Page 2 - WA R N I N G; REGULATORY INFORMATION; CAUTION; a r n i n g
2 Warning WA R N I N G : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ...
Page 3 - S a f e t y I n s t r u c t i o n s
3 Safety Instructions WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on theapparatus. IMPORTANT SAFETY INSTRUCTIONS 1....
Page 4 - For LCD TV
4 Safety Instructions 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the appa-ratus. When a cart is used, use caution when movingthe cart / apparatus combination to avoid injury fromtip-over. 13. Unplug this apparatus during lightning storms or...
Page 5 - C o n t e n t s; Introduction; Installation; Warnings
5 Contents C o n t e n t s C o n t e n t s Introduction Installation Operation 32 Turning on the TV 32 Volume Adjustment 32 Channel Selection 32 On Screen Menus Language Selection 33 On Screen Menus Selection and Adjustment 34 EZ Scan (Channel Search) 34 Manual Scan 35 Channel Edit 36 DTV Signal Str...
Page 6 - Reference; Option Menu; Operation; Time Menu
6 Contents Reference 44 Auto Clock Setup 44 Manual Clock Setup 45 On/Off Timer Setup 45 Sleep Timer 46 Auto Off 47 Aspect Ratio Control 48 Cinema 3:2 Mode Setup 48 Caption 49 Caption/Text 50 Caption Option 50 Low Power (42PC1D**/42PC3D**/50PC3D** only) 51 ISM (Image Sticking Minimization) Method (42...
Page 7 - A c c e s s o r i e s; I n t r o d u c t i o n; Option Extras
7 Introduction A c c e s s o r i e s A c c e s s o r i e s I n t r o d u c t i o n I n t r o d u c t i o n Owner’s Manual 75 Ω Round Cable Power Cord Ensure that the following accessories are included with your TV. If any accessory is missing, please contact thedealer where you purchased the product...
Page 8 - C o n t r o l s
8 Introduction C o n t r o l s C o n t r o l s (Model Name: 32/37/42LC2D**) (Model Name: 32/37/42LC2D**) - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV. R CH CH VOL VOL ENTER ENTER MENU MENU INPUT INPUT CHANNEL ( D , E ) Button...
Page 10 - Controls
10 Introduction Controls Controls (Model Name: 42PC1D**/42PC3D**/50PC3D**) (Model Name: 42PC1D**/42PC3D**/50PC3D**) - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV. CH VOL ENTER MENU INPUT CH VOL ENTER MENU INPUT CHANNEL ( D , E...
Page 11 - Connection Options
11 Introduction Connection Options Connection Options (Model Name: 42PC1D**/42PC3D**/50PC3D**) (Model Name: 42PC1D**/42PC3D**/50PC3D**) AV IN 2 AV IN 2 L/ L/MONO MONO R AUDIO AUDIO S-VIDEO S-VIDEO VIDEO VIDEO HDMI/DVI IN HDMI/DVI IN DIGITAL AUDIO DIGITAL AUDIO OUT OUT OPTICAL PTICAL RS-232C IN RS-23...
Page 12 - R e m o t e C o n t r o l K e y F u n c t i o n s; automatically, Only if these are connected)
12 Introduction R e m o t e C o n t r o l K e y F u n c t i o n s R e m o t e C o n t r o l K e y F u n c t i o n s POWER Turns your TV or any other programmed equipment on oroff, depending on mode. VOL CH POWER 1 2 3 4 5 6 7 8 0 9 MENU MUTE FAV DAY - GUIDE DAY+ RATIO VCR TV DVD ENTER APM ADJUST SAP...
Page 14 - When every external equipment is connected:; A u t o L i n k; When some External Equipment is connected:; in the; INPUT
14 Introduction VOL CH POWER 1 2 3 4 5 6 7 8 0 9 MENU MUTE FAV DAY - GUIDE DAY+ RATIO VCR TV DVD ENTER APM ADJUST SAP EZ SOUND EZ PIC FREEZE FLASHBK PAGE PAGE EXIT TIMER CC INFO AUDIO CABLE STB MODE TV INPUT INPUT 1. When every external equipment is connected: 2. When no external equipment is connec...
Page 15 - B r i e f I n f o .; INFO
15 Introduction VOL CH POWER 1 2 3 4 5 6 7 8 0 9 MENU MUTE FAV DAY - GUIDE DAY+ RATIO VCR TV DVD ENTER APM ADJUST SAP EZ SOUND EZ PIC FREEZE FLASHBK PAGE PAGE EXIT TIMER CC INFO AUDIO CABLE STB MODE TV INPUT INPUT B r i e f I n f o . B r i e f I n f o . What is Brief Info? : Brief Info shows the pre...
