LG 55XE4F-B - User Manual

5 ENGLISH • If water or any foreign substance goes inside the product, disconnect the power cord immediately and contact the service center. - Otherwise, this may cause a fire or electric shock due to damage to the product. • Keep the power cord or AC adapter away from any heating devices. - The cor...

6 ENGLISH Precautions for Moving the Product WARNING • Contact the service center before moving the product. - It may cause electric shock and damage the product. • Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved. - You may be electrocuted...

7 ENGLISH Precautions for Installing the Product WARNING • Contact the service center before installing the product. - It can cause electric shock and damage the product. • Do not drop an object on or impact on the product. Keep out of reach of children and do not place toys or objects near the prod...

9 ENGLISH Precautions for Cleaning the Product WARNING • Keep the product clean at all times. - If you don’t clean the unit for a long time and it becomes covered in dust, it can cause fire or product damage. • When you need to clean the inside of the product, you must contact the service center. - ...

10 ENGLISH Precautions for Using the Product WARNING • Do not use the product in any environment with excessively high temperatures or humidity. • If you use the product for a long period of time, take a rest from time to time to protect your vision. - Extended viewing could result in impaired visio...

12 ENGLISH Precautions for Using the Remote control WARNING • Avoid places with high humidity. - It may cause electrical shock or damage the product. • Do not expose batteries to excessive heat, such as direct sunlight, open fireplace, and electric heaters. - It may cause fire and you may be injured...

13 ENGLISH Precautions for Experiencing Image Retention • Displaying a still image for a prolonged period of time may cause damage to the screen, resulting in image retention. Most third-party products have the same issue. The resulting damage is not covered by the product warranty. - Use a screen s...

14 ENGLISH ASSEMBLY AND PREPARATION CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. • When installing the product, please cover the interface cover completely. Also, ...

15 ENGLISH Product Contents The image may be different according to the model. Power Indicator IR Receiver/ Illuminance sensor • IR Receiver : This is where the unit receives signals from the remote control. • Illuminance sensor : Adjusts the screen brightness by measuring the amount of light. • Pow...

17 ENGLISH Installing in Landscape Orientation To install in landscape orientation, rotate the screen clockwise 90 degrees while facing it from the front. IR Sensor IR Sensor Installing the Product in a Tilted Position You can install the product by tilting it horizontally or vertically.You can tilt...

18 ENGLISH Installation Requirements Air flow direction • For cooling purposes, a fan is used to intake air through the inlet and hot air is discharged through the outlet. 49XE4F Air outlet Air inlet

20 ENGLISH Enclosure unit design Partition design guide • When making a case for the enclosure, make sure to separate the inlet and outlet with a partition. • Place sponge pads, etc., between the partition and the enclosure to completely block air flow.

22 ENGLISH Inlet and outlet designs • The aperture must be at least 50 % of the total aperture area. Single enclosure unit • Make sure to separate the inlet and outlet to prevent the air around one from entering the other. Case 1 Case 2 Partition Partition Partition

28 ENGLISH Surrounding Environment • Do not allow the absorption of the product, snow, etc. to accumulate in the air inlet/outlet. • Designed for use in dusty environments. CAUTION • Do not hang the enclosure on the ceiling or lay it on the floor.

29 ENGLISH Installing on a Wall For proper ventilation, make sure the product is installed at least 100 mm (3.9 inches) away from the walls on every side. Consult a professional installation company near you for details on installation. CAUTION • Disconnect the power cord before moving or installing...

30 ENGLISH Clearance for Wall Mounting When wall mounting the product, install a partition that separates the air from the inlet and exhaust. Failure to do so may result in malfunctioning of the product and will not be covered under warranty. Installing the outdoor unit only • When installing the en...

32 ENGLISH Clearance for Built-in Installation Installing the outdoor unit only 100 mm 100 mm 100 mm 100 mm • For proper ventilation, make sure the product is installed at least 100 mm (3.9 inches) away from the walls on every side. • Consult a professional installation company near you for details ...

34 ENGLISH Safety and Precaution Guide for Installation Direct Sunlight • While powered off, make sure the device is not exposed to direct sunlight for a prolonged period. - Protect the display with cloth or a box when storing the device after it has been powered off. - This can prevent faults such ...

