Page 2 - ENG; ENGLISH; CONTENTS
2 ENG ENGLISH TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPAR- ING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 5 - Detaching the Stand Base 6 - Mounting on a table 6 - Using the cable holder 8 - Mounting on a wall 9 USING THE MONITOR SET 9 Connecting ...
Page 3 - ASSEMBLING AND PREPARING; Unpacking; CAUTION; Stand Body
3 ENG ENGLISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessori...
Page 4 - Parts and buttons; Power Indicator
4 ENG ENGLISH ASSEMBLING AND PREPARING Parts and buttons Power Indicator Lighting On: Turned on Button (See p.11) (Power Button) Connection panel (See p.9) 19EN43S 20EN43S 22EN43S 23EN43S 19EN43T 20EN43T 22EN43T 23EN43T 24EN43T
Page 5 - Setting up the Monitor set; Attaching the Stand Base; Detaching the Stand Base
5 ENG ENGLISH ASSEMBLING AND PREPARING Attach the Stand Body to the monitor set. Attach the Stand Base . Tighten the screw to the right with a coin. Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Lay a foam mat o...
Page 6 - Mounting on a table; Using the cable holder; or
6 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (Power) but...
Page 7 - NOTE
7 ENG ENGLISH ASSEMBLING AND PREPARING Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensing...
Page 8 - Mounting on a wall
8 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation andSetup Guide. If you intend to mount the Monit...
Page 9 - USING THE MONITOR SET; Connecting to a PC; Mac adapter
9 ENG ENGLISH USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC y Your Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits analog...
Page 10 - Self Image Setting
10 ENG ENGLISH USING THE MONITOR SET y When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/DVI-D) respectively in Monitor set. y If you turn the Monitor set on while it is cold, the screen may flicker. This is normal. y Some red, green, or blue spots may appear on the s...
Page 11 - CUSTOMIZING SETTINGS; Exit; Monitor set Buttons
11 ENG ENGLISH CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Sele...
Page 12 - Customizing Settings; Menu Settings
12 ENG ENGLISH CUSTOMIZING SETTINGS Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the Ż or Ź or ź buttons. 3 Select the " Next Menu " button to enter the more option settings. 4 Select Exit to le...
Page 13 - Picture
13 ENG ENGLISH CUSTOMIZING SETTINGS Picture 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Enter to Picture by pressing the ź button. 4 Set the options by pressing the Ż or Ź or ź buttons. 5...
Page 14 - Color
14 ENG ENGLISH CUSTOMIZING SETTINGS Color 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Color by pressing the Ź button. 4 Enter to Color by pressing the ź button. 5 Set the options b...
Page 15 - Display
15 ENG ENGLISH CUSTOMIZING SETTINGS Display 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Display by pressing the Ź button. 4 Enter to Display by pressing the ź button. 5 Set the opt...
Page 16 - Others
16 ENG ENGLISH CUSTOMIZING SETTINGS Others 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Others by pressing the Ź button. 4 Enter to Others by pressing the ź button. 5 Set the option...
Page 17 - MY KEY Setting
17 ENG ENGLISH CUSTOMIZING SETTINGS MY KEY Setting 1 Press MY KEY button on the bottom of the Monitor set to display the MY KEY OSD. 2 Set the options by pressing the Ż or Ź or ź buttons. 3 Select Exit to leave the OSD menu. MY KEY Description MY KEY Setting MY KEY is short key. You can select one o...
Page 18 - Picture Mode
18 ENG ENGLISH CUSTOMIZING SETTINGS FUNC. Setting Picture Mode 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Enter to Picture Mode by pressing the ź button. 3 Set the options by pressing the Ż or Ź buttons. 4 Select Exit to leave the OSD menu.To return to the uppe...
Page 20 - DUAL WEB
20 ENG ENGLISH CUSTOMIZING SETTINGS NOTE y When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD appear and user should press dual button -> User can bring back to normal mode. DUAL DISPLAY 1 Press FUNC. button on the bottom of the Monitor set to display ...
Page 22 - TROUBLESHOOTING; Check the following before calling for service.; AUTO
22 ENG ENGLISH SPECIFICATIONS TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? y Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? y Press the Power button. Is the po...
Page 23 - Control Panel
23 ENG ENGLISH SPECIFICATIONS Display image is incorrect The screen color is mono or abnormal. y Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. y Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (tru...
Page 34 - Indicator
3 4 ENG ENGLISH SPECIFICATIONS Preset Modes (Resolution) ENG ENGLISH 22EN43S/22EN43T/23EN43S/23EN43T/24EN43T Horizontal Vertical Display Modes (Resolution) Polarity(H/V) Frequency(kHz) Frequency(Hz) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x...
Page 35 - Proper posture for using the Monitor set.; PROPER POSTURE
35 ENG ENGLISH PROPER POSTURE Proper posture for using the Monitor set. PROPER POSTURE Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the...
Page 36 - *above information is only for USA FCC Regulatory; Declaration of Conformity
Make sure to read the Safety Precautions before using the product.Keep the Owner’s Manual (CD) in an accessible place for future reference.The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. As an ENERGY STAR Partner LG...