Page 16 - E P G ( E l e c t r o n i c P r o g r a m G u i d e ); Function; GUIDE; Installing Batteries
16 Introduction VOL CH POWER 1 2 3 4 5 6 7 8 0 9 MENU MUTE FAV DAY - GUIDE DAY+ RATIO VCR TV DVD ENTER FLASHBK PAGE PAGE EXIT TIMER CC INFO AUDIO CABLE STB MODE TV INPUT INPUT E P G ( E l e c t r o n i c P r o g r a m G u i d e ) E P G ( E l e c t r o n i c P r o g r a m G u i d e ) ( I n D T V m o ...
Page 17 - I n s t a l l a t i o n; Desktop Pedestal Installation; GROUNDING; Power; Various Installation
17 Installation I n s t a l l a t i o n I n s t a l l a t i o n Desktop Pedestal Installation 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches For proper ventilation, allow a clearance of 4" on each side and from the wall. GROUNDING Ensure that you connect the earth ground...
Page 18 - ment Connections; CABLE MANAGEMENT
18 Installation Connect the cables as necessary.After connecting the cables neat-ly, arrange the cables to theCable Holder. To connect an additional equip-ment, see the External equip- ment Connections section. Reinstall the CABLE MANAGE- MENT as shown. 1 2 Bundle the cables using the sup-plied twis...
Page 19 - B a s i c C o n n e c t i o n; When closing the stand for storage
19 Installation Place the set with the screen facing down ona cushion or soft cloth as shown.Before unfolding the stand, please make suretwo locks (A) on the bottom of the stand pushoutward. Pull the stand out as shown.After unfolding the stand, please insert andtighten the screws (provided as parts...
Page 20 - Notes; as that of the product.
20 Installation How to join the product assembly to the wall to protect the set tumbling - Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. - The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the prod- uct do...
Page 21 - Antenna or Cable Connection; E x t e r n a l E q u i p m e n t C o n n e c t i o n s; All cables shown are not included with the TV
21 Installation Antenna or Cable Connection Multi-family Dwellings/Apartments(Connect to wall antenna socket) Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna) Outdoor Antenna Wall Antenna Socket VHF Antenna UHF Antenna RF Coaxial Wire (75 ohm) Turn clockwise to tighten. AV I...
Page 22 - of the screen may remain visible on the screen.; VCR Setup; When connecting with an antenna
22 Installation - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. VCR Setup When connecting with a...
Page 23 - When connecting with an S-Video cable; External AV Source Setup
23 Installation When connecting with an S-Video cable S-VIDEO OUT IN (R) AUDIO (L) VIDEO 3 4 OUTPUT SWITCH ANT OUT ANT IN VIDEO AUDIO ( ) VIDEO AUDIO COMPONENT IN S-VIDEO AV IN 1 AV OUT ANTENNA IN CABLE IN VIDEO AUDIO MONO ( ) VIDEO AUDIO COMPONENT IN S-VIDEO AV IN 1 V IN 1 AV OUT V OUT VCR 1 1 2 2 ...
Page 24 - DVD Setup; When connecting with a S-Video cable; When connecting with a HDMI cable
24 Installation DVD Setup When connecting with a S-Video cable S-VIDEO (R) AUDIO (L) VIDEO AUDIO ( ) VIDEO AUDIO COMPONENT IN S-VIDEO AV IN 1 AV OUT VIDEO VIDEO AUDIO UDIO MONO ( ) VIDEO VIDEO AUDIO UDIO COMPONENT IN COMPONENT IN S-VIDEO S-VIDEO AV IN 1 V IN 1 AV OUT V OUT HDMI/DVI IN DIGITAL AUDIO ...
Page 25 - When connecting with a component cable
25 Installation When connecting with a component cable 1 2 3 4 5 Connect the video outputs (Y, P B , P R ) of the DVD to the COMPONENT IN VIDEO jacks on the set. Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set. Turn on the DVD player, insert a DVD. Select Component 1 ...
Page 26 - When connecting with a D-sub 15 pin cable; HDSTB Setup
26 Installation When connecting with a D-sub 15 pin cable 1 2 3 4 Connect the RGB output of the digital set-top boxto the RGB (PC/DTV) jack on the set. Connect the audio outputs of the set-top box tothe AUDIO (RGB/DVI) jack on the set. Turn on the digital set-top box. (Refer to theowner’s manual for...
