Page 2 - On Safety; Do not Open the Display:; On Installation; Important Precautions
A1 This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules for its installation,...
Page 3 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.
A2 Important Precautions Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the releaseof heat generated during operation. If these openings ...
Page 4 - Connecting the Display; Connecting the stand
A3 Connecting the Display Important This illustration depicts the general model of connection. Your monitor may differ from theitems shown in the picture.Do not carry the product upside down holding only the stand base. The product may fall andget damaged or injure your foot. Before setting up the m...
Page 5 - Disassembling the stand
A4 Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on aflatsurface. 2. Place the monitor face Down onthe cushion or soft cloth. 3. Hold the Head Part with one hand andhold the Stand Base Part with theother as shown in the picture and pullthe Stand Base Part lightly upwa...
Page 6 - Positioning your display
A5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ Ergonomic It is recommen...
Page 7 - Using the Computer
A6 Using the Computer 1. Make sure to turn off the computer and product. Connect the cable as below sketch mapform to . 1 2. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'SelfImage Setting Function' is executed automatically. 2 Connecting the Disp...
Page 8 - Control Panel Functions; AUTO Button; Front Panel Controls
A7 Control Panel Functions AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). This will automatically adjust your displayimage to the ideal settings for the current screenresolution size (display mode). The...
Page 9 - Power Button
A8 Control Panel Functions This Indicator lights up blue when the display operatesnormally(On Mode). If the display is in Sleep Mode(Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a selection...
Page 10 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; To make adjustments in the On Screen Display, follow these steps:
A9 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The follow...
Page 11 - On Screen Display(OSD) Selection and Adjustment; PICTURE
A10 NOTE The order of icons may differ depending on the model (A10~A14). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. PICTURE COLOR POSITION TRACKING SETUP Main menu Sub menu Reference PRESET sRGB 6500K...
Page 12 - Press the MENU Button, then the main menu of the OSD appears.; P I C T U R E
A11 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the ...
Page 13 - Main menu; COLOR
A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA Adjusts the brightness of the screen. Adjusts the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues displ...
Page 14 - TRACKING; POSITION
A13 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE SHARPNESS Adjusts any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange. Adjusts the focus of the display. This item allows you to remove anyhorizontal noi...
Page 15 - SETUP
A14 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description MENU : Exit : Adjust: Adjust SET : Select another sub-menu SETUP S E T U P S E T U P If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function ag...
Page 16 - Troubleshooting; Check the following before calling for service.; No image appears
A15 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power on and the power indicator blue orgreen? ● Is the power indicator amber? ● Do yo...
Page 17 - Display image is incorrect
A16 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. ● The screen color is mono or abnormal. ● The screen blinks. • Press the...
Page 18 - Have you installed the display driver?; Have you installed the; • Be sure to install the display driver from the display
A17 Troubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdispla...
Page 19 - Specifications L1734S
A18 A18 Specifications L1734S NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play PowerConsumption Dimensions & Weight Range Power Input Environmental Conditions Stand Base Power cord 17 inches (43 cm) Flat Panel Active m...
Page 20 - Specifications L1734SE
Specifications L1734SE A19 NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play PowerConsumption Dimensions & Weight Range Power Input Environmental Conditions Stand Base Power cord 17 inches (43 cm) Flat Panel Active matr...
Page 21 - Specifications; Indicator
A20 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 1011 *12 13 640 x 350720 x 400640 x 480640 x 480800 x 600800 x 600832 x 624 1024 x 768 1024 x 7681152 x 8701152 x 900 1280 x 10241280 x 1024 31.46931.46931.46937.50037.87946.8...
Page 22 - Installing the Wall mount plate
A21 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate orthe interchange device. 1. Put a cushion or soft cloth on aflatsurface. 2. Place the monitor face Down onthe cushion or soft cloth. 3. Hold the Head Part with one hand andhold the Stand Base Part ...
Page 23 - Install the Wall mount plate.
A22 Installing the Wall mount plate Wall mount plate(Separate purchase) This is stand-type or wall mount type and isconnectable with Wall mount plate.Please refer to the installation guide for moredetails, which is provided when Wall mountplate is purchased. Kensington Security Slot Connected to a l...
Page 24 - Digitally yours
