LG L1942T-BF - User Manual - manualsarea.com

Page 2 - On Safety; Do not Open the Display.; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential electrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, ...

Page 3 - On Installation; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place thedisplay where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink,laundry tub, in a wet basement, or near a ...

Page 4 - Connecting the Display; Important; Connecting the stand; Tie down the base lock to perpendicularity direction.

A3 Connecting the Display Important This illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Do not carry the product upside down holding only the stand base. The product mayfall and get damaged or injure your foot. Before setting up the m...

Page 5 - Disassembling the stand

A4 Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on aflatsurface. 3. Change your lock on the product as it follows and turn it in the arrow direction. 2. Place the monitor face Down onthe cushion or soft cloth. If you can't release the stand base even the locking knob...

Page 6 - Positioning your display; Ergonomic

A5 Connecting the Display 20 Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ Ergonomic It is recom...

Page 7 - Using the Computer; NOTE

A6 Connecting the Display Wall-outlet type Power Cord Analog signal D-sub Digital signal DVI PC-outlet type DVI-D (This feature is not available in all countries.) Mac adapter For Apple Macintosh use, a separate plugadapter is needed to change the 15 pin highdensity (3 row) D-sub VGA connector on th...

Page 8 - Control Panel Functions; Front Panel Controls

Control Function A7 Control Panel Functions MENU Button Use this button to enter or exit from the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, sothat these settings are not inadvertently changed. To lock theOSD settings, press and hold the MEN...

Page 9 - Power Button; Control Function

A8 Control Panel Functions This Indicator lights up as blue when the display isoperating normally(On Mode). If the display is inSleep Mode (Energy Saving), this indicator changesto flicker. Use this button to turn the display on or off. Power Button Power Indicator Use this button to select an icon ...

Page 10 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; MENU Button

A9 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The follow...

Page 11 - On Screen Display(OSD) Selection and Adjustment; PICTURE; FLATRON

A10 NOTE The order of icons may differ depending on the model (A10~A15 ). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. To adjust the brightness,contrast and gamma of thescreen PICTURE COLOR TRACKING SET...

Page 13 - Main menu

A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues d...

Page 17 - Troubleshooting; Check the following before calling for service.; No image appears

A16 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator blue orgreen? ● Is...

Page 18 - Display image is incorrect

A17 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO/SET button to automatically adjust your display image t...

Page 19 - Have you installed the display driver?; Have you installed the; The screen color is

A18 Troubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdispla...

Page 20 - Specifications

A19 A19 Specifications 17 inch NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play PowerConsumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Signal cable Power cord 17 inches (43.2 cm)...

Page 22 - Indicator; LED Color

A21 Specifications Indicator On Mode Sleep Mode Off Mode blue flicker Off LED Color MODE Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 1011 *12 **13 640 x 350720 x 400640 x 480640 x 480800 x 600800 x 600832 x 624 1024 x 7681024 x 7681152 x 8701152 x 900 1280 x 10241...

Page 23 - Installing the Wall mount plate; Kensington Security Slot

A22 Installing the Wall mount plate Wall mount plate(Separate purchase) This is stand-type or wall mount type and isconnectable with Wall mount plate.Please refer to the installation guide for moredetails, which is provided when Wall mountplate is purchased. Kensington Security Slot Connected to a l...

Page 24 - Digitally yours