35 ENGLISH Preventing Condensation Caution • Attaching Screws - Attach all of the interface cover and back cover screws of the product without omission. - If you fail to fasten any of the screws, moisture may enter the product and condensation may occur. Caution • Cabling - Insert the square rubber ...

39 ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartm...

41 ENGLISH MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect.For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cable...

43 ENGLISH When Installing a Media Player/PC Externally NOTE • If you set the tile mode using HDMI, you will not be able to watch HDCP-encrypted content. • If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable. • DP Cable - Use a DP cable that...

44 ENGLISH When Installing the HDBaseT Cable The HDBaseT CABLE Install • LAN cables are fairly resilient. Yet, any rough handling, such as tight tie wraps, clamping or stapling can damage the cable, compromising performance or even preventing signal transmission. Tie cables loosely with appropriate ...

46 ENGLISH HDBT support function 1 Set host mode (Shipment mode): , , , , 2 Set device mode (Device mode can be changed in settings.): , , , , 3 IR IN is disabled. When SET is off. 4 Even if set is off, it operates in DPM (sleep mode), WOL, SCREEN OFF & BACKLIGHT on mode. 5 The webcam connect se...

47 ENGLISH TROUBLESHOOTING Ů Each model may have different points to check. Ů For information on your PC settings, refer to the Windows Help. Issues Related to Use • The power won’t turn on. - Check if the power cord is correctly plugged into the power outlet. - When operating in below zero temperat...

51 ENGLISH PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions.“ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT)Liquid Crystal Display (LCD) Scre...

54 ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit  www.lg.com .  The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States an...

Please read this manual carefully before operation and retain it for future reference. webOS 4.0 www.lg.com USER MANUAL LG Digital Signage (MONITOR SIGNAGE)

ENGLISH 2 CONTENTS SETTINGS ......................................4 -Home .......................................................................................4 Global ButtonsDashboard[Content Manager] -Ez Setting .............................................................................5 [Vide...

ENGLISH 3 To obtain the source code under GPL, LGPL, MPL, and other open source licenses that have the obligations to disclose source code, that is contained in this product, and to access all referred license terms, copyright notices and other relevant documents please visit https://opensource.lge....

ENGLISH 4 NOTE • Software-related content may be changed without prior notice due to upgrades of the product functions. • Some features described in the User Manual may not be supported in certain models and countries. • SNMP 2.0 is supported. SETTINGS Home Global Buttons • [Position]: Navigate to t...

ENGLISH 5 Ez Setting [Video Wall] [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. • [Tile Mode]: Turn [Tile Mode] on or off. • [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors. • [Natural Mode]: Display the image excluding the are...

ENGLISH 14 General [Language] [General] [Language] You can select the menu language to be displayed on the screen. • [Menu Language]: Sets the language of your Signage monitor. • [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] [General] [System In...

ENGLISH 27 Display [Picture Mode] [Display] [Picture Mode] [Mode] This feature enables you to choose the optimal picture mode for your installation environment. • [Mall/QSR], [Transportation], [Education], [Gov./Corp.]: Display the picture optimally for your installation environment. • [General]: Di...

ENGLISH 32 No. Item Description 1 [Tiling Type] Select and set the mode according to the installation type of your Signage. • Stand-alone: Select and use this mode when you use only one unit. • Video Wall: Select and use this mode when using two or more multi-screen configurations. This mode require...

ENGLISH 38 [LED Local Dimming] Make the light areas of the screen lighter and the dark areas darker for maximum contrast. NOTE • Return to default settings by clicking [Admin] -> [Factory Reset]. [Low Latency] Reduces frame delay in the LED Signage. [Factory Calibration] Retrieves factory pixel c...

ENGLISH 39 Sound [Sound Mode] [Sound] [Sound Mode] [Sound Mode] The best sound quality will be selected automatically depending on the video type currently being watched. • [Standard]: This sound mode works well for content of all types. • [Cinema]: Optimize sound for watching movies. • [Clear Voice...

