Page 2 - WARNING
2 206-4214 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE CO...
Page 3 - Outdoor Use/Wet Location; IMPORTANT SAFETY INSTRUCTIONS
3 206-4214 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer’s instructions. 8. Do not ins...
Page 5 - Table of Contents; Learning / Teaching a Master TV Setup using; Notes
5 206-4214 Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Com...
Page 6 - Commercial Mode Overview; Setup Checklist
6 206-4214 Commercial Mode Overview This document describes how to set up LT770H Pro:Centric ® TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU, Protocol Translator Card (PTC), or embedded b...
Page 7 - Installer Menu; External MPI Control
7 206-4214 Commercial Mode Overview (Cont.) Typical Installer Menu TV Setup Menus Installer Menu To create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu and make changes to the default values as required. If necessary, familiarize yourself with...
Page 8 - FTG Mode; This mode enables Pro:Idiom; Remote Management in FTG Mode; Pro:Centric Server Admin
8 206-4214 FTG Mode This mode enables Pro:Idiom ® decryption and also allows logical channel mapping of physical channels to remove the need for dash tuning. TV operation in FTG Mode is based on which element of the TV owns the FTG Logical Channel Map—the CPU or the EBL. Understanding the applicatio...
Page 9 - Pro:Centric Operation; Pro:Centric TV Interactive Menu Features; PORTAL
9 206-4214 Pro:Centric Operation Pro:Centric TV Interactive Menu Features When running the Pro:Centric application, the interactive Pro:Centric TV enables guests to locate and select television entertainment using an interactive channel guide, check the daily weather, and view hotel and surrounding ...
Page 11 - To exit the Automated Installation Routine Wizard; Automated Installation Routine Wizard
11 206-4214 The Automated Installation Routine Wizard will appear on the screen each time the TV is turned ON, until one of its configuration methods has been completed or the wizard is exited. The wizard’s Welcome screen provides a selection of configuration methods: Auto or Manual options for conf...
Page 12 - Pro:Centric Auto Configuration
12 206-4214 Automated Installation Routine Wizard (Cont.) Auto Configuration Processing Pro:Centric Configuration. Step 2 may take up to 15 min(s). Please wait... Step 1 Detecting the type of Pro:Centric network Step 2 Locating the Pro:Centric Server Step 3 Determining the Pro:Centric mode Step 4 Do...
Page 13 - Manual Configuration Screen with
13 206-4214 Automated Installation Routine Wizard (Cont.) (Continued from previous page) RF Configuration a) In the Media Type field, use the Left/Right arrow keys to select RF . b) In the Data Channel field, either key in or use the Left/Right arrow keys to select the RF channel number for the Data...
Page 14 - Configuring TV
14 206-4214 Automated Installation Routine Wizard (Cont.) USB Configuration Configuring TV Please wait... 95% Warning - Do not remove the USB device during this process Please select configuration file (*.tlx) xxLT770H-UA00001.TLX Accessing USB Storage Device OK Move Prev. 1. Plug the USB memory dev...
Page 15 - Custom Master TV Setup; Clonable TV Setup Menu Features
15 206-4214 Custom Master TV Setup Channel Auto Tuning (Channel Lineup) Manual Tuning Channel Edit Channel Label Picture Picture Mode Audio Auto Volume Clear Voice Sound Mode Balance TV Speaker Time Auto Clock Auto Off (Sleep Timer) Option Menu Language Audio Language Caption Lock Movie Rating TV Ra...
Page 16 - Typical Installer Menu; Custom Master TV Setup Procedure; Exit
16 206-4214 Custom Master TV Setup (Cont.) 2. Set Installer Menu items. This step provides specific instruction only on the Installer Menu items that should be set on a Master TV. Refer to pages 19 to 27 for detailed information on all Installer Menu items. a) Use the Installer Remote to access the ...
Page 17 - CHANNEL; select channel icons.
17 206-4214 Use the TV setup menus to set the TV features to the desired configuration for the end user. PICTURE AUDIO INPUT OPTION TIME SmartShare CHANNEL LOCK Custom Master TV Setup (Cont.) CHANNEL OK Move • Auto Tuning • Manual Tuning • Channel Edit • Channel Label (Optional) Use Channel Menu opt...
