Page 2 - ENG; ENGLISH; CONTENTS
2 ENG ENGLISH TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPAR- ING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 5 - Detaching the stand base 6 - Detaching the stand body 6 - Using the cable holder 7 - Mounting on a table 7 - Adjusting the angle 8 - Adj...
Page 3 - ASSEMBLING AND PREPARING; Unpacking; CAUTION; Stand Base; One Screw
3 ENG ENGLISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessori...
Page 4 - Parts and buttons; Power Indicator
4 ENG ENGLISH ASSEMBLING AND PREPARING Parts and buttons (Power Button) Power Indicator y y LED On : Power is on y y LED Off: Power is off Front Side Buttons Input Connectors (See p.11 to 12) See p.11 to 12) to 12) 12))
Page 5 - Setting up the Monitor set; Attaching the Stand Base; Detaching the stand base; stand base
5 ENG ENGLISH ASSEMBLING AND PREPARING Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Stand Base Stand Body Stand Base Stand Body y y To protect the screen from scratches, cover the surface with a soft cloth. 3 U...
Page 6 - Detaching the stand body; NOTE
6 ENG ENGLISH ASSEMBLING AND PREPARING Detaching the stand body 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver, remove the four screws and detach the stand from the monitor. Using the cable holder Fix the Knob ...
Page 7 - Mounting on a table; WARNING; Front Side
7 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift the monitor and place it on the table in an upright position.Install at least 10 cm away from the wall to ensure sufficient ventilation. 10 cm 10 cm 10 cm 10 cm Adjusting the angle 1 Place the monitor mounted on the stand base in an u...
Page 8 - Using the Kensington locking; Adjusting the stand height
8 ENG ENGLISH ASSEMBLING AND PREPARING Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor.For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect t...
Page 9 - Swivel stand; Using the Pivot function; Head
9 ENG ENGLISH ASSEMBLING AND PREPARING Swivel stand y y Image shown may differ from your Monitor set. 1 Swivel 355 degrees and adjust the angle of the Monitor set to suit your view. 1 Lift the monitor to its highest height to utilize the Pivot function. Using the Pivot function The pivot function al...
Page 10 - Mounting on a wall
10 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation andSetup Guide. If you intend to mount the Moni...
Page 11 - USING THE MONITOR SET; Connecting to a PC; Mac adapter
11 ENG ENGLISH USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC y y Your Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits ana...
Page 12 - Self Image Setting
12 ENG ENGLISH USING THE MONITOR SET y y When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/DVI-D) respectively in Monitor set. y y If you turn the Monitor set on while it is cold, the screen may flicker. This is normal. y y Some red, green, or blue spots may appear on...
Page 13 - CUSTOMIZING SETTINGS; EXIT; Monitor set Buttons
13 ENG ENGLISH CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Sele...
Page 14 - Customizing Settings; Menu Settings; MENU; Next Menu
14 ENG ENGLISH CUSTOMIZING SETTINGS Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the " Next Menu " button to enter the more option settings. 4 Select EXIT to le...
Page 15 - Picture
15 ENG ENGLISH CUSTOMIZING SETTINGS Picture 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Sele...
Page 16 - Color
16 ENG ENGLISH CUSTOMIZING SETTINGS Color 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Color by pressing the ► button. 4 Enter to Color by pressing the ▼ button. 5 Set the options b...
Page 17 - Display
17 ENG ENGLISH CUSTOMIZING SETTINGS Display 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Display by pressing the ► button. 4 Enter to Display by pressing the ▼ button. 5 Set the opt...
Page 18 - Others
18 ENG ENGLISH CUSTOMIZING SETTINGS Others 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Others by pressing the ► button. 4 Enter to Others by pressing the ▼ button. 5 Set the option...
Page 19 - READER SETTING; READER
19 ENG ENGLISH CUSTOMIZING SETTINGS READER SETTING 1 Press READER button on the bottom of the Monitor set to display the Reader Mode OSD. 2 Set the options by pressing the ◄ buttons. Reader Mode Description Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want ...
Page 20 - SMART ENERGY SAVING
20 ENG ENGLISH CUSTOMIZING SETTINGS SMART ENERGY SAVING SETTING 1 Press button on the bottom of the Monitor set to display the SMART ENERGY SAVING OSD. 2 Set the options by pressing the ► buttons. Each option is explained below. SMART ENERGY SAVING Description High Enables SMART ENERGY SAVING you ca...
Page 21 - TROUBLESHOOTING; Check the following before calling for service.; AUTO
21 ENG ENGLISH TROUBLESHOOTING TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? y Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? y Press the Power button. Is the p...
Page 22 - Control Panel; Control Panel ► Display ► Settings
22 ENG ENGLISH TROUBLESHOOTING Display image is incorrect The screen color is mono or abnormal. y Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. y Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (tr...
Page 23 - SPECIFICATIONS
23 ENG ENGLISH SPECIFICATIONS SPECIFICATIONS Display Screen Type 55.8 cm (22 inch) Flat Panel Active matrix-TFT LCDAnti- Glare coating Visible diagonal size: 55.8 cm Pixel Pitch 0.282 mm x 0.282 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to ...
Page 24 - Indicator
24 ENG ENGLISH SPECIFICATIONS Preset Modes (Resolution) Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 76...
Page 25 - Proper posture for using the Monitor set.; PROPER POSTURE
25 ENG ENGLISH PROPER POSTURE Proper posture for using the Monitor set. PROPER POSTURE Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the...
Page 26 - Declaration of Conformity
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. As an ENERGY STAR Partner ...
