Page 2 - ENG; ENGLISH; TABLE OF CONTENTS
2 ENG ENGLISH TABLE OF CONTENTS TABLE OF CONTENTS 3 LICENSES 4 ASSEMBLING AND PREPARING 4 Accessories5 Parts and buttons 6 STORAGE METHOD FOR PANEL PROTECTION 6 - Correct Method 6 - Incorrect Method 7 Using the IR Receiver 8 Mounting on a wall 9 REMOTE CONTROL 11 USING THE MONITOR 11 Connecting to a...
Page 3 - LICENSES; NOTE
ENGLISH 3 LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other cou...
Page 4 - ASSEMBLING AND PREPARING; Accessories; CAUTION; Remote control and Batteries; IR Receiver
4 ENG ENGLISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accesso...
Page 5 - Parts and buttons; Screen Buttons/ Screen Marks
5 ENG ENGLISH ASSEMBLING AND PREPARING Parts and buttons Screen Buttons/ Screen Marks Connection panel Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus.Adjust the up and down.Adjusts the volume level. AUTO/SET Displays the...
Page 6 - Correct Method; STORAGE METHOD FOR PANEL PROTECTION
6 ENG ENGLISH ASSEMBLING AND PREPARING Correct Method Incorrect Method STORAGE METHOD FOR PANEL PROTECTION If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel not to touch the floor. When laying down the product, lay a cushion...
Page 7 - Using the IR Receiver; IR Receiver cable
7 ENG ENGLISH ASSEMBLING AND PREPARING Using the IR Receiver This allows a remote control sensor to be placed in a custom location. y y The IR receiver is made with a magnet. You can attach the IR receiver on the side, top, or bottom of the product. y y It may fall down if exposed to external shock....
Page 8 - Mounting on a wall
8 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm ...
Page 9 - REMOTE CONTROL
9 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL (POWER) Turns the Monitor on or off. MONITOR ON / OFF Turn off the monitor and then turn it back on. 1/a/A Button This button selection is not applicable. CLEAR This button selection is not applicable. The descriptions in this manual are based on the butto...
Page 11 - USING THE MONITOR; Connecting to a PC
11 ENG ENGLISH USING THE MONITOR USING THE MONITOR Connecting to a PC Your Monitor supports the Plug & Play* feature. * Plug & Play: This is the function that allows a PC to use the monitor without installing a driver. NOTE y y Connect the signal input cable and tighten it by turning the scr...
Page 12 - DVI connection
12 ENG ENGLISH USING THE MONITOR DVI connection Transmits digital video signals to the monitor. Con-nect the monitor using the DVI cable as illustrated below. Select the DVI input after connecting. To transmit an audio signal, connect additional audio cables. Display Port connection Transmits the di...
Page 13 - IR Receiver connection; HDMI connection
13 ENG ENGLISH USING THE MONITOR IR Receiver connection Allows the use of a wired remote or IR receiver extension. y y Make sure the power cable is disconnected. NOTE Back of the Product y y Use a High Speed HDMI ®/TM cable. y y Use a certified cable with the HDMI logo attached. If you do not use a ...
Page 14 - LAN connection
14 ENG ENGLISH USING THE MONITOR LAN connection A Using a router(Switch) Monitor Network PC LAN Switch Monitor Network PC LAN B Using the Internet.
Page 15 - Daisy Chain Monitors; DP Cable
15 ENG ENGLISH USING THE MONITOR y y The number of monitors that can be connected to one output may vary depending on signal strength and signal loss. If you want to connect more than this number of monitors, it is recommended to use a distributor. y y It is also recommended to use lossless cables w...
Page 16 - Using additional options; Adjusting aspect ratio; ARC
16 ENG ENGLISH USING THE MONITOR Using additional options Adjusting aspect ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching content. y y If a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent d...
Page 17 - ENTERTAINMENT; Connecting to a wired network; MENU
17 ENG ENGLISH ENTERTAINMENT ENTERTAINMENT Connecting to a wired network (Depending on model) Connect the display to a local area network (LAN) via the LAN port as shown on the following illustra-tion and set up the network settings.This monitor only supports a wired network con-nection.After making...
Page 18 - Network Setting
18 ENGLISH ENTERTAINMENT y y If you want to access the Internet directly on your display, the internet connection should always be on. y y If you cannot access the Internet, check the network conditions from a PC on your network. y y When you use Network Setting , check the LAN cable or check if DHC...