Page 18 - After verifying the TV Setup, set Installer; WXYZ; Custom text label “WXYZ” created; MENU SETTINGS
18 206-4214 Custom Master TV Setup (Cont.) 6. (Optional) Add Custom Channel and Aux Input Labels: 2-5-4 + MENU Mode Note: 2-5-4 + MENU Mode enables you to add/edit channel icons and custom text labels in the PTC once the Master TV Setup has been transferred as described in the previous step.Access t...
Page 19 - Accessing the Installer Menu
19 206-4214 Installer Menu Typical Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to the table on pages 21 and 22 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu 1. Turn ON...
Page 23 - Detailed Descriptions of Installer Menu Items; 00 - INSTALLER SEQUENCE
23 206-4214 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Mana...
Page 28 - XYZ; NETWORK
28 206-4214 Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel-Time display. 3. Use the Up/Down arrow keys to select th...
Page 29 - Cloning Overview; IMPORTANT CLONING INFORMATION; step, and cloning may not be successful.; damage the clone programmer.; displayed when you press
29 206-4214 Cloning Overview IMPORTANT CLONING INFORMATION There are four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 15):• Using a USB memory device / .tlx file• Using a USB memory device / .tll file• Using a T...
Page 30 - USB Cloning Procedures
30 206-4214 USB Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device / .tlx File USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 29 before beginning any cloning procedures. In particular, ensure that the Master TV Setup does not contain a Channel Map;...
Page 34 - Clone Programmer Cloning Procedures; MPI
34 206-4214 Clone Programmer Cloning Procedures Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Tune/set the TV to an analog channel or Aux input, and then, plug one end of the MPI cable into the TV MPI port. 3. Turn ON the TLL-1100A. 4. Use the M...
Page 38 - FTG Mode of Operation Overview; FTG Mode via CPU; Pro:Centric Server Admin Client User Guide; FTG Mode via EBL; User Guide; FTG Mode via CPU or EBL
38 206-4214 FTG Mode of Operation Overview FTG Mode via CPU This mode provides the following features:• Logical channels mapped to either RF or IP delivered content. • Digital RF channel minor (program) numbers up to 999.• FTG Channel Map of up to 600 logical channels.• Start Channel set for RF, Aux...
Page 39 - TV Setup Menus; Shows that the TV is in; Function Menu; Indicates the TV is not in Pass-through; SmartShare; ASPECT RATIO; for further information on the FTG File Manager. Refer to the; Determining the TV Operating Mode; To determine the operating mode of the TV, press; on the Installer Remote. The menu
39 206-4214 FTG Mode of Operation Overview (Cont.) PICTURE AUDIO INPUT OPTION TIME SmartShare CHANNEL LOCK TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV is not in Pass-through Mode . While the TV is in this mode, Installer Menu settings can be accessed as ...
Page 40 - Creating an FTG Configuration File using the FTG File Manager
40 206-4214 FTG Mode via CPU Creating an FTG Configuration File using the FTG File Manager This section describes how to create an FTG Configuration (.tlx) file that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Configuration f...
Page 42 - Teaching FTG Configuration to a TV
42 206-4214 Teaching FTG Configuration to a TV This section describes how to “Teach” an FTG Configuration file from a USB memory device to a TV. Ensure you have completed the procedure on the previous page to create the FTG Configuration file before proceeding with the steps below. Notes: • If the T...
Page 43 - Learning FTG Configuration from a TV
43 206-4214 FTG Mode via CPU (Cont.) 1. Turn ON the TV, and then plug a USB memory device into the USB IN port on the TV. 2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode). 3. Use the arrow navig...
Page 44 - Optional Manual Configuration / TV Setup; keys on the Installer Remote to select; from the Welcome screen, and press; to exit the wizard. Note that in this
44 206-4214 FTG Mode via CPU (Cont.) Typical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Use Channel Menu options to run Auto Tuning and edit the channel lineup, as necessary. Adjust the values for these Installer Menu items. 117 FACT DEFAULT 000 ...
Page 45 - FTG File Manager Utilities Overview; when copied to the list. If you make any change(s) to the current data; FTG CONFIGURATION LIST; FTG File Manager Main Screen; TV SETUP MENU LIST
45 206-4214 FTG File Manager Utilities Overview Note: The data referenced in the FTG Configuration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FTG Configuration L...
