Page 2 - WARNING
WARNING : This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
Page 3 - Table of Contents
2 Table of Contents Licenses 3 Accessories 4 Separate Purchase ............................................................................................................. 4 To Install in Portrait Orientation 5 Using the Remote Control 6 Name and Function of the Parts 8 Rear View .....................
Page 4 - Licenses
3 Licenses The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation....
Page 5 - Accessories; Remote Control
4 Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. ❖ Optional accessories (purchased separately) may vary depending on the model. ❖ Note that optional accessories may look different from those shown here. ❖ ...
Page 6 - To Install in Portrait Orientation; Note
5 To Install in Portrait Orientation "To install in a portrait orientation, rotate the screen 90 degrees clockwise." - Only on some models. • When using the wall mounting bracket or the portrait scene mode, the opening can be covered by the stand hole cover. Note
Page 7 - Using the Remote Control; Name of the Remote Control Buttons
6 P A G E INPUT ENERGY SAVING MARK ARC ON OFF . , ! ABC DEF GHI JKL MNO PQRS TUV 1/a/A - * # WXYZ CLEAR OK S.MENU MONITOR PSM AUTO MUTE BRIGHT NESS MENU ID BACK TILE ON OFF EXIT POWER 1 2 5 4 7 6 9 8 13 12 11 10 3 Using the Remote Control Name of the Remote Control Buttons 1 2 5 3 4 7 6 9 8 13 12 11...
Page 8 - Inserting batteries into remote control
7 P A G E INPUT ENERGY SAVING MARK ARC ON OFF . , ! ABC DEF GHI JKL MNO PQRS TUV 1/a/A - * # WXYZ CLEAR OK S.MENU MONITOR PSM AUTO MUTE BRIGHT NESS MENU ID BACK TILE ON OFF EXIT POWER 14 15 18 16 19 17 20 2122 Energy Saving Button - Adjust the Energy Saving mode of the SET. INPUT Select Button If yo...
Page 9 - Name and Function of the Parts; Rear View; Power Connector; Connect the power cord; PC Sound Jack; Connect an audio cable to the *LINE OUT jack of the PC sound card.
8 Name and Function of the Parts Rear View * LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume...
Page 10 - the signal input cable.; Connecting to External Devices; Connect the Audio cable.; When Connecting to your PC; Connect the USB cable.
9 First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. When connecting with the D-Sub signal input cable.When connecting with the HDMI-DVI signal input cable (not included). * When HDMI PC is used, a compatiblity problem might occur. MA...
Page 11 - INPUT →; INPUT →◄ ► → AUTO/SET; RGB
10 Select an input signal. Press the INPUT button on the remote control to select the input signal. Or, press INPUT on the bottom of the set. • How to connect to two computers. Connect the signal cables ( HDMI-DVI and D-Sub) to each computer. Press the INPUT button on the remote control to select th...
Page 12 - Connect the LAN cable as shown in the below figure .; When Using the LAN
11 • Using LAN establishes communication between your PC and the monitor and enables to use the OSD menus on the PC as well as on the monitor. Connecting to External Devices Connect the LAN cable as shown in the below figure . Connect the LAN cable and install the eZ-Net Manager program on the CD-RO...
Page 13 - Daisy Chain Monitors; When using RGB input
12 Connecting to External Devices Daisy Chain Monitors When using RGB input When using AV input To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connec...
Page 14 - Kensington Security Slot; VESA FDMI Wall Mounting
13 Kensington Security Slot The Set is equipped with a kensington Security System connector on the back panel. The cable and lock are available separate and are not sold by LG. For more info, visit http://www.kensington. com, the internet home page of the Kensington company. This product supports a ...
Page 15 - INPUT; Video Input
14 Connecting to External Devices When connecting with an BNC cable. • Select AV . Connect the video cable as shown in the below figure and then connect the power cord. When connecting with a BNC cable. • Connect the input terminal with a proper color match. BNC Cable(not included) Product VCR/DVD R...
Page 18 - User Menus; Screen Adjustment Options; ◄ ► Adjust the volume.; MENU Button
17 User Menus Screen Adjustment Options Press this button to turn on the power. Press this button again to turn it off. This Indicator lights up red when the display operates normally (on mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. On/Off Button ◄ ►...
