Page 2 - ENG; ENGLISH; TABLE OF CONTENTS
2 ENG ENGLISH TABLE OF CONTENTS TABLE OF CONTENTS 4 LICENSES 5 ASSEMBLING AND PREPARING 5 Accessories6 Parts7 To Install in a Portrait Layout 7 Remove L-brackets before Installation 8 STORAGE METHOD FOR PANEL PROTECTION 8 - Correct Method 8 - Incorrect Method 9 Installing on a Wall 11 EXTERNAL EQUIP...
Page 3 - - Using the Multi Display Mode function; TROUBLESHOOTING
3 ENG ENGLISH TABLE OF CONTENTS 57 Connecting to the LAN57 Connecting to a USB58 Daisy Chain Monitors59 - Using the Multi Display Mode function 60 TROUBLESHOOTING 62 SPECIFICATIONS 66 IR CODES 67 CONTROLLING THE MULTIPLE PRODUCT 67 Connecting the cable67 RS-232C Configurations67 Communication Parame...
Page 4 - LICENSES; NOTE; . Find your registration code in the
ENGLISH 4 LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. y y Product damage from moving or changing the installation location is not covered by warranty. y y The warranty will not cover any damages caused by using the product in an e...
Page 5 - ASSEMBLING AND PREPARING; Accessories; CAUTION; ) and download the latest software for your
5 ENG ENGLISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accesso...
Page 6 - Parts
Page 7 - To Install in a Portrait Layout
7 ENG ENGLISH ASSEMBLING AND PREPARING To Install in a Portrait Layout When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen). Remove L-brackets before Installation Remove the L-brackets from each corner of the monitor before installing it. y y Keep th...
Page 8 - Correct Method; STORAGE METHOD FOR PANEL PROTECTION
8 ENG ENGLISH ASSEMBLING AND PREPARING Correct Method Incorrect Method STORAGE METHOD FOR PANEL PROTECTION If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel not to touch the floor. When laying down the product, lay a cushion...
Page 9 - the wall, make sure that sufficient ventilation; Installing on a Wall
9 ENG ENGLISH ASSEMBLING AND PREPARING y y Disconnect the power cord first, and then move or install the monitor set. Otherwise electric shock may occur. y y If you install the monitor set on a ceiling or slanted wall, it may fall and result in severe injury. y y Do not over tighten the screws as th...
Page 10 - Securing the product to a wall (optional)
10 ENG ENGLISH ASSEMBLING AND PREPARING Securing the product to a wall (optional) (Depending on model) 1 Insert and tighten the eye-bolts, or p roduct brackets and bolts on the back of the product.- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brack...
Page 11 - EXTERNAL EQUIPMENT SETUP; IR RECEIVER
11 ENG ENGLISH ASSEMBLING AND PREPARING EXTERNAL EQUIPMENT SETUP IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable.
Page 12 - How to Mount the Set; Tiling Displays; Example of 2 x 2 Tiling
12 ENG ENGLISH ASSEMBLING AND PREPARING How to Mount the Set Tiling Displays Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall. Screws (15-M4) ≤ 6 mm (0.2 inches) Screws for attaching the VESA wall mount (M6) 600 400
Page 13 - How to Join Sets; Now the 2 x 2 tiling is complete.
13 ENG ENGLISH ASSEMBLING AND PREPARING Set 4 joined to the rest of the sets(2 x 2 tiling) How to Join Sets y y The load applied to each set should be supported by the wall mount plate or the wall using a VESA wall mount (600 x 400). y y The load applied to each set should be supported by the wall m...
Page 14 - REMOTE CONTROL; CLEAR
14 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly.To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label ...
Page 15 - Enters the White Balance
15 ENG ENGLISH REMOTE CONTROL W.BAL Enters the White Balance menu. Navigation Buttons Scrolls through menus or options. S.MENU (SuperSign Menu Key) This button does not apply to this model. EXIT Clears all on-screen displays and returns to Monitor set viewing from any menu. TILE Selects the TILE Mod...
Page 16 - Displaying the Device Name Connected to an Input Port; Display which devices are connected to which
16 ENG ENGLISH REMOTE CONTROL Displaying the Device Name Connected to an Input Port Display which devices are connected to which external input ports. 1 Access the Input list screen and press the blue (input label) button on the remote control. 2 You can assign an input label for every input except ...
Page 17 - USING THE MONITOR SET; Connecting to a PC; RGB Connection
17 ENG ENGLISH USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC Your Monitor set supports the Plug & Play* feature. * Plug & Play: A PC will have a built-in driver for the monitor, no extra software is needed. y y Connect the signal input cable and tighten it by turning the scr...
