Page 2 - ENG; English; TABLE OF CONTENTS
2 ENG English Table of Contents TABLE OF CONTENTS 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 5 Lifting and moving the Monitor 5 Setting Up the Monitor set 5 - Attaching the Stand Base 6 - Mounting on a table 6 - Adjusting the angle 7 - Adjusting the stand height 7 - Using the Kensing...
Page 3 - ASSEMBLING AND PREPARING; Unpacking; CAUTION
3 ENG English ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look...
Page 4 - Parts and buttons
4 ENG English ASSEMBLING AND PREPARING Parts and buttons Power Indicator y LED On : Power is on y LED Off: Power is off Front Side Buttons Input Connectors (See p.12 to 15) (Power Button) Input Connectors (See p.15 ) 1 1
Page 5 - Setting Up the Monitor set; Attaching the Stand Base; Lifting and moving the
5 ENG English ASSEMBLING AND PREPARING Setting Up the Monitor set Attaching the Stand Base 1 Place the monitor's screen face down. y To protect the screen from scratches, cover the surface with a soft cloth. 3 Using a coin, turn the screw clockwise to se- cure the stand base. 2 Check the position (a...
Page 6 - Adjusting the angle; WARNING; Mounting on a table
6 ENG English ASSEMBLING AND PREPARING Adjusting the angle 1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 15° backwards for a comfortable viewing experience. y To avoid injury to th...
Page 7 - Using the Kensington locking; NOTE; Adjusting the stand height
7 ENG English ASSEMBLING AND PREPARING Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor.For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect t...
Page 8 - Detaching the stand body
8 ENG English ASSEMBLING AND PREPARING Detaching the stand body 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver, remove the four screws and detach the stand from the monitor. y The components appearing in the il...
Page 9 - Swivel stand; Using the Pivot function
9 ENG English ASSEMBLING AND PREPARING Swivel stand y Image shown may differ from your Monitor set. 1 Swivel 90 degrees and adjust the angle of the Monitor set to suit your view. 1 Lift the monitor to its highest height to utilize the Pivot function. Using the Pivot function The pivot function allow...
Page 10 - Mounting on a wall
10 ENG English ASSEMBLING AND PREPARING 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will n...
Page 12 - USING THE MONITOR SET; Connecting Input Signal Cable
12 ENG English USING THE MONITOR SET USING THE MONITOR SET Connecting Input Signal Cable y This monitor supports the *Plug and Play feature.*Plug and Play: A feature that allows you to add a device to your computer, without having to reconfigure anything or install any manual drivers. D-SUB IN conne...
Page 13 - DVI connection
13 ENG English USING THE MONITOR SET DVI connection Transfers digital video signals from the Cloud Mon-itor to an extended monitor.Connect the Cloud Monitor to an extended monitor using a DVI cable. y To connect the monitor to a computer, use the appropriate signal cable (LAN and D-SUB). y A convert...
Page 14 - Connecting LAN/Peripherals; LAN connection
14 ENG English USING THE MONITOR SET Connecting LAN/Peripherals LAN connection Connect the router or switch to the monitor using a LAN cable as illustrated below. y The LAN cable is sold separately. y The following LAN cable type can be used: Standard: IEEE 802.3 ETHERNET y If a device is connected ...
Page 15 - Peripheral device connection
15 ENG English USING THE MONITOR SET y Peripheral devices are sold separately. y The USB ports on the left and bottom of the monitor can be used to connect the key-board, mouse, and other USB devices. y Cables with angled plugs may have clear-ance issues, use straight plugs when pos-sible. Angle Typ...
Page 16 - Self Image Adjustment
16 ENG English USING THE MONITOR SET y What is "Self Image Adjustment"? This func-tion runs when the monitor is connected for the first time and performs automatic image adjustment for each signal (only available for analog [D-SUB input] signals) to provide an optimal screen display. Self Im...
Page 17 - CUSTOMIZING SETTINGS
17 ENG English CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Sele...
Page 18 - Customizing Settings; Menu Settings
18 ENG English CUSTOMIZING SETTINGS Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the " NEXT MENU " button to enter the more option settings. 4 Select EXIT to le...
Page 19 - PICTURE
19 ENG English CUSTOMIZING SETTINGS PICTURE 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Enter to PICTURE by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Sele...
Page 20 - COLOR
20 ENG English CUSTOMIZING SETTINGS COLOR 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select COLOR by pressing the ► button. 4 Enter to COLOR by pressing the ▼ button. 5 Set the options b...
Page 21 - DISPLAY
21 ENG English CUSTOMIZING SETTINGS DISPLAY 