Page 19 - This is where the unit receives signals from the remote control.; IR Receiver; Component; INPUT Button
18 User Menus Screen Adjustment Options This is where the unit receives signals from the remote control. IR Receiver 7 AV Composite Video Component HDTV, DVD RGB 15-pin D-Sub analog signal HDMI/DVI Digital signal SuperSign SuperSign - Toggles between inputs INPUT Button 6 INPUT →◄ ► → AUTO/SET Input...
Page 20 - OSD Menu
19 OSD Menu OSD(On Screen Disp lay) • The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. User Menus Note Icon Function Description Adjusts the audio options. Adjusts screen brightness, contrast and color that you prefer. Adjusts the screen...
Page 21 - How to Adjust the OSD (On Screen Display) Screen; Use the remote control to adjust the OSD screen.; How to Adjust the Screen Automatically; [When XGA mode is active and
20 User Menus How to Adjust the OSD (On Screen Display) Screen • Use the remote control to adjust the OSD screen. How to Adjust the Screen Automatically When using an analog PC signal, press the AUTO/SET button (AUTO button on a remote Control). Then optimal screen settings will be selected that fit...
Page 22 - Adjusting Screen Color; Aspect Ratio; To select the image size of the screen.; PICTURE
21 User Menus Adjusting Screen Color Aspect Ratio To select the image size of the screen. 16:9: Widescreen mode. Just Scan: Displays the full signal data without cropping any of the image. (*This menu is activated only in 720p,1080p,1080i (HDMI/DVI-DTV, Component mode) Original: The aspect ratio is ...
Page 23 - Picture Mode; Energy Saving; The screen brightness adjusting menu helps you save energy.
22 User Menus Adjusting Screen Color • If the ' Picture Mode ' is set to ' Cinema ', the ' Energy saving ' mode is disabled. Note Energy Saving The screen brightness adjusting menu helps you save energy. Level: 4 screen brightness levels are available. - Off: 100% light - Level 1: 80% light - Level ...
Page 25 - Adjusts the brightness of LCD panel.
24 User Menus Adjusting Screen Color Backlight: Adjusts the brightness of LCD panel. Contrast: Adjusts the difference between light and dark levels. Brightness: Adjusts the brightness of the screen. Sharpness: Adjusts the clearness of the screen. (This function can be used only under AV, Component a...
Page 26 - Advanced Control; Gamma
25 User Menus Adjusting Screen Color Advanced Control Color Temperature: Color Settings Cool: Slightly purple temperature. Medium: Slightly blue temperature. Warm: Slightly red temperature. Dynamic Contrast: Optimizes the contrast automatically according to the brightness of the reflection. (This fu...
Page 27 - Picture Reset; Adjusts the screen video.
26 User Menus Adjusting Screen Color Returns Picture Mode to the default factory settings. Picture Reset Screen Adjusts the screen video. Resolution: Displays a normal picture and matches the resolution of RGB mode and PC mode. This function works in the following mode: RGB[PC] mode. Auto Config. (R...
Page 28 - Adjusting the Audio Function; AUDIO; AUDIO
27 Adjusting the Audio Function User Menus Auto Volume Automatically adjusts uneven sound volumes across all channels or signals to the most appropriate level. To use this feature, select On. Clear Voice II By differentiating the human sound range from others, Clear Voice II improves voice quality. ...
Page 29 - Adjusting the Timer Function
28 Adjusting the Timer Function User Menus • Once the on or off time is set, these functions operate daily at the preset time. • The scheduled power-off function works properly only when the device time is set correctly. When the scheduled power-on and power-off times are the same, the pow- er-off t...
Page 30 - Selecting the Options; OPTION
29 User Menus Selecting the Options Language Chooses the language in which the control names are displayed. Input Label Selects a label for each input source. For example, when connecting to PC in RGB mode,* Select "PC" for the connecting device field. Otherwise, the screen may not display p...
Page 32 - Adjusts the USB Options.; When connecting the USB device; Select; or; MOVIE LIST; Connect the USB device to the; USB; jack on the product.
31 User Menus Adjusts the USB Options. When connecting the USB device When you connect a USB device, this popup menu is displayed, automatically.“POPUP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated.When the Popup menu appears, you can select Music List, ...
Page 33 - Precautions when using the USB device
32 User Menus Adjusts the USB Options. Precautions when using the USB device • Only a USB storage device is recognizable. • If the USB storage device is connected through a USB hub, the device is not recognizable. • A USB storage device using an automatic recognition program may not be recognized. •...