Page 46 - FTG Channel Map Configuration Utility; PRINT MAP
46 206-4214 FTG File Manager Utilities Overview (Cont.) FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to create, view, edit, and print a Logical Channel Map. PRINT MAP Click to display a printable FTG Channel Map Report. The report can also be exported a...
Page 47 - FTG Channel Map Editor
47 206-4214 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and ...
Page 48 - CONFIGURATION SETTINGS; Select tabs for categories of Installer; FTG Installer Menu Configuration Utility; for further information.
48 206-4214 FTG File Manager Utilities Overview (Cont.) CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. FTG Installer Menu Configuration Utility Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specific parameters. Refer to the Free-To- Guest (FT...
Page 49 - IP Environment Setup; Configuring the Network Connection; IP Environment; Accessing the IP Environment Menu
49 206-4214 IP Environment Setup The IP Environment Menu enables you to set up the network features of the TV. With the exception of Network Connection and Network Status settings, the IP Environment Menu is editable (with the Installer Remote) only if the TV is in Pass-through Mode and read-only wh...
Page 51 - Network Status
51 206-4214 2. Follow the on-screen instructions to complete the appropriate network configuration. Use the Installer Remote navigate fields and make entries, etc. Once you have specified configuration details as necessary, the TV will attempt to connect to the network and you will see a progress sc...
Page 52 - IP Stream Control
52 206-4214 IP Environment Setup (Cont.) Audio PTS OffsetVideo PTS OffsetPCR OffsetIGMP Version 0 0 0 < > < > < > Close 2 < > IP Stream Control If necessary, due to an audio and/or video stream delay, IP Stream Control options enable you to compensate for synchronization irre...
Page 54 - Wake On LAN Setup
54 206-4214 IP Configuration 1. In the Media Type field, use the Left/Right arrow keys to select IP . Note: If the Media Type has already been set in the Automated Installation Routine Wizard, the specified value will be reflected in this field. Note: Setting the Media Type to “IP” automatically set...
Page 55 - Media Share Setup
55 206-4214 1. With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select Media Share . Then, press OK . 2. In the Media Share pop-up window, use the Up/Down arrow keys on the Installer Remote to navigate between fields, and use the Left/Right arrow keys to select ...
Page 56 - Remote Jack Pack Setup; RJP AVAILABLE; TV Connections; Remote Jack Pack / TV Connections & Setup; RJP INTERFACE
56 206-4214 Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 001). See Installer Menu detailed descriptions for further informati...
Page 57 - Reference: Upgrading TV/PTC Software using a USB Memory Device; Upgrading TV/PTC Software; Typical Installer
57 206-4214 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade files must be stored in a folder named “LG_DTV” in the root directory of the USB memory device. Also, ensure the USB device has been formatted with FA...
Page 58 - Reference: Downloading a Splash Screen using a USB Memory Device; Splash Screen Image File Guidelines
58 206-4214 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image may be either a baseline (not progressive) JPEG or a 24-bit (RGB 8 x 8 x 8) BMP. • A JPEG image should be no larger than 1 MB.• A BMP image should be no larger t...
Page 59 - Reference: Power Consumption Settings; Back Lighting
59 206-4214 Reference: Power Consumption Settings The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 003 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 202). Item 099 Back Lighting (Static) 32LT770H 37LT770H 42LT770H 47LT770H...
Page 60 - Reference: TV Aux Input Configuration
60 206-4214 Reference: TV Aux Input Configuration DIRECT ACCESS Tuning TV ENABLE MPI DATA START AUX SOURCE ASSIGN- MENT Installer Menu MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) DATA STATUS TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Inp...
Page 63 - RJP Input Auto-sensing Hierarchy; Priority; Digital Video In; RJP Legacy Models
63 206-4214 Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Input Auto-sensing Hierarchy Priority Video Audio 1st (Highest) Digital Video In Audio In (3.5mm) 2nd PC Video In Audio In (L/R) 3rd Video In Digital Video In RJP Legacy Models • RJP-101M• RJP-101ML• RJP-110F • RJP-110FW• R...
Page 64 - Additional FTG Mode via EBL Options; will remain in the CPU after the reset is completed.
64 206-4214 This section describes how to restore factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV(s) to Pass-thro...