Page 18 - DVI Connection; Use a High Speed HDMI; PC
18 ENG ENGLISH USING THE MONITOR SET DVI Connection Transmits digital video signal from your PC to the monitor set. Connect the PC and the monitor set with the DVI cable as shown the following illustrations.Select DVI input. HDMI Connection Transmits digital video and audio signals from your PC to t...
Page 19 - IR Receiver Connection; Allows the use of IR receiver extension.; Display Port Connection
19 ENG ENGLISH USING THE MONITOR SET IR Receiver Connection Allows the use of IR receiver extension. Display Port Connection Transmits digital video and audio signals from your PC to the Monitor. Connect the PC and the Monitor with the Display Port cable as shown in the following illustrations.Selec...
Page 20 - Adjusting the Screen; Selecting an Image Mode
20 ENG ENGLISH USING THE MONITOR SET Adjusting the Screen Selecting an Image Mode Display images in its optimized settings by selecting one of the preset image modes. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK . 3 Press the navigation ...
Page 21 - Customizing PC Display Options
21 ENG ENGLISH USING THE MONITOR SET Customizing PC Display Options Customize options of each image mode for thebest image quality. y y This function works in the following mode: RGB [PC] mode. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press O...
Page 22 - Using Additional Options; Adjusting Aspect Ratio; Resize the image to view the image at its optimal size by pressing; ARC; while you are watching Monitor set.
22 ENG ENGLISH USING THE MONITOR SET Using Additional Options Adjusting Aspect Ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching Monitor set. y y If a fixed image displays on the screen for a long period of time, it could be imprinted and become a pe...
Page 23 - Zoom; Just Scan
23 ENG ENGLISH USING THE MONITOR SET - 4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. - Zoom : This selection will allow you to view the picture without any alteration, while filling the entire...
Page 24 - Using the Input List; Selecting an Input Source; Press; INPUT; to access the input source list.; OK
24 ENG ENGLISH USING THE MONITOR SET Using the Input List Selecting an Input Source 1 Press INPUT to access the input source list. 2 Press the navigation buttons to scroll to one of the input sources and press OK . Input source Description AV Watch video from a VCR or other external devices. Compone...
Page 25 - ENTERTAINMENT; Connecting to a Wired Network; SETTINGS; Internet
25 ENG ENGLISH ENTERTAINMENT ENTERTAINMENT Connecting to a Wired Network Connect the display to a local area network (LAN) via the LAN port as shown on the following illustra-tion and set up the network settings.Only supports wired network connection.After making a physical connection, a small numbe...
Page 26 - Tips for Network Setting; Network Status; Network Setting
26 ENG ENGLISH ENTERTAINMENT Tips for Network Setting y y Use a standard LAN cable with this display. Cat5 or better with a RJ45 connector. y y Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the network, quickly po...
Page 27 - Tips for Using USB Storage Devices; Only a USB storage device is recognizable.; Connecting USB Storage Devices; or
27 ENG ENGLISH ENTERTAINMENT Tips for Using USB Storage Devices y y Only a USB storage device is recognizable. y y If the USB storage device is connected through a USB hub, the device is not recog-nizable. y y A USB storage device using an automatic recognition programme may not be recog-nized. y y ...
Page 28 - Browsing Files; main menus; My
28 ENG ENGLISH ENTERTAINMENT y y Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be responsible for any data loss. y y If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external...
Page 29 - Supported File Format
29 ENG ENGLISH ENTERTAINMENT Supported File Format Type Supported file format Movie DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T RP,TP,ASF,WMV,FLV)Movie (*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/ *.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.avi(motion-jpeg)/*. mp4(motion-jpeg)/*.mkv(motion-jpeg))supp...
Page 30 - Viewing Movies
30 ENG ENGLISH ENTERTAINMENT Viewing Movies Play video files on display. Your display shows all of the video files saved in a USB storage device or shared folder on a PC. 1 Press the navigation buttons to scroll to My Media and press OK . 2 Press the navigation buttons to scroll to Movie List and pr...
Page 32 - When you select the; Language; For more details about the; CUSTOMIZE SETTINGS
32 ENG ENGLISH ENTERTAINMENT Code Page Support Language Latin1 English, Spanish, French, German, Italian, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan,Valencian Latin2 Bosnian, Polish, Croatian, Czech,Slovak, Slovenian, Serbian, Hungarian Latin4 Estonian, Latvian,...
Page 33 - Viewing Photos
33 ENG ENGLISH ENTERTAINMENT Viewing Photos View image files saved in a USB storage device. The displays on the screen may differ from the model. 1 Press the navigation buttons to scroll to My Media and press OK . 2 Press the navigation buttons to scroll to Photo List and press OK . 3 Press the navi...
