Page 2 - Important Precautions; On Safety; The appliance coupler is used as the disconnect device.; Do not Open the Display:
1 Important Precautions This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules ...
Page 3 - On Installation; Avoid high temperatures and humidity.
2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place thedisplay where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink,laundry tub, in a wet basement, or near a s...
Page 4 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.
Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub...
Page 5 - Accessories; NOTE
4 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor.If any items are missing, contact your dealer. NOTE This accessories may look different from those shown here.User must use shielded signal interface cables (D-sub 15 pin cable,...
Page 6 - Connecting the Display; Positioning your display; IMPORTANT
5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices is turned off. Positioning your display -After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum c...
Page 7 - Connecting with the PC
6 Connecting the Display E2281TR A B Connect DVI-D(Digital signal) CableConnect D-sub(Analog signal) Cable 1. Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. 2. Connect signal input cable and power cord in order, then...
Page 8 - is executed automatically.
Connecting the Display E2281TR 7 NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjuststhe display to optimal settings for individual input signals. ‘AUTO’ Function?...
Page 9 - Connect HDMI Cable
8 A B Connect DVI-D(Digital signal) CableConnect D-sub(Analog signal) Cable 1. Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. 2. Connect signal input cable and power cord in order, then tighten the screwof the signal...
Page 11 - Control Panel Functions; Front Panel Controls
10 Control Panel Functions Front Panel Controls E2281VR/E2381VR E2281TR/E2281VR/E2381VR
Page 12 - AUTO Button; AUTO IMAGE ADJUSTMENT; MENU Button; MENU button
11 Control Panel Functions AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only Analog Mode) This will automatically adjust your display image to theideal settings for the current screen resolution size(display mode). Th...
Page 13 - INPUT Button; Use this button to turn the display on or off.; EXIT Button; Use this button to select source from input.
12 Control Panel Functions INPUT Button Use this button to turn the display on or off. The power indicator stays blue if the display is runningproperly (On Mode). If the display is in Sleep Mode(Energy Saving), the power indicator is red. Power Button &Power Indicator (SOURCE Hot key) Exit the O...
Page 14 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; Button
13 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size and operating parameters ofthe display is quick and easy with the On Screen Display Controlsystem. A short example is given below to familiarize you with the use of thecontrols. The following section...
Page 16 - On Screen Display(OSD) Selection and Adjustment; The order of icons may differ depending on the model (15 to 26).
15 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. To customize the screen statusfor a user's operatingenvironment To adjust the black level of thescreen To customize the color of thescreen MENU To adjust ...
Page 17 - Menu; Move to the upper menu; Press the; MENU; Button, then the main menu of the OSD appears.
16 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using theOSD system. Listed below are the icons, icon names, and icon descriptions of theall items shown on the Menu. Sub-menus NOTE OSD (On Screen Display) menu languages on th...
Page 19 - To adjust the brightness of the screen.; WIDE; Exit
18 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description To adjust the brightness of the screen. HIGH E2281TR E2281VR/E2381VR Change the input image signal ratio tooriginal. WIDE ORIGINAL Switch to full screen mode according toinput image signal. * This function works only i...
Page 20 - WARM; COOL; As the criteria for video
19 On Screen Display(OSD) Selection and Adjustment WARM MEDIUM Main menu Sub menu Description 3 HIGH 3 E2281TR PRESET E2281VR/E2381VR COOL Set the screen to warm color temperature . Set the screen to cool color temperature. Set the screen to medium color temperature. You can set the offset level. If...
Page 22 - Restore all factory default settings except
21 On Screen Display(OSD) Selection and Adjustment Press the , buttons to resetimmediately. Restore all factory default settings except "LANGUAGE." Main menu Description HIGH E2281TR E2281VR/E2381VR : Move to the upper menu: Decrease: Increase: Select another sub-menu Exit : Exit
Page 24 - : Move to the upper menu; EXIT; NORMAL
23 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description : Move to the upper menu , : Move EXIT : Exit * Noise may exist according to SR(SUPER+ RESOLUTION) Mode, so enjoy the clear image by selecting SR(SUPER+ RESOLUTION) Mode according to the Contents. Select this when you ...
Page 25 - SUPER ENERGY SAVING; Restart to select sub-menu
24 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using theOSD system. Listed below are the icons, icon names, and icon descriptions of theall items shown on the Menu. Sub-menus NOTE OSD (On Screen Display) menu languages on th...
Page 26 - : How much power is saved during using the monitor.
25 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Turn on the SUPER ENERGYSAVING fuction.When current setting value isON,the SUPER SAVING color isgreen. Turn off the SUPER ENERGYSAVING function.Now the monitoris LED SAVING function.When current setting value isOFF,the...
Page 28 - Troubleshooting; Check the following before calling for service.; No image appears
27 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power indicator red? ● Do you see an "OUT OF RAN...
Page 29 - Display image is incorrect; Check
28 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO button to automatically adjust your display image to the...
Page 30 - The screen color is; The Audio function is not working
29 Display image is incorrect Troubleshooting ● The screen color is mono or abnormal. ● The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than ...
Page 31 - Specifications; Operating Conditions
30 Specifications E2281TR 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm0.248 mm x 0.248 mm (Pixel pitch) Display Horizontal Freq. 30 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 75 Hz (Automatic) Input Form Separate Sync.Digital Sync Inp...
Page 34 - Indicator; LED Color; HDMI Video Input
33 Indicator On Mode Sleep Mode Off Mode Blue Red Off LED Color MODE Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) *Recommend Mode 123456789 1011 *12 720 x 400640 x 480640 x 480800 x 600800 x 600 1024 x 7681024 x 7681152 x 864 1280 x 10241280 x 10241680 x 10501920 x 1080 31.4...
Page 35 - MODEL
As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. E N E RGY STA R i s a s et o f p owe r- s a v i n g guidelines issued by the U.S. Environmental Protection Agency(EPA). Make sure to read the Important Precautions bef...