Page 65 - Reference: TV Zone Restrictions; OPTION
65 206-4214 Reference: TV Zone Restrictions The FTG Channel Map Editor in the FTG File Manager’s FTG Channel Map Configuration Utility enables you to assign Zone restrictions to channels that may be deemed unsuitable for certain locations, for example, a hotel lobby. In the FTG Channel Map Editor, a...
Page 66 - or
66 206-4214 OPTION OK Move > > • Caption : Off • Balloon Help : On • Set ID : 1 • Demo Mode : Off • Zone : 0 • TV Name : [TV]207KJCZA9J740 • Wi-Fi Screen Share When the TV’s Wi-Fi Screen Share feature is enabled in the IP Environment / Media Share Menu (see “Accessing the IP Environment Menu” ...
Page 67 - Reference: LT770H Rear and Side Jack Panels; UPDATE; Side Jack Panel; HDMI; OPTICAL DIGITAL
67 206-4214 RGB IN (PC) ANTENNA/ CABLE IN TV-LINK CFG AUDIO IN (RGB/DVI) SPEAKER OUT(8Ω) SERVICE ONLY RESET UPDATE RJP INTERFACE GAME CONTROL /MPI RS-232C (SERVICE & EXT POWER) VID EO L/M ON O -AU DIO - R AV IN L R 2 / DVI IN 1 (ARC) LAN OPTICAL DIGITAL .......... .......... AUX LAN Reference: L...
Page 68 - Reference: External Speaker Setup; Do NOT plug in a mono or stereo connector, as this may damage the TV.
68 206-4214 Reference: External Speaker Setup The four-contact SPEAKER OUT jack on the LT770H rear panel provides stereo speaker level signal outputs (left +, left -, right +, right -) for a pair of 8 ohm external speakers. Outputs are variable based on the internal speaker volume level. Refer to th...
Page 69 - Reference: Installer Remote Control Typical Key Functions; CH; CC; from the Installer Remote supplied with the TV.
69 206-4214 Reference: Installer Remote Control Typical Key Functions CH VOL 1 2 34 5 67 8 0 9 P A G E Q.MENU CHAR/NUM FLASHBK EXIT OK GUIDE PORTAL TV DVD INPUT MARK CC TIMER MUTE INFO PIP PIPCH+ PIPCH- SWAP PIP INPUT SAP MENU SETTINGS abc def ghi jkl mno pqrs tuv wxyz .,; @ DELETE The LG Installer ...
Page 70 - Troubleshooting; General Troubleshooting; Some Quick and Easy Tips for Resolving Problems
70 206-4214 Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptom Possible Cause(s) Possible Solution(s) Installation Cannot direct enter channel number. (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended s...
Page 71 - Troubleshooting Flow Chart
71 206-4214 Troubleshooting (Cont.) Troubleshooting Flow Chart Controller Quick Check STATUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Yes No No Yes Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. PO...
Page 72 - Commercial Mode Check / FTG Operation Troubleshooting; FTG Operation Troubleshooting; Symptom; Commercial Mode Check
72 206-4214 Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting TV turned ON? Yes No Press POWER on Installer Remote. TV is not in Commercial Mode. Call Technical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Yes Press MENU r...
Page 73 - Clone Programmer Troubleshooting; Reset Clone Programmer After Static Shock; clone programmer clock from a TV containing the correct time.; Clone Programmer; Master and Target TVs
73 206-4214 Caution: If the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port, as this will damage the clone programmer. Troubleshooting (Cont.) Clone Programmer Troubleshooting Reset Clone Programmer...
Page 74 - Glossary of Terms
74 206-4214 Glossary of Terms Automated Installation Routine Wizard Lodging model TV configuration wizard that provides configuration options for Pro:Centric operation as well as an option for using a USB memory device to config- ure a TV for FTG Mode via CPU. b -LAN LodgeNet Interactive Corporation...
Page 75 - Document Revision History / Open Source Software Notice; Open Source Software Notice; Date; Revision A: New document
75 206-4214 Document Revision History / Open Source Software Notice Open Source Software Notice Document Revision History Date Description September 2012 Revision A: New document October 2012 Revision B: Automated Installation Routine Wizard, IP Environment Menu, and Wi-Fi Screen Share updates Produ...