Page 19 - CUSTOMIZING SETTINGS; Menu Settings
19 ENG ENGLISH CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Menu Settings 1 To view the Menu OSD, press the Menu button at the bottom of the monitor. 2 Use the < or > buttons to set the options. 3 Select button to exit the OSD menu. Each option is described below. 100 70 30 DVI Wide Time Network ...
Page 20 - Ratio Settings; Sub Menu
20 ENG ENGLISH CUSTOMIZING SETTINGS Ratio Settings 1 To view the Menu OSD, press the Menu button at the bottom of the monitor. 2 Press < or > to go to Ratio . 3 Press OK to select Ratio . 4 Use the < or > buttons to set the options. 5 Select to exit the OSD menu. Ratio Sub Menu Wide Orig...
Page 22 - PIP settings
22 ENG ENGLISH CUSTOMIZING SETTINGS Sub Menu PIP Size Position Balanced Off Bottom R PIP Reset Back Exit Each option is described below. PIP settings 1 To view the Menu OSD, press the Menu button at the bottom of the monitor. 2 Press < or > to go to PIP . 3 Press OK to select PIP . 4 Use the &...
Page 24 - Picture
24 ENG ENGLISH CUSTOMIZING SETTINGS Picture 1 To view the Menu OSD, press the Menu button at the bottom of the monitor. 2 Press < or > to go to Picture . 3 Press OK to select Picture . 4 Use the < or > buttons to set the options. 5 Select to exit the OSD menu. Each option is described be...
Page 27 - Tile Mode
27 ENG ENGLISH CUSTOMIZING SETTINGS ID 1 ID 2 ID 3 ID 4 1X2When using 2 monitors 2X2When using 4 monitors Before After Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. OffWhen the Tile Mode option is disabled Tile Mode - Natural mode When active, the part...
Page 30 - TROUBLESHOOTING; No image is displayed; 'Unknown Product' message appears when the product is connected.; The screen image looks abnormal.
30 ENG ENGLISH TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord connected? y See if the power cord is properly connected to the outlet. Does the 'Out of range' message appear? y The signal from the PC (video card) is out of the vertical or horizontal...
Page 31 - Screen color is abnormal.; The audio function does not work.
31 ENG ENGLISH TROUBLESHOOTING Screen color is abnormal. Problem Resolution Screen has poor color resolution (16 colors). y Set the number of colors to more than 24 bits (true color) Select Control Panel - Display - Settings - Color Table menu in Windows. Screen color is unstable or mono-colored. y ...
Page 32 - SPECIFICATIONS; * Applicable only for models that support the speakers
32 ENG ENGLISH SPECIFICATIONS SPECIFICATIONS LCD Panel Screen Type 73.0 cm TFT (Thin Film Transistor)LCD (Liquid Crystal Display) Panel.Visible diagonal size : 73.0 cm29" class (28.7" / 73.0 cm diagonal) Pixel Pitch 0.4833 mm (H) x 0.4833 mm (V) Video Signa Max. Resolution 2560 x 1080 @ 60 H...
Page 33 - Dimensions
33 ENG ENGLISH SPECIFICATIONS M4 X L10 (wall mounting screw)/ Depth 11mm (maximum) Dimensions The illustrations in this manual may differ from the actual product and accessories.Please see the "Mounting on a wall" section for sizes of screws. 313.2 29 697.2 48.95 50.9 248.4 200 200 Product s...
Page 34 - AV Mode
34 ENG ENGLISH SPECIFICATIONS DVI/Display Port/HDMI(PC) supported mode. Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.468 70.08 640 x 480 31.469 59.94 640 x 480 37.5 75 800 x 600 37.879 60.317 800 x 600 46.875 75.0 1024 x 768 48.363 60.0 1024 x 768 60.123 75.029 1152 x 864...
Page 35 - CONTROLLING THE MULTIPLE PRODUCT; Connecting the cable; Communication Parameter
35 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT y y Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. y y In the Option menu, Set ID must be between 1 and 99 without being duplica...
Page 36 - Command Reference List
36 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT Command Reference List COMMAND DATA (Hexadecimal) 1 2 01 Power k a 00H to 01H 02 Input Select x b See '02. Input Select' 03 Ratio k c See '03. Ratio' 04 Picture Mode d x See '04. Picture Mode' 05 Contrast k g 00H to 64H 06 Brightness k h 00H to 64H 07 ...
Page 37 - Transmission / Receiving Protocol; Transmission
37 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1] : Identifies between the factory setting and the user setting modes.* [Command2] : Controls monitor sets.* [Set ID] : Used for selecting a set you ...
Page 45 - Declaration of Conformity; Englewood Cliffs NJ 07632
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL Temporary nois...