Page 34 - Photo options
34 ENG ENGLISH ENTERTAINMENT Option Description ENERGY SAVING Reduces power consumption by adjust-ing peak screen brightness. y Slide Speed : Selects a slideshow speed ( Fast , Medium , Slow ). y TransitionEffect: Set the view mode of the slideshow. y BGM : Selects a music folder for the background ...
Page 35 - Set Photo View; Press the navigation buttons to scroll to select; Slide Speed,Transition Effect; Transition Effect Option
35 ENG ENGLISH ENTERTAINMENT When you select the Set Photo View , 1 Press the navigation buttons to scroll to select Slide Speed,Transition Effect or BGM. 2 Press the navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding The current photo d...
Page 36 - Listening to Music
36 ENG ENGLISH ENTERTAINMENT 5 Play music. Listening to Music 1 Press the navigation buttons to scroll to My Me- dia and press OK . 2 Press the navigation buttons to scroll to Music List and press OK . 3 Press the navigation buttons to scroll to a folder you want and press OK . 4 Press the navigatio...
Page 38 - Viewing the Contents List
38 ENG ENGLISH ENTERTAINMENT y y While playing media files from Contents List, only the BACK, EXIT or Volume button are available. Selecting the BACK or EXIT button stops playing media files and returns to the screen view mode. y y If there is the AutoPlay folder in the USB device and its files are ...
Page 39 - DivX
39 ENG ENGLISH ENTERTAINMENT DivX ® VOD Guide DivX ® VOD Registration In order to play purchased or rented DivX ® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. 1 Press SETTINGS to access the main menus. 2 Press the navigation...
Page 40 - PIP; PBP; and then
40 ENG ENGLISH ENTERTAINMENT Using PIP/PBP Displays videos or photos stored on a USB device on a single monitor by dividing it into the main and sub screens. 1 Press the SETTINGS button to move to OPTION and press OK . 2 Press PIP/PBP to select PIP or PBP and then press OK . 3 Select Movie List or P...
Page 41 - CUSTOMIZING SETTINGS; Accessing the Main Menus
41 ENG ENGLISH CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing the Main Menus 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK ....
Page 42 - PICTURE Settings
42 ENG ENGLISH CUSTOMIZING SETTINGS PICTURE Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK ....
Page 43 - Basic Image Options; Picture Mode; ' setting in the Picture menu is set to; Game; the subsequent menus will be automatically set.; Sharpness; and; Tint
43 ENG ENGLISH CUSTOMIZING SETTINGS Basic Image Options Setting Description Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contra...
Page 44 - Advanced Control
44 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Dynamic Contrast (Off/High/ Medium/Low) Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. (Function works in the following...
Page 45 - AUDIO Settings
45 ENG ENGLISH CUSTOMIZING SETTINGS AUDIO Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to AUDIO and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4 W...
Page 46 - TIME Settings
46 ENG ENGLISH CUSTOMIZING SETTINGS TIME Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to TIME and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4 Whe...
Page 47 - OPTION Settings
47 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Language To choose the language in which the control names are displayed. ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a ghost image remaining even when you change the i...
Page 50 - Tile Mode
50 ENG ENGLISH CUSTOMIZING SETTINGS Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. Tile Mode - Natural mode When active, the part of the image that would normally be displayed in the gap between the monitors is omitted. ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID ...
Page 52 - Close
52 ENG ENGLISH CUSTOMIZING SETTINGS Picture ID Picture ID is used to change the settings of a specific display using a single IR receiver for multi-vision. The set receiving the IR signal communicates with another set via an RS-232C connection. Each set is identified by a Set ID. If you assign the P...
Page 53 - NETWORK Settings
53 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Player Name Setting Sets the player name used in SuperSign Manager.(Up to 20 characters) Network Setting Configure the network settings. Network Status Display the network status. - Internet is connected : Extermally connected - Network is conn...
Page 54 - MAKING CONNECTIONS; Check the connection type of the external device.
54 ENG ENGLISH MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the ports on the monitor set’s back panel. 1 Find an external device you want to connect to your monitor set shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the a...
Page 55 - External Device Connection; HDMI Connection
55 ENG ENGLISH MAKING CONNECTIONS External Device Connection Connect a HD receiver, DVD, or VCR player to the monitor set and select an appropriate input mode. HDMI Connection Transmits the digital video and audio signals from an external device to the monitor set. Connect the external device and th...
Page 56 - Component Connection; External device; External device
56 ENG ENGLISH MAKING CONNECTIONS VIDEO OUT AUDIO IN (not included) (not included) Component Connection Transmits the analog video and audio signals from an external device to the monitor set. Connect the external device and the monitor set with the RGB-Component cable as shown in the following illu...
Page 57 - Connecting to the LAN; Connecting to a USB; Audio Connection
57 ENG ENGLISH MAKING CONNECTIONS Connecting to the LAN A Using a router (Switch) Monitor Set Network PC LAN Switch Monitor Set Network PC LAN B Using the Internet. Connecting to a USB Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player, or a USB memory card read...
