Page 2 - TABLE OF CONTENTS
ENGLISH 2 TABLE OF CONTENTS IMPORTANT PRECAUTIONS .........3 -Electrical Power Related Precautions ....................3 -Precautions for installing the Product ..................4 -Precautions for Moving the Product ......................6 -Precautions for Using/Cleaning the Product .....6 -Product...
Page 3 - IMPORTANT PRECAUTIONS; Electrical Power Related Precautions; WARNING
ENGLISH 3 WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. IMPORTANT PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING Failure to follow those warnings may result in de...
Page 4 - Precautions for installing the Product
ENGLISH 4 • Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord. - You may be electrocuted due to excess moisture. • If you don’t intend to use the product for a long time, u...
Page 6 - Precautions for Moving the Product; Precautions for Using/Cleaning the Product
ENGLISH 6 Precautions for Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. • When lifting or moving the product...
Page 8 - LICENSES
ENGLISH 8 LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com . The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and o...
Page 9 - ASSEMBLY AND PREPARATION; CAUTION
ENGLISH 9 ASSEMBLY AND PREPARATION CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. • Connect the power cord to the product before you plug it into a wall outlet. Plug...
Page 10 - Optional Accessories; NOTE
ENGLISH 10 Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. OPS Kit KT-OPSA Screws (Diameter 3.0 mm x...
Page 11 - Parts and Buttons
ENGLISH 11 Parts and Buttons The image may be different according to the model. Buttons • : Changes the input source. • : Accesses the main menus, or saves your input and exits the menus. • : Adjust the up and down. • : Moves left and right. • : Displays the current signal and mode. • : Turns the po...
Page 12 - To Install in a Portrait Layout
ENGLISH 12 To Install in a Portrait Layout When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen). Remove brackets before Installation Make sure that the protection pads are removed from each corner before installing the product. NOTE • Keep the remove...
Page 13 - Storage Method for Panel; Correct Method
ENGLISH 13 Storage Method for Panel Protection Correct Method Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel to touch the floor. Cushion Panel When laying down the product, lay a cushion on a flat floor. Put the pro...
Page 14 - Installing on a Wall
ENGLISH 14 Installing on a Wall To install the Monitor on a wall (optional), use the VESA screws provided as accessories to fasten it. Install the monitor at least 200 mm (7.8 inches) away from the wall and leave about 100 mm (3.9 inches) of space at each side of the monitor to ensure sufficient ven...
Page 15 - IR Receiver; How to Mount the Set
ENGLISH 15 IR Receiver This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. Tiling Displays How to Mount the Set Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall ...
Page 16 - How to Join Sets
ENGLISH 16 How to Join Sets • Lay the protective sheet on top before installing additional sets. 1 Join other sets using screws for fixing the VESA wall mount in the same way as above. Set 4 joined to the rest of the sets (2 x 2 tiling) 2 Adjust the spacing between the sets using the tiling guide, a...
Page 18 - REMOTE CONTROL
ENGLISH 18 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartm...
Page 20 - MAKING CONNECTIONS; Connecting to a PC; External Device Connection
ENGLISH 20 MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cabl...
Page 21 - Using the Input List
ENGLISH 21 NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a HDMI cable. • If you turn the monitor on when the set is cold, the screen may flicker. ...
Page 22 - Connecting Multiple Monitors
ENGLISH 22 Connecting Multiple Monitors To use multiple monitors connected to each other, connect the end of the signal input cable (DP cable) to the DP OUT connection in one monitor and connect the other end to the DP IN connection of the other monitor. DVI-D IN DP DVI-D HDMI 1 HDMI 2 RS-232C LAN M...
Page 24 - TROUBLESHOOTING
ENGLISH 24 TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the “Invalid Format” message appear? • The signal from the PC (Graphics card) is out of the vertical or horizontal frequenc...
Page 27 - PRODUCT SPECIFICATIONS
ENGLISH 27 PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions.“ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT)Liquid Crystal Display (LCD) Scre...
