LG L1553S-SF - User Manual - manualsarea.com

Page 2 - On Safety; Do not Open the Display.; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential eletrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, u...

Page 3 - On Installation; screen because over-spraying may cause electrical shock.; On Repacking

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a ...

Page 4 - Connecting the Display; Important; Once you connect the stand base, try not to disconnect it.; Connecting the stand; Place the monitor with its front facing downward on a soft cloth.

Connecting the Display A3 Important This illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture. Once you connect the stand base, try not to disconnect it. Do not carry the product upside down holding only the stand base. The product mayfall ...

Page 5 - Positioning your display; Ergonomic

A4 Connecting the Display 20 Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ Ergonomic It is recom...

Page 6 - DC Power Cord; Press button on the front switch panel to turn the power on.; NOTE; Using the Computer; close to the display.

2 1 A5 Connecting the Display Wall-outlet type MAC DC Power Cord Mac adapter For Apple Macintosh use, a separate plug adapter is needed to changethe 15 pin high density (3 row) D-sub VGA connector on the suppliedcable to a 15 pin 2 row connector. 4. Press button on the front switch panel to turn the...

Page 7 - Control Panel Functions; MENU Button; Use this button to enter or exit the On Screen Display.; Control; The message; MENU button; for several seconds. The message; Buttons; Front Panel Controls

A6 Control Panel Functions MENU Button Use this button to enter or exit the On Screen Display. Control Function OSD LOCKED/UNLOCKED This function allows you to lock the current controlsettings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds. The messa...

Page 8 - Use this button to turn the display on or off.; Power Button; button before entering the On Screen

A7 Control Panel Functions This Indicator lights up green or blue when the displayoperates normally(On Mode). If the display is in SleepMode (Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a ...

Page 9 - Screen Adjustment; On Screen Display (OSD) Control Adjustment

Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The following section is an outline of the available adj...

Page 10 - On Screen Display(OSD) Selection and Adjustment; PICTURE; POSITION

A9 NOTE The order of icons may differ depending on the model (A9~A13). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. PICTURE COLOR POSITION TRACKING SETUP Main menu Sub menu Reference PRESET 6500K 9300K ...

Page 11 - Press the MENU Button, then the main menu of the OSD appears.; P I C T U R E

A10 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the ...

Page 12 - Main menu

A11 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues d...

Page 13 - TRACKING

A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange. To adjust the focus of the display. This item allows you to remove anyhorizont...

Page 15 - Troubleshooting; Check the following before calling for service.; No image appears

A14 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator blue orgreen? ● Is...

Page 16 - Display image is incorrect

A15 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. ● The screen color is mono or abnormal. ● The screen blinks. • Press the...

Page 17 - Have you installed the display driver?; Have you installed the; • Be sure to install the display driver from the display

A16 Troubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdispla...

Page 18 - Specifications; Information in this document is subject to change without notice.

Specifications 15 inch A17 Display Sync Input Video Input Resolution Plug&Play PowerConsumption Dimensions &Weight Tilt Range Monitor Power Input Adapter Power Input Environmental Conditions Stand Base Signal cable Power cord NOTE Information in this document is subject to change without not...

Page 19 - Indicator; LED Color

A18 Specifications Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1234567 *8 640 x 350720 x 400640 x 480640 x 480800 x 600800 x 600832 x 624 1024 x 768 31.46931.46831.46937.50037.87946.87549.72548.363 7070607560757560 VGAVGAVGAVESAVESAVESAMACVESA Indicator On Mode Sleep Mode O...

Page 20 - How to Install the VESA Standard wall mounting; VESA wall mounting

A19 How to Install the VESA Standard wall mounting VESA wall mounting Connected to another object (stand type and wall-mounted type. This monitor accepts a VESA-compliant mounting interface pad.- optional ) For further information, refer to the VESA WallMounting Instruction Guide. Kensington Securit...

Page 21 - Digitally yours