Page 34 - Photo List; Screen Components
33 User Menus Adjusts the USB Options. You can view photo files on USB storage device.The On Screen Display may be different from your product. Images are an example to assist with the product operation. PHOTO(*.JPEG) supporting fileBaseline: 15360 x 8640Progressive : 1024 x 768 • You can play JPEG ...
Page 35 - View; Deselect all marked photos.; Delete
34 Photo List Page 2/3 Drive1 JMJ001 1366x768, 125KB Up Folder Up FolderKY101 02/12/2010KY102 02/12/2010 JMJ001 02/12/2010 JMJ002 02/12/2010JMJ003 02/12/2010JMJ004 02/12/2010 KY103 02/12/2010KY104 02/12/2010KY105 02/12/2010JMJ005 02/12/2010JMJ006 02/12/2010JMJ007 02/12/2010JMJ008 02/12/2010 No Marke...
Page 36 - How to view photo; button to move to
35 User Menus Adjusts the USB Options. ◄ 1/17 ► Slideshow ◘ BGM ◘ Delete Option Hide ꘤ ► Slideshow When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show. • Set the time interval of the sl...
Page 37 - Music List
36 User Menus You can play music files on USB storage device.Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your product...
Page 38 - As shown, up to 6 music titles are listed per page.; : Play the selected music
37 Music Selection and PopUp Menu ➩ As shown, up to 6 music titles are listed per page. User Menus Adjusts the USB Options. Music List Page 2/3 Music S003 00:00/01:34 Up Folder Title Duration Up FolderS001S002 S003 S004S005 Up Folder 03:3304:4501:3002:3701:58 No Marked Music List Page 2/3 Music S003...
Page 39 - ‘Screen Saver’
38 Music S003 0:27 / 3:67 ■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’ ? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended ...
Page 40 - Movie List
39 The movie list is activated once USB is detected. It is used when playing movie files on monitor.Displays the movies in the USB folder and supports Play.Allows playback of all movies in the folder and user desired files.Video editing is not supported but files can be deleted.It is a movie list th...
Page 42 - Movie Selection and PopUp Menu; executed while screen changes
41 Movie Selection and PopUp Menu ➩ User Menus Adjusts the USB Options. Page 2/3 Movie M002 640x480, 720KB Up Folder Title Duration Up FolderFavorite MusicM001 M002 M001M001 01:34:15 01:35:3001:30:20 No Marked Page 2/3 Movie M002 640x480, 720KB Up Folder Title Duration Up FolderFavorite MusicM001 M0...
Page 43 - : Allows to select the language you want for the file with multiple
42 User Menus Adjusts the USB Options. When you select the Set Video Play, Option 1/6 1/6 Off +0.5 Latin 1 15 ◀ Full Screen ▶ Picture SizeSubtitle Language Audio Language Subtitle File ● Language ● Sync ● Position OK Picture Size : Sets to [ Full Screen ] or [ Original Size ]. Subtitle Language : Al...
Page 44 - DivX Registration Code
43 User Menus Adjusts the USB Options. • Supported movie file Resolution : under 25 frames/sec(720x576 WxH pixels). Frame rate : under 30 frames/sec(720x480) • Video Codec : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3), DivX 3.11, DivX4, DivX5. DivX6. • When loading, some buttons may ...
Page 46 - Cautions When Using the Touch Screen
45 Cautions When Using the Touch Screen • The monitor is optimized for indoor use.• The touch screen monitor is optimized for Windows 7.• Do not remove the USB cable when using the touch screen monitor.• Use LG TDS(Touch Display Settings) provided with the monitor to set touch coordinates when rotat...
Page 47 - To Use the Touch Screen on Windows 7; Plug a USB cable into a USB port on the back of the monitor.; Gestures and Settings on Windows 7
46 To Use the Touch Screen on Windows 7 * The monitor can respond to as many as five touch-points at any one time when connected to a Windows 7 computer. Then, connect the USB cable to your PC so that it automatically recognizes the touch screen monitor. Plug a USB cable into a USB port on the back ...
Page 48 - To Use the Touch Screen on Windows XP
47 Using the Touch Screen (Windows XP) To Use the Touch Screen on Windows XP * The monitor can respond to one touch-point when connected to a Windows XP computer. Plug a USB cable into a USB port on the back of the monitor. Then, connect the USB cable to your PC so that it automatically recognizes t...
Page 49 - Touch Response to Windows XP; Current Display Settings; Screen Rotation; Touch Screen Rotation Settings
48 Landscape Portrait Using the Touch Screen (Windows XP) Touch Response to Windows XP Touch: Mouse click (action)Long-press: Mouse right click (context menu)* The touch screen monitor is optimized for Windows 7. How to Use LG TDS LG TDS is required to enable portrait mode and the long-touch on Wind...
Page 50 - Troubleshooting; 'Unknown Product' message appears when the product is connected.; No image is displayed
49 Troubleshooting • Install the product driver, which is provided with the product, or download it from the web site. (http://www.lg.com) • See if the plug&play function is supported by referring to the video card user manual. ● Did you install the driver? 'Unknown Product' message appears when...
Page 51 - The screen image looks abnormal.; • See if the video card resolution and frequency; Vertical frequency:; Horizontal frequency:
50 Troubleshooting ● Is the screen position wrong? ● Do thin lines appear on the background screen? ● Horizontal noise appears or the characters look blurred. ● The screen is displayed abnormally. ● Nothing is displayed on the screen. The screen image looks abnormal. • D-Sub analog signal - Press th...
Page 52 - The audio function does not work.; After-image appears when the; TIME
51 • See if the audio cable is connected properly. • Adjust the volume. • See if the sound is set properly. • Adjust the Clear Voice ll, Treble and Bass appropriately. • Adjust the volume. ● No sound? ● Sound is too dull. ● Sound is too low. The audio function does not work. • If you use a fixed ima...
Page 53 - • Set the number of colors to more than 24 bits; Screen has poor color resolution; Screen color is abnormal.; The power suddenly turned off.; The operation does not work normally.
52 Troubleshooting • Set the number of colors to more than 24 bits (true color) Select Control Panel - Display - Settings - Color Table menu in Windows. • Check the connection status of the signal cable. Or, re-insert the PC video card. • Several pixels (red, green, white or black color) may appear ...
Page 54 - I have a problem with touch response.; ● Touch does not respond.
53 Troubleshooting I have a problem with touch response. • Check the USB cable connection. - This may occur when the USB cable between PC and monitor is not connected. Check the USB cable and make it firmly connected. * Check the connection on Windows 7 Control Panel > System and Security > Sy...
Page 55 - ● The location of a touch does not
54 Troubleshooting • Change your tablet PC settings (Windows 7). - This may occur when the touch screen is not calibrated properly. Control Panel > Hardware and Sound > Tablet PC Settings > Display > Display options > Calibrate or Reset * For information about gestures and settings on...
Page 56 - • Check the Internet cable connection.; ● My network connection is unstable.; My network connection is unstable.; • Check if the power cord is correctly plugged in; ● I cannot turn on the power.; There is a problem with the power.
55 Troubleshooting • Check the PC's or monitor's power. • Check the Internet cable connection. Restart your PC.- Touch may not respond when the system is down due to the unstable network. ● My network connection is unstable. My network connection is unstable. • Check if the power cord is correctly p...
Page 57 - Specifications; LCD Panel; Dimensions; Width x Height x Depth; Rated Voltage
56 Specifications • The specifications shown above may be changed without prior notice for quality improvement. Note LCD Panel Power Touchscreen Dimensions & Weight Width x Height x Depth 111.6 cm (44 inch) x 66.10 cm (26 inch) x 12.40 cm (4.8 inch) Net 34kg (74.96 lb) 47" class (46.9" d...
Page 58 - Audio; Applicable only for models that support the speakers; Video Signal
57 Specifications RMS Audio Output 10 W + 10 W ( R + L )Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Audio Applicable only for models that support the speakers • The specifications shown above may be changed without prior notice for quality improvement. Note Max. Resolution RGB: 1920x1080 @ 60 H...
Page 59 - PC Mode - Preset Mode; Preset mode; Power Indicator
58 Specifications PC Mode - Preset Mode 1 to 13: RGB mode *: HDMI/DVI mode Preset mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Preset mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 1 2 *3 4 *5 6 7 *8 9 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 7...
Page 60 - Connecting the cable
Controlling the Multiple Product RS-232C A1 Controlling the Multiple Product RS-232C A1 A1 Connecting the cable Connect the RS-232C cable as shown in the picture. You need to purchase a cable to connect the RS-232C socket as it is not provided as the accessory. The RS-232C protocol is used for commu...
Page 61 - Controlling the Multiple Product; Command Reference List
Controlling the Multiple Product RS-232C A2 Command Reference List COMMAND 1 COMMAND 2 DATA1 DATA2 DATA3 k a 00H to 01H k c 01H to 1FH k d 00H to 01H k e 00H to 01H k f 00H to 64H k g 00H to 64H k h 00H to 64H k i 00H to 64H k j 00H to 64H k k 00H to 64H k l 00H to 01H k m 00H to 01H k t 00H to 64H ...
Page 62 - COMMAND 1 COMMAND 2 DATA1 DATA2 DATA3
Controlling the Multiple Product RS-232C A3 COMMAND 1 COMMAND 2 DATA1 DATA2 DATA3 f u F1H to F4H f f 00H to 08H f g 00H to 01H f h 00H to 64H f i 00H to 09H f j 00H to 01H f k 00H to 02H f l 00H to 03H f o 00H to 01H f y FFH f z FFH x b 20H to B0H 02H to 0BH 30. Scheduling input select 31. Sleep Tim...
Page 63 - Transmission / Receiving Protocol
Controlling the Multiple Product RS-232C A4 OK Acknowledgement * The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC c...
Page 73 - Mode
Controlling the Multiple Product RS-232C A14 A14 Transmission / Receiving Protocol 20. Sound Mode (Command : d y ) ► To adjust the Sound mode. Transmission Data Structure Acknowledgement Data(Hex) 01 02 03 04 05 Mode Standard Music Cinema Sport Game 21. Fan Fault check (Command : d w ) ► To check th...
Page 75 - Automatically adjust the volume level.
Controlling the Multiple Product RS-232C A16 Controlling the Multiple Product RS-232C A16 Transmission / Receiving Protocol 25. Auto volume (Command : d u) ► Automatically adjust the volume level. Transmission Data 0 : Off 1 : OnAcknowledgement 26. Speaker (Command : d v) ► Turn the speaker on or of...
Page 76 - Set the current time.
Controlling the Multiple Product RS-232C A17 Transmission / Receiving Protocol 27. Time (Command : f a) ► Set the current time. Transmission [Data1] 0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday [Data2] 0H to 17H (Hours) [Data3] 00H to 3BH (Minutes) Acknowledge...
Page 80 - Transmission
Controlling the Multiple Product RS-232C A21 Transmission / Receiving Protocol 31. Sleep Time (Command : f f) ► Set Sleep Time. Transmission Data 0 : Off 1 : 10 2 : 20 3 : 30 4 : 60 5 : 90 6 : 120 7 : 180 8 : 240 Acknowledgement 32. Auto Sleep (Command : f g) ► Set Auto Sleep. Transmission Data 0 : ...
Page 85 - Remote Control IR Code
Controlling the Multiple Product RS-232C A26 IR Codes RS-232C A26 Remote Control IR Code Output waveform single pulse, modulated with 37.917kHz signal at 455kHz ► Configuration of frame T1 Tc ▪ Repeat frame Tf Repeat code ► Lead code ► Repeat code ► Bit description 2.25 ms 9 ms 0.55ms ► Frame interv...
Page 86 - MONITOR OFF
Controlling the Multiple Product RS-232C A27 IR Codes RS-232C A27 Code(Hex) Function Note UP (∧)DOWN (∨)RIGHT ( > ) LEFT ( < ) POWER ON/OFFMONITOR ON MONITOR OFF MUTEEnergy SavingINPUT MENU EXIT PSMOK Number Key 0Number Key 1Number Key 2Number Key 3Number Key 4Number Key 5Number Key 6Number Ke...
Page 87 - BF; Cinema; II
Controlling the Multiple Product RS-232C A28 IR Codes RS-232C A28 E0E12899 727163617BB0B1BA8F8E5A BF D5 C6 76 77 AF R/C ButtonR/C ButtonR/C ButtonR/C Button(Discrete IR Code)R/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C ButtonDiscrete IR Code(Input AV ...
Page 88 - mestic environment this product may cause; MODEL; Temporary noise is normal when powering; Important
M a k e s u r e t o r e a d t h e I m p o r t a n t Precautions before using the product. Keep the O wner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. WAR...