Page 58 - Daisy Chain Monitors
58 ENG ENGLISH MAKING CONNECTIONS y y If the signal is stable and there is no cable loss, in general, up to 100 monitors can be connected via the DP Out port (at the recommended resolution). If you want to connect more than this number of monitors, it is recommended to use a distributor. y y If you ...
Page 59 - Using the Multi Display Mode function; The; Multi Display Mode; - This function can be configured in the; Installation Menu; , the image of each display is displayed in single mode.
59 ENG ENGLISH TROUBLESHOOTING Using the Multi Display Mode function The Multi Display Mode function displays a video signal received from DP In either in single mode (SST: Single Stream Transport) or multi-mode (MST: Multi Stream Transport) through DP Out. - This function can be configured in the I...
Page 60 - No image is displayed.
60 ENG ENGLISH TROUBLESHOOTING TROUBLESHOOTING No image is displayed. Problem Resolution Is the product power cord connected? y See if the power cord is properly connected to the outlet. Power is on, but the screen appears extremely dark. y Adjust brightness and contrast again. y Backlight may need ...
Page 61 - The audio function does not work.; See if the audio cable is connected properly.; Screen color is abnormal.; The power suddenly turned off.
61 ENG ENGLISH TROUBLESHOOTING After-image appears on the product. Problem Resolution After-image appears when the product is turned off. y If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. The audio function does not work. Problem Resolution...
Page 62 - SPECIFICATIONS
62 ENG ENGLISH SPECIFICATIONS SPECIFICATIONS LCD Panel Screen Type 138.7 cm TFT (Thin Film Transistor)LCD (Liquid Crystal Display) Panel.Visible diagonal size: 138.7 cm55" class (54.6" / 138.7 cm diagonal) Pixel Pitch 0.630 mm (H) x 0.630 mm (V) Video Signal Max. Resolution 1920 x 1080 @ 60 ...
Page 63 - Dimensions
63 ENG ENGLISH SPECIFICATIONS 88.5 (3.4) 684.2 (26.9) 1213.4 (47.7) Dimensions The illustrations in this manual may differ from the actual product and accessories.Please see the Mounting on a Wall section for sizes of screws. ( See p.9 ) Product specifications shown above may be changed without prio...
Page 64 - Component supported mode
64 ENG ENGLISH SPECIFICATIONS RGB (PC) supported mode Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 640 x 480 31.469 59.94 640 x 480 37.5 75 720 x 400 31.468 70.8 800 x 600 37.879 60.317 800 x 600 46.875 75 832 x 624 49.725 74.55 1024 x 768 48.363 60 1024 x 768 60.123 75.029 1280 x 720...
Page 66 - IR CODES; All models do not support the HDMI/USB function.
66 ENG ENGLISH IR CODES IR CODES y y All models do not support the HDMI/USB function. y y Some key codes are not supported depending on the model. Code (Hexa) Function Note 08 (Power) R/C BUTTON 0B INPUT R/C BUTTON C4 MONITOR ON R/C BUTTON C5 MONITOR OFF R/C BUTTON 95 ENERGY SAVING R/C BUTTON DC 3D ...
Page 67 - CONTROLLING THE MULTIPLE PRODUCT; Connecting the cable; Connect the RS-232C cable as shown in the picture.; Communication Parameter; Communication Code : ASCII code; RS-232C Configurations
67 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT y y Use this method to connect several products to a single PC. You can control several products at one time by connecting them to a single PC. y y In the Option menu, Set ID must be between 1 and 255 (1 - 1,000 in cert...
Page 68 - Command Reference List
68 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT Command Reference List COMMAND DATA (Hexadecimal) 1 2 01. Power k a 00 to 01 02. Input Select x b Refer to ‘Input Select'. 03. Aspect Ratio k c Refer to ‘Aspect Ratio'. 04. Energy Saving j q Refer to ‘Energy Saving'. 05. Picture mode d x Refer to ‘Pict...
Page 69 - Some commands are not supported depending on the model.
69 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT COMMAND DATA (Hexadecimal) 1 2 39. Tile Mode d d 00 to 01 40. Tile Mode Check d z FF 41. Tile ID d i Refer to ‘Tile ID'. 42. Tile H Position d e 00 to 32 43. Tile V Position d f 00 to 32 44. Tile H Size d g 00 to 32 45. Tile V Size d h 00 to 32 46. Nat...
Page 70 - Transmission / Receiving Protocol; Transmission; * Some commands may not be supported on some models.
70 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1] Identifies the factory setting and the user setting modes.* [Command2] Controls monitors.* [Set ID] Used for selecting a set you want to control. A...
