LG 55LV77D-B - User Manual

ENGLISH 6 Precautions for Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. • When lifting or moving the product...

ENGLISH 7 Precautions for Using/Cleaning the Product WARNING • Do not attempt to disassemble, repair or modify the product yourself. - Fire or electric shock can occur. - Contact LG Customer Service for repair. • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to ...

ENGLISH 8 LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com . The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and o...

ENGLISH 9 ASSEMBLY AND PREPARATION CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. NOTE • The accessories provided with your product may vary depending on the model o...

ENGLISH 10 Parts and Buttons The image may be different according to the model.

ENGLISH 11 Portrait Layout When installing in a portrait layout, rotate the monitor clockwise 90 degrees (when facing the screen). Remove L-brackets before Installation Remove the L-brackets from each corner of the monitor before installing it. NOTE • Keep the removed L-brackets and use them when mo...

ENGLISH 12 Storage Method for Panel Protection Correct Method 1 If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel to touch the floor. Panel 2 When laying down the product, lay a cushion on a flat floor. Put the product on it...

ENGLISH 14 Installing on a Wall To install the Monitor on a wall (optional), use the VESA screws provided as accessories to fasten it.Install the monitor at least 200 mm (7.8 inches) away from the wall and leave about 100 mm (3.9 inches) of space at each side of the monitor to ensure sufficient vent...

ENGLISH 15 External equipment setup IR RECEIVER This allows a remote control sensor to be placed in a custom location. The display can then control other displays via an RS232C cable. Tiling Displays How to Mount the Set Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mou...

ENGLISH 17 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartm...

ENGLISH 19 MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cabl...

ENGLISH 21 Daisy Chain Monitors To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product. Monitor 1 Monitor 2 Monitor 3 Monitor 4 NOTE • If the si...

ENGLISH 22 TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Power is on, but the screen appears extremely dark. • Adjust brightness and contrast again. • Backlight may need repair. Does th...

ENGLISH 25 PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions.“ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type 139 cm (54.7 inches) Wide TFT (Thin Film Transistor)LCD (Li...

USER GUIDE LG Digital Signage (MONITOR SIGNAGE) www.lg.com Please read this manual carefully before operating your set and retain it for future reference. L15

ENGLISH 2 TABLE OF CONTENTS USING THE MONITOR ...................3 -Using the Input List .........................................................3 -Adjusting Aspect Ratio ..................................................3 ENTERTAINMENT .........................5 -Using the Network ...................

ENGLISH 3 USING THE MONITOR Using the Input List 1 Press to access the Input List. 2 Press the navigation buttons to scroll to one of the input mode and press . - RGB-PC - HDMI - HDMI2 - DVI-D - USB - Display Port - OPS NOTE • Some input signals may not be supported depending on the model. Adjusting...

ENGLISH 5 ENTERTAINMENT Using the Network Connecting to a Network For wired network connections, connect the display to a local area network (LAN) via the LAN port as shown on the following diagram. Then, set up the network settings. For wireless network connections, connect the Wi-Fi USB module to ...

ENGLISH 8 Network Status 1 Press to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press . 3 Press the navigation buttons to select Network Status . 4 Press to check the network status. 5 When you are finished, press . Option Description Setting Return to the network ...

ENGLISH 9 Using the My Media Connecting USB storage devices Connect USB storage devices such as a USB flash memory, external hard drive to the display and use multimedia features.Connect a USB flash memory or USB memory card reader to the Display as shown on the following illustration. The My Media ...

ENGLISH 11 Browsing Files Browse files saved in a USB storage device. 1 Press to access the main menu. 2 Press the search button to scroll to and press . 3 Press the Search button to go to the Movie List , Photo List , Music List , or Content List that you want, and press . Supported file format Typ...

ENGLISH 13 Content (when using SuperSign software) File Extensions : *.cts/ *.sceMovie File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.trp/*.tp/*.mp4/*.mkv/*.avi/*. avi(motion JPEG)/*. mp4(motion JPEG)/*.mkv(motion JPEG)Video format: MPEG1, MPEG2, MPEG4,H.264, DivX 3.11, DivX 4, DivX 5, DivX 6, Xvid 1.00...

ENGLISH 16 Viewing Photos View image files saved in the USB storage device. 1 Press to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press . 3 Press the navigation button to scroll to Photo List and press . 4 Press the navigation buttons to scroll to a folder you want...

