LG 65EU960H - User Manual

ENGLISH 5 Preparing • When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. • Image shown may differ from your TV. • Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. • The ava...

ENGLISH 6 Lifting and Moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. • It is recommended to move the TV in the box or packing material that the TV originally came in. • Bef...

ENGLISH 7 • Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.) • If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which ma...

ENGLISH 8 • Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. • For more information of screws and wall mount bracket, refer to the Separate purchase. • If you intend to mount the product to a wall, attach VESA standard mounting interface (optio...

ENGLISH 9 (Only UHD models) • (Q.Settings) ( ) [Picture] [Additional Settings] [HDMI ULTRA HD Deep Color] - On : Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0) - Off : Support 4K @ 60 Hz 8 bit (4:2:0) • If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. H...

ENGLISH 10 Network setup Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication.Connect the port of the Modem or Router from Pro:Centric server to the port on the TV. 2 1 Broadb...

ENGLISH 11 Using Magic Remote Control (Depending upon model)The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.When the message “Magic Remote battery is low. Please change the battery.” is displayed, replace the ...

ENGLISH 12 Registering Magic Remote Control How to register the Magic Remote Control To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control. * If the TV fails to...

ENGLISH 14 Settings To select Picture Mode (Q.Settings) ( ) [Picture] [Picture Mode Settings] [Picture Mode] Select the picture mode optimized for the viewing environment or the program. • [Vivid] Heightens contrast, brightness and sharpness to display vivid images. • [Standard] Displays images in s...

ENGLISH 15 Specifications Product specifications may be changed without prior notice due to upgrade of product functions.Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).The actual energy consumption depe...

ENGLISH 17 My Media Supported Files • External supported subtitle formats: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) • Internal supported subtitle formats: Matroska (mkv): Sub Station Alpha (SSA), Advanced Sub Station Alp...

ENGLISH 18 Important Information for Preventing Image Retention OLED is a self-emissive technology, which brings many significant benefits to image quality and performance. As with any self-emitting display, it is possible for users of OLED TVs to experience temporary image retention under certain c...

ENGLISH 19 KEY CODES * This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 / Wheel (Up) R/C Button 43 (Q.Settings) R/C Button 01 / Wheel (Down) R/C Button 45 (Screen Remote) R/C Button 02 R/C Button 4C (Dash) R/C Button 03 R/C Button 7C (Home) R/C But...

ENGLISH 20 EXTERNAL CONTROL DEVICE SETUP * Image shown may differ from your TV.* Cable is not provided.* The connection interface may differ from your TV. RS-232C Setup • Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system...

ENGLISH 21 Connector type : D-Sub 9-pin male 1 6 5 9 RS-232C (Serial port) RS-232C configurations 7-Wire Configurations(Standard RS-232C cable) 3-Wire Configurations(Not standard) PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DTR DSR 6 4 DSR RTS 7 8 RTS CTS 8 7 CTS D-Sub 9 D-Sub 9 PC TV RXD 2 3 ...

ENGLISH 22 Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list * (Depending upon model) COMMAND1 COMMAND2 DATA (Hexadecimal) 1 Power k a 00 to 01 2 [...

ENGLISH 23 TRANSMISSION / RECEIVING PROTOCOL * (Depending upon model) Transmission (Command1)(Command2)( )([Set ID])( )(Data)(Cr) (Command 1) : First command to control the TV. (j, k, m or x)(Command 2) : Second command to control the TV.([Set ID]) : You can adjust the set ID to choose desired monit...

ENGLISH 27 IR OUT Using Guide Suitable / Not Recommend remote-controller data format Item Data format code Note Suitable Data Format NEC, Toshiba Full Repeat Code Format Single : EnableRepeat : Enable Philips RC5, RC6 Code FormatZenith Code Format Not Recommend Data Format Matsushita, RCA Code Forma...

ENGLISH 28 Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright...

ENGLISH 29 Regulatory FCC NOTICE (For USA)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This...

ENGLISH 30 RSS-247 Requirement (For Canada) [For product having the wireless function using 5 GHz frequency bands] (1) The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (2) For devices wi...

THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed accordin...

OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com

4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port.* The connection interface may differ from your TV....

6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...