ENGLISH 42 Admin [Lock Mode] [Admin] [Lock Mode] [Home Dashboard Lock] When you set the Home Dashboard Lock, you can limit the change in the settings of the Home Dashboard. [USB Lock] This feature enables you to configure the USB lock feature so that settings or content cannot be changed. [OSD Lock]...

ENGLISH 44 CONTENT MANAGER Web Login • Different features are supported depending on the product. This Signage product comes with a feature that enables you to access it on your PC or mobile device. - Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided. •...

ENGLISH 54 ScreenShare This feature allows the screen of a user’s device such as a mobile or PC Windows to be shared with a display using a wireless connection such as WiDi or Miracast. How to Use [ScreenShare] [ScreenShare] 1 Connect according to the instructions provided by the guide that can be a...

ENGLISH 55 LG Presenter This feature is to display the PC (Windows or Mac OS) screen on the Signage monitor with wired/wireless connection to the PC. To use this feature, you need to install LG Presenter PC Client (“Client”) on the PC. You can use LG Presenter in the following ways. - Connect: Enter...

ENGLISH 56 Connect On Signage [LG Presenter] On PC 1 Go to www.lge.com/LGP to download the Client. 2 Install and run the downloaded Client. 3 Enter the username you want and press the button . 4 Select either auto search or manual search to connect your device. • Auto search - When the list of Signa...

ENGLISH 57 Screen Share 1 Select the screen you want to share and press the “Share” button. 2 To leave Screen Share, press the [STOP] button. CAUTION • if Screen Share does not work or won’t connect to the Signage device, check the firewall settings on your PC. Handover PC1: The PC where the client ...

ENGLISH 58 MANAGEMENT TOOLS Control Manager Control and check the status of the display through the Web browser.This function is available for PCs and mobile devices.Different features are supported depending on the product. Function • [Dashboard]: Display a summary of the product's status and provi...

ENGLISH 59 Picture ID [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. Setting [Picture...

ENGLISH 60 TOUCH Touch Assistive Menu This touch-exclusive feature allows the user to configure settings without a remote control.Touching the screen for a certain period of time or pressing the Touch Assistive Menu local key brings up the Touch Assistive Menu on the screen.Different features are su...

ENGLISH 61 TO CONTROL AN EXTERNAL PC USING TOUCH SCREEN • This only applies to certain models. Connecting to a PC Connecting this product to a PC with a USB cable (Type A to Type B) allows you to control the connected PC by touching the screen of the product.For a PC that supports USB-C, use a USB-C...

ENGLISH 62 SMART CALIBRATION How to Run [Smart Calibration] 1 Set the Set ID of each set. 2 Select the [Picture Mode] to execute Smart Calibration. When you set [Picture mode] to [Calibration] mode, you can set [Color Temperature] among [3000 K / Optimal Target / Original]. - [Optimal Target]: Set t...

ENGLISH 64 IR CODE • All models do not support the HDMI/USB function. • Some key codes may not be supported depending on the model. Code (Hex) Function Remarks 08 (Power) Remote control button C4 MONITOR ON Remote control button C5 MONITOR OFF Remote control button 95 (Energy Saving) Remote control ...

ENGLISH 66 CONTROLLING MULTIPLE PRODUCTS • This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.In the Option menu, the Set ID must be between 1 and 1000 without being duplicated....

ENGLISH 67 Communication Parameter Baud Rate: 9600 BPSData Length: 8 bitsParity Bit: NoneStop Bit: 1 bitFlow Control: NoneCommunication Code: ASCII NOTE • When using 3-wire connections (non-standard), an IR daisy chain cannot be used. • Be sure to only use the provided gender to connect properly. • ...

ENGLISH 68 Command Reference List Command Data (Hexadecimal) 1 2 01 [Power] k a 00 to 02 02 Select Input x b See Select Input 03 [Aspect Ratio] k c See [Aspect Ratio] 04 [Brightness Control] j q 00 to 04 05 [Picture Mode] d x See [Picture Mode] 06 [Contrast] k g 00 to 64 07 [Brightness] k h 00 to 64...

ENGLISH 72 Transmission/Reception Protocol Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) * (Command1): This command is used to identify between the adjustment setting or the user adjustment modes.* (Command2): This command is used to control the monitor.* (Set ID): Used for selecting a s...