ENGLISH 18 Listening to Music Plays music files saved in the USB storage device. 1 Press to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press . 3 Press the navigation button to scroll to Music List and press . 4 Press the navigation buttons to scroll to a folder you...

ENGLISH 20 Viewing the Contents List You can play the files saved using the Export function to an external file in the SuperSign Software. 1 Press to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press . 3 Press the navigation button to scroll to Contents List and pre...

ENGLISH 23 CUSTOMIZING SETTINGS Accessing Main Menus 1 Press to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press . 3 Press the navigation buttons to scroll to the setting or option you want and press . 4 When you are finished, press . When you r...

ENGLISH 24 PICTURE Settings 1 Press to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press . 3 Press the navigation buttons to scroll to the setting or option you want and press . - To return to the previous level, press . 4 When you are finished, press . When you re...

ENGLISH 28 AUDIO Settings 1 Press to access the main menus. 2 Press the navigation buttons to scroll to and press . 3 Press the navigation buttons to scroll to the setting or option you want and press . - To return to the previous level, press . 4 When you are finished, press . When you return to th...

ENGLISH 29 TIME Settings 1 Press to access the main menus. 2 Press the navigation buttons to scroll to TIME and press . 3 Press the navigation buttons to scroll to the setting or option you want and press . - To return to the previous level, press . 4 When you are finished, press . When you return t...

ENGLISH 30 OPTION Settings 1 Press to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press . 3 Press the navigation buttons to scroll to the setting or option you want and press . - To return to the previous level, press . 4 When you are finished, press . When you retu...

ENGLISH 33 NETWORK Settings 1 Press to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press . 3 Press the navigation buttons to scroll to the setting or option you want and press . - To return to the previous level, press . 4 When you are finished, press . When you re...

ENGLISH 34 PICTURE ID Settings • Only applies to certain models. is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified...

ENGLISH 35 IR CODES • All models do not support the HDMI/USB function. • Some key codes are not supported depending on the model. Code (Hex) Function Note 08 (Power) R/C BUTTON 0B R/C BUTTON C4 MONITOR ON R/C BUTTON C5 MONITOR OFF R/C BUTTON 95 ( ) R/C BUTTON DC R/C BUTTON 10 to 19 Number Key 0 to 9...

ENGLISH 36 Code (Hex) Function Note 8F R/C BUTTON 8E R/C BUTTON 72 Red Key ( ) R/C BUTTON 71 Green Key ( ) R/C BUTTON 63 Yellow Key R/C BUTTON 61 Blue Key R/C BUTTON TO CONTROL MULTIPLE PRODUCTS • Use this method to connect several products to a single PC. You can control several products at a time ...

ENGLISH 37 RS-232C Configurations 4P Cable • 4-Wire Configurations (Standard RS-232C cable) RXD TXD GND IR TXD RXD GND IR NOTE • When using three-wire connections (non-standard), an IR daisy chain cannot be used. • If you want to control multiple units simultaneously, use 3.5 mm 4-pole cables (sold ...

ENGLISH 38 Command Reference List COMMAND DATA (Hexadecimal) 1 2 01 Power k a 00 to 01 02 Select input x b See [Select input] 03 Aspect ratio k c See [Aspect ratio] 04 Energy saving j q See [Energy saving] 05 Picture mode d x See [Picture mode] 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64 08 ...

ENGLISH 40 Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1] Identifies the factory setting and the user setting modes. * [Command2] Controls monitors. * [Set ID] Used for selecting a set you want to control. A Set ID can be assigned to each set...

INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) www.lg.com Please read this manual carefully before operating your set and retain it for future reference. L15

ENGLISH 2 TABLE OF CONTENTS ACCESSING INSTALLATION MENU ........................................................4 INSTALLATION MENU ..................5 -LG Digital Signage Setup menu ................................5 Signage Mode OperationPower On StatusKey OperationIR Operation / Local Key Operatio...

ENGLISH 5 INSTALLATION MENU NOTE • Default values may differ by region. LG Digital Signage Setup menu • Use this menu to configure the Digital Signage after in stallation. LG Digital Signage Setup Signage Mode Operation • Power On Status • Key Operation• IR Operation• Local Key Operation• Limited Mo...

ENGLISH 26 ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. LG Digital Signage SetupUSB CloningPassword ChangeSet ID SetupConfiguration SetupLock ModeExternal Speaker / Audio out...