LG 55XS2B-B - User Manual

5 ENGLISH WARNING Precautions in Using/Cleaning the Product • Do not attempt to disassemble, repair or modify the product yourself . ► Fire or electric shock can occur. ► Contact LG Customer Service for repair. • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to ...

6 ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com . The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ...

7 ENGLISH LICENSES ASSEMBLY AND PREPARATION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of unauthorized components. CAUTION • The accessories provided with your product may vary depending on the mo...

8 ENGLISH 55XS2B 7 8 6 5 4 3 (Illuminance sensor / IR Receiver) (Power Indicator) 1 2 Screen Buttons Parts and Buttons 49XF2B (Illuminance sensor / IR Receiver) 1 (Power Indicator) 2 55XF2B (Illuminance sensor / IR Receiver) 1 (Power Indicator) 2 49XS2B

9 ENGLISH • 1 Illuminance sensor : Adjusts the screen brightness by measuring the amount of light. IR Receiver : This is where the unit receives signals from the remote control. • 2 Power Indicator : This Indicator lights up red when the display operates normally (on mode). If the display is in slee...

10 ENGLISH 1 Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Using a screwdriver, remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor. 2 After removing the screw, remove the LG Logo. When re-attaching the LG Logo, repeat the p...

11 ENGLISH • Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. • If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount and contact your local dealer or qualified personnel to assist ...

13 ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly.To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartme...

15 ENGLISH MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect.For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cable...

16 ENGLISH • If you set the tile mode using DVI-D or HDMI, you will not be able to watch HDCP-encrypted content. • If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable. • DP Cable - Use a DP cable that is certified to DP 1.1a standard or high...

17 ENGLISH Using the Input List y HDMI1 -> HDMI2 -> DISPLAYPORT -> DVI-D • Do not turn off the monitor or remove a USB storage device when the My Media screen is activated. This could result in loss of files or damage to the USB storage device. • Back up files you have saved on a USB storag...

19 ENGLISH Files Supported by My Media Supported External Subtitle Format • *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema To use Select Play, Photos/ Videos/ Music • Play Selection: plays back selected content. To set Device S...

22 ENGLISH Viewing Videos Play video files on display. All of the saved video files are shown in your display. To play video files on display Videos Tips for Playing Video Files • Some user-created subtitles may not work properly. • Some special characters in subtitles are not rendered. • HTML tags ...

23 ENGLISH Viewing Photos The displays on the screen may differ from the model. Viewing image files Photos Listening to Music Viewing music files Music • Files with unsupported extensions are not displayed. • If a file is invalid, a broken image and the message unrecognizable file are displayed. • D...

24 ENGLISH SuperSign Contents Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option Only contents distributed by SuperSign Manager are displayed and selectable. You can move, copy, or delete files. To move, copy, or delete files • You c...

25 ENGLISH 2 Press the red ON button on the remote control to assign the PICTURE ID . 3 Assign the Set ID to the selection of your choice. • A set with a different Set ID from the PICTURE ID cannot be controlled by IR signals. 1 Assign the Set ID to the installed monitors as shown below . PICTURE ID...

26 ENGLISH User Settings Main Menu Settings Quick Settings Configures frequently used settings menus. To turn your monitor on or off automatically Quick On Timer/Off Timer You can set the On/Off Timer for your monitor. If you do not want to set the On/Off Timer , select Off in Repeat. To set the bac...

27 ENGLISH Picture Settings To Select Picture Mode Picture Picture Mode Select the picture mode that is best suited to the video type. • Vivid : adjusts the video image for a retail environment by enhancing the contrast , brightness, and sharpness . • Standard : adjusts the video image for a normal ...

31 ENGLISH Sound Settings To select a Sound Mode Sound Sound Mode The best sound quality will be selected automatically depending on the video type currently being watched. • Standard : this sound mode works well for content of all types. • News : optimizes sound for watching news. • Music : optimiz...

32 ENGLISH Network Settings To Set a Signage Monitor Name Network Signage Name You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard. To Set Your Network Network Wired Connection (Ethernet) • Connecting to a wired network: Connect your monitor to a l...

34 ENGLISH General Settings To configure the language General Menu Language Select one of the languages on the menu displayed on the screen. • Menu Language: sets a language for Signage. To set the time/date General Time & Date You can check or change the time. • Time: you can set the time manua...

36 ENGLISH TROUBLESHOOTING No image is displayed Problem Action Is the product power cord connected? y Check if the power cord is correctly plugged into the power outlet . Does the “Invalid Format” message appear? y The signal from the PC (graphic card) is out of the vertical or horizontal frequency...

