; NOTE

5 Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. To adjust height of your monitor, unlock the stand lock on top of the stand. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 3....

Page 7 - Control Panel Functions; Front Panel Controls; MENU Button; Use this button to enter or exit the On Screen Display.; Control; The message; MENU button; for several seconds. The message; Buttons

6 Control Panel Functions Front Panel Controls MENU Button Use this button to enter or exit the On Screen Display. Control Function OSD LOCKED/UNLOCKED This function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for severa...

Page 8 - Use this button to turn the display on or off.; Power Button; AUTO IMAGE ADJUSTMENT; button before entering the On Screen

7 Control Panel Functions This Indicator lights up blue when the displayoperates normally(On Mode). If the display is in SleepMode (Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a selection ...

Page 9 - On Screen Display (OSD) Control Adjustment; Screen Adjustment

8 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. Ashort example is given below to familiarize you with the use of the controls.The followin...

Page 10 - On Screen Display(OSD) Selection and Adjustment; PICTURE; POSITION VERTICAL; FLATRON

9 NOTE The order of icons may differ depending on the model (9~13). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. To adjust the brightness,contrast and gamma of thescreen PICTURE COLOR POSITION TRACKING ...

Page 11 - Press the MENU Button, then the main menu of the OSD appears.; P I C T U R E

10 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the a...

Page 12 - Main menu

11 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues di...

Page 13 - TRACKING

12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripesvisible on the screen background.Thehorizontal screen size will also change. To adjust the focus of the display. Thisitem allows you to remove anyhorizontal...

Page 14 - Main menu Sub menu; Select the sub-menu using the; : For animation images in videos or movies

13 On Screen Display(OSD) Selection and Adjustment Icons Menu Name Sub-menu Name Main menu Sub menu Description To adjust the USER sub-menu function, Press the SET Button MOVIETEXT NORMAL B R I G H T N E S S A C E 1 2 R C M S A V E U S E R M E N U SET USER When you execute F-ENGINE, two tones will a...

Page 15 - Troubleshooting; Check the following before calling for service.; No image appears; Press the Power button.; button for; “OSD UNLOCKED”

14 Troubleshooting No image appears Check the following before calling for service. No image appears Is the power cord of thedisplay connected? Is the power indicatorlight on? Is the power on and thepower indicator blue orgreen? Is the power indicatoramber? Do you see an "OUTOF RANGE" messag...

Page 16 - Display image is incorrect; H position and V position

15 Troubleshooting Display image is incorrect Display Position isincorrect. On the screenbackground, verticalbars or stripes arevisible. Any horizontal noiseappearing in anyimage or charactersare not clearlyportrayed. The screen color ismono or abnormal. The screen blinks. Press the AUTO/SET button ...

Page 17 - Have you installed the display driver?

16 Troubleshooting Have you installed the display driver? Have you installed thedisplay driver? Do you see an"Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? Be sure to install the display driver from thedisplay driver CD (or diskette) that comes withyour display. Or, you...

Page 18 - Specifications; Information in this document is subject to change without notice.

17 Specifications 20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD Anti-Glare coatingVisible diagonal size: 51.0cm0.255mm pixel pitch Horizontal Freq. 28 - 83kHz (Automatic) Vertical Freq. 56 - 85Hz (Automatic) Input Form Separate SyncComposite SyncSOG (Sync On Green) , Digital Signal Input 15 ...

Page 19 - Indicator; LED Color

18 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 10111213141516 *17 **18 640 x 350640 x 480640 x 480640 x 480720 x 400800 x 600800 x 600800 x 600832 x 624 1024 x 7681024 x 7681024 x 7681152 x 8701152 x 900 1280 x 10241280 x 1...

Page 20 - How to Install the VESA Standard wall mounting; VESA wall mounting

19 How to Install the VESA Standard wall mounting VESA wall mounting Connected to another object (stand type and wall-mounted type. This monitor accepts a VESA-compliant mounting interface pad.- optional ) For further information, refer to the VESA WallMounting Instruction Guide. Kensington Security...

Page 21 - Digitally yours