Page 27 - When connecting with a Component cable; When connecting with a HDMI to DVI cable
27 Installation When connecting with a Component cable 1 2 3 4 Connect the video outputs (Y, P B , P R ) of the digi- tal set-top box to the COMPONENT IN VIDEO jacks on the set. Connect the audio output of the digital set-top boxto the COMPONENT IN AUDIO jacks on the set. Turn on the digital set-top...
Page 28 - Digital Audio Output; Monitor Out Setup; Connect the second TV or monitor to the TV’s; AV; • We recommend to use the video and audio
28 Installation Digital Audio Output 1 2 3 Connect one end of an optical cable to the TVDigital Audio Optical Output port. Connect the other end of the optical cable to thedigital audio optical input on the audio equipment. See the external audio equipment instructionmanual for operation. When conne...
Page 29 - PC Setup; RGB
29 Installation - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. PC Setup When connecting with a D-sub 15 pin cable 1 2 3 4 Connect the RGB output of the PC to the RGB (PC/DTV) jack on the set. Connect the PC audio outputs to the AUDIO (RGB...
Page 31 - - To initialize the adjusted values; Screen Setup for PC mode
31 Installation * Adjustment for screen Position, Size, and Phase * Initializing (Reset to original factory values) - To initialize the adjusted values Close POSITION G G SIZE PHASE RESET Adjust D D F F G G E E Close POSITION SIZE PHASE RESET G G Adjust Initialize Settings Position This function is ...
Page 32 - B a s i c o p e r a t i o n; CH; - The menus can be shown on the; On Screen Menus Language Selection; Volume Adjustment
O p e r a t i o n O p e r a t i o n B a s i c o p e r a t i o n B a s i c o p e r a t i o n 1. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the , INPUT , CH D D / E E button on the TV or press the POWER , TV INPUT , INPUT ...
Page 33 - O n S c r e e n M e n u s S e l e c t i o n a n d; button and then; How to adjust the OSD screen
33 Operation O n S c r e e n M e n u s S e l e c t i o n a n d O n S c r e e n M e n u s S e l e c t i o n a n d A d j u s t m e n t A d j u s t m e n t 1. Press the MENU button and then D D / E E button to select each menu. 2. Press the G G button and then use D D / E E / F F / G G button to displa...
Page 34 - S e t u p M e n u O p t i o n s; Manual Scan; - A password is required to gain; - Automatically finds all channels
34 Operation EZ Scan (Channel Search) S e t u p M e n u O p t i o n s S e t u p M e n u O p t i o n s Press the MENU button and then use D D / E E button to select the SETUP menu. Press the G G button and then use D D / E E button to select EZ Scan . Press the ENTER button to begin the channel searc...
Page 35 - - There are two different ways in; on the; - A Custom List can be created by; Channel Edit
35 Operation - There are two different ways in order to add or delete scannedchannels. One is "Custom List"and the other is "Favorite List" inthe channel list. Both of them areavailable after EZ Scan on the SETUP menu. - A Custom List can be created by toggling each channel on or off...
Page 36 - DTV Signal Strength; - Changes the picture source so; S e t u p M e n u O p t i o n s c o n t i n u e d
36 Operation DTV Signal Strength - Shows how strong your DTV sig- nal is and whether you need toadjust your antenna or digitalcable input. The higher the signalstrength, the less likely you areto experience picture degrada-tion. - DTV Signals: Only when the input signal is DTV or CADTV,this function...
Page 37 - - Sets a label to each input source; Input Label
37 Operation - Sets a label to each input source or lets you skip the input sourcewhich is not in use when youpress INPUT button. Input Label Press the MENU button and then use D D / E E button to select the SETUP menu. Press the G G button and then use D D / E E button to select Input Label . Press...
Page 38 - - It allows a viewer to select their; i d e o M e n u O p t i o n s; EZ Picture; - EZ Picture adjusts the TV for the best
38 Operation APM (Adaptive Picture Mode) - It allows a viewer to select their preferred mode after comparingpicture (Daylight, Normal, NightTime and Custom) settings. - Note: While operating the 4-split, any button except APM , ENTER , EXIT , D D / E E / F F / G G , VOLUME D D / E E , MUTE button on...
Page 39 - Color Temperature Control; - Choose one of three automatic; Manual Picture Control (; - Adjust the picture appearance to; Video Reset
39 Operation Color Temperature Control Previous MENU EZ Picture Contrast Brightness Color Sharpness Tint Color Temperature G Video Reset Cool Medium Warm Previous MENU EZ Picture Contrast Brightness Color Sharpness Tint Color Temperature Video Reset G Selection ( G or ) resets to the factory setting...
Page 40 - A u d i o M e n u O p t i o n s; - Other languages may be available; Audio Language
40 Operation A u d i o M e n u O p t i o n s A u d i o M e n u O p t i o n s - Other languages may be available if a digital signal is provided by thebroadcasting station. - Scans for changes in sound level during commercials, then adjuststhe sound to match the specifiedaudio level. EZ SoundRitemake...
Page 41 - EZ Sound; - EZ Sound lets you enjoy the best
41 Operation EZ Sound Manual Sound Control ( EZ Sound-Custom option) - EZ Sound lets you enjoy the best sound without any special adjust-ment because the TV sets theappropriate sound options basedon the program content. - When adjusting sound options (treble, bass, and front surround)manually, EZ So...
Page 42 - A u d i o M e n u O p t i o n s c o n t i n u e d; is a trademark of SRS; Stereo/SAP Broadcasts Setup
42 Operation A u d i o M e n u O p t i o n s c o n t i n u e d A u d i o M e n u O p t i o n s c o n t i n u e d - is a trademark of SRS Labs, Inc. - TruSurround XT technology is incorporated under license fromSRS Labs, Inc. - Manufactured under license from Dolby Laboratories. “Dolby” andthe double...
Page 43 - - BBE High Definition Sound; TV Speakers On/Off Setup; - Turn TV speakers off if using; BBE
43 Operation - BBE High Definition Sound restores clarity and presence forbetter speech intelligibility andmusic realism. TV Speakers On/Off Setup - Turn TV speakers off if using external audio equipment.Feature turns the TV Speakersoption On or Off. BBE Press the MENU button and then use D D / E E ...
Page 44 - i m e M e n u O p t i o n s; reset the clock manually.; Auto Clock Setup; - The time is set automatically
44 Operation T T i m e M e n u O p t i o n s i m e M e n u O p t i o n s - If current time setting is wrong, reset the clock manually. Auto Clock Setup Manual Clock Setup Press the MENU button and then use D D / E E button to select the TIME menu. Press the G G button and then use D D / E E button t...
Page 45 - Sleep Timer; TIMER
45 Operation On/Off Timer Setup Sleep Timer - Timer function operates only if current time has been set. - Off-Timer function overrides On- Timer function if they are set bothset to the same time. - The TV must be in standby mode for the On-Timer to work. - If you do not press any button within 2 ho...
Page 46 - i m e M e n u O p t i o n s c o n t i n u e d; Auto Off; - If the TV is on and there is no
46 Operation T T i m e M e n u O p t i o n s c o n t i n u e d i m e M e n u O p t i o n s c o n t i n u e d Auto Off - If the TV is on and there is no input signal, the TV turns offautomatically after 10 minutes. Press the MENU button and then use D D / E E button to select the TIME menu. Press the...
Page 47 - Aspect Ratio Control; O p t i o n M e n u F e a t u r e s; - If you are viewing a picture with a; button repeatedly to select the desired picture format.; RATIO
47 Operation Aspect Ratio Control O p t i o n M e n u F e a t u r e s O p t i o n M e n u F e a t u r e s - Lets you choose the way an ana- log picture with a 4:3 aspect ratiois displayed on your TV with a16:9 ratio picture format. Whenyou receive an analog picturewith a 4:3 aspect ratio on your16:9...
Page 48 - Caption; Cinema 3:2 Mode Setup; - This feature operates only in; O p t i o n M e n u F e a t u r e s c o n t i n u e d
48 Operation Caption Press the MENU button and then use D D / E E button to select the OPTION menu. Press the G G button and then use D D / E E button to select Caption. Press the G G button and then use D D / E E button to select Off or On . Press EXIT button to return to TV viewing or press MENU b...
Page 49 - tion at any position on the screen.; * Digital Broadcasting System Captions; - Choose the language you want
49 Operation - Select a caption mode for dis- playing captioning information ifprovided on a program. - Analog caption displays informa- tion at any position on the screen. - Text displays information, usually at the bottom position and isused for a data service. - Caption/Text, if provided by the b...
Page 50 - tions that appear on your screen.; Caption Option; - Low power reduces the power
50 Operation - Customize the DTV/CADTV cap- tions that appear on your screen. Caption Option Press the MENU button and then use D D / E E button to select the OPTION menu. Press the G G button and then use D D / E E button to select Caption Option . Press the G G button and then use F F / G G button...
Page 51 - - A frozen still picture from a
51 Operation - A frozen still picture from a PC/video game displayed on thescreen for prolonged periods willresult in a ghost image ; eventhough the image is changed.Use our unique method to mini-mize any fixed image on thescreen. ISM (Image Sticking Minimization) Method (42PC1D**, 42PC3D**, 50PC3D*...
Page 52 - L o c k M e n u O p t i o n s
52 Operation L o c k M e n u O p t i o n s L o c k M e n u O p t i o n s Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast-ing station. The def...
Page 53 - - Set up blocking schemes to; Parental Lock Setup; Set Password; For USA
53 Operation - Set up blocking schemes to block specific channels, ratings,and external viewing sources. - A password is required to gain access to this menu if the LockSystem is turned on. Parental Lock Setup Previous MENU Lock System G Set Password Block Channel Movie Rating TV Rating-Children TV ...
Page 54 - y p e o f C o n n e c t o r D - S u b 9 - P i n M a l e; E x t e r n a l C o n t r o l D e v i c e S e t u p; R S - 2 3 2 C S e t u p
54 Reference No. Pin Name 1 No connection 2 RXD (Receive data) 3 TXD (Transmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 8 CTS (Clear to send) 9 No Connection 1 5 6 9 2354678 RXD TXD GND DTR DSR RTSCTS TXD RXD GND DSR DTR CTSRTS PC 7-Wire Configurations (Serial ...
Page 55 - S e t I D; C o m m u n i c a t i o n P a r a m e t e r s; r a n s m i s s i o n / R e c e i v i n g P r o t o c o l; C o m m a n d R e f e r e n c e L i s t
55 Reference S e t I D S e t I D - Use this function to specify a TV ID number. - Refer to ‘Real Data Mapping’. See page 56. • Baud rate : 9600 bps (UART)• Data length : 8 bits• Parity : None• Stop bit : 1 bit• Communication code : ASCII code * Use a crossed (reverse) cable. C o m m u n i c a t i o ...
Page 60 - I R C o d e s; How to Connect
60 Reference G Connect your wired remote control to the Remote Control port on the TV. G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz G Configuration of frame G Repeat code G Lead code • 1st frame Low custom code Lead code High custom code Data code Data code T C T f T1 C0...
Page 62 - P r o g r a m m i n g t h e R e m o t e; Programming a code into a remote mode
62 Reference G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers.Note that the remote control may not control all models of other brands. P r o g r a m m i n g t h e R e m o t e P r o g r a m m i n...
Page 63 - P r o g r a m m i n g C o d e s; VCRs
63 Reference P r o g r a m m i n g C o d e s P r o g r a m m i n g C o d e s AIWA 034 AKAI 016 043 046 124125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064065 108 1...
Page 64 - Digital Cable/Satellite Box
64 Reference APEX DIGITAL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027JVC 012 LG 001 010 016 025 MAGNAVOX 013 MARANTZ 024 MITSUBISHI 002 NAD 023 ONKYO 008 017 PANASONIC 003 009 PHILIPS 013 PIONEER 004 026 PROCEED 021 PROSCAN 005 006 RCA 005 006 SAMSUNG 011 015 SONY 007 THOMPSON 005 006 TOSHIBA 019...
Page 65 - r o u b l e s h o o t i n g C h e c k l i s t; The video function does not work.; where the product’s power cord was plugged in.; The operation does not work normally.; control causing obstruction.
65 Reference T T r o u b l e s h o o t i n g C h e c k l i s t r o u b l e s h o o t i n g C h e c k l i s t The video function does not work. No picture & No sound No or poor color or poor picture • Adjust Color in menu option.• Keep a sufficient distance between the product and the VCR.• Try a...
Page 66 - The audio function does not work.; • Press the; There is a problem in PC mode.; C l e a n i n g t h e S c r e e n; M a i n t e n a n c e
66 Reference The audio function does not work. Picture OK & No sound • Press the VOL or VOLUME button. • Sound muted? Press MUTE button. • Try another channel. The problem may be with the broadcast.• Are the audio cables installed properly? Unusual soundfrom inside the product • A change in ambi...
Page 67 - P r o d u c t S p e c i f i c a t i o n s
67 Reference P r o d u c t S p e c i f i c a t i o n s P r o d u c t S p e c i f i c a t i o n s • The specifications shown above may be changed without prior notice for quality improvement. 32LC2D (32LC2D-UD) 32LC2DC (32LC2DC-UD) AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2 ~ 13, UHF 1...