39 ENGLISH PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. refers to alternating current (AC), and refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT)Liquid Crystal Display (LCD) Screen Vide...

43 ENGLISH IR CODES All models do not support the HDMI/USB function.Some key codes may not be supported depending on the model. Code (Hex) Function Remarks 08 Remote control button C4 ON Remote control button C5 OFF Remote control button 95 Energy Saving Remote control button 0B INPUT Remote control...

45 ENGLISH TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable Connect the RS-232...

46 ENGLISH Command Reference List COMMAND DATA(Hexadecimal) 1 2 01 Power k a 00 to 01 02 Select input x b See Select Input 03 Aspect Ratio k c See Aspect Ratio 04 Energy Saving j q See Energy Saving 05 Picture Mode d x See Picture Mode 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64 08 Sharpness...

48 ENGLISH Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes.* [Command2]: controls monitor sets.* [Set ID]: Used for selecting a set you want to control. A unique Set ID can be as...

www.lg.com Please read this manual carefully before operating your set and retain it for future reference. webOS 1.0 USER GUIDE LG Digital Signage (MONITOR SIGNAGE)

2 ENGLISH TABLE OF CONTENTS To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available ...

3 ENGLISH NOTE • The software-related contents may be changed without prior notice due to upgrade of the product functions. • Some features described in the User Guide may not be supported in certain models. USER SETTINGS Main Menu Settings Quick Settings Configures frequently used settings menus. T...

21 ENGLISH SuperSign Contents Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option Only contents distributed by SuperSign Manager are displayed and selectable. NOTE • If there is an AutoPlay folder in the USB storage device and its fil...

25 ENGLISH TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable Connect the RS-232...

www.lg.com Please read this manual carefully before operating your set and retain it for future reference. webOS 1.0 INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE)

2 ENG ENGLISH CONTENTS ACCESSING INSTALLATION MENU ...... 3 INSTALLATION MENU ........................... 4 - Signage Setup ................................................................. 4 - USB Cloning .................................................................... 8 - Password Change ........

3 ENG ENGLISH ACCESSING INSTALLATION MENU NOTE y y Images in the manual may look different from the actual product. 1 Press and hold the SETTINGS button for 5 seconds. S.MENU AUTO MUTE MENU 2 When Toast (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 ) 3 W...

4 ENG ENGLISH INSTALLATION MENU NOTE y y Some features described in the Installation manual may not be supported in certain models. Signage Setup Use this menu to configure the digital signage after installation. Power On Status y y You can select the operating status of the monitor when the main po...

6 ENG ENGLISH Power On Delay (0 ~ 250) y y This feature delays power on in order to prevent overload when multiple monitor sets are turned on simultane-ously. y y You can set the delay interval in the range of 0 to 250 seconds. Digital Audio Input y y HDMI/DISPLAYPORT: you can hear the sounds of dig...

7 ENG ENGLISH BLU Maintenance Mode y y Enables or disables the luminance maintenance function. y y If turned On, the luminance maintenance function is enabled. (XF2B, XF3C: Luminance 2500 nit) y y If turned Off, the luminance maintenance function is disabled. (XF2B: Luminance 2500 nit, XF3C: Luminan...

8 ENG ENGLISH USB Cloning You can copy the product settings to other sets. Send to USB y y You can save the current settings in file format to a USB device. y y Select the file name and press the OK button to complete y y You cannot save the following items: Advanced Control under PICTURE, Clock, Sl...

9 ENG ENGLISH Tile Mode You can configure the integrated screen in the same way as each screen is configured. To use this function - Must be used with multiple monitors. - Must be operated after connecting the monitors using DP Cable and distributor. - Tile mode: row x column (r = 1 to 15, c = 1 to ...

10 ENG ENGLISH Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. OffWhen the Tile Mode option is disabled 1X2When using 2 monitors ID 1 ID 2 Tile ID 2X2When using 4 monitors 3X3When using 9 monitors ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID 4 ID 5 ID 3 ID 6 ID 7 ID...

11 ENG ENGLISH Fail Over The input source with the highest priority will be selected. Off y y The Auto-Fail Over feature is disabled. Auto y y The input source changes according to the specified order. When several input sources are found, the input source with the highest priority will be selected....

12 ENG ENGLISH ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode y y Selects the desired ISM Method mode. y y Normal : Disables the ISM method. y y Inversion: Inverts screen ...

14 ENG ENGLISH Server Set Automatically y y The monitor set will be set automatically so that the SuperSign server can search it. Server IP y y This is a menu where you can set an IP address for the SuperSign server. Server Status y y Server Status displays the status of the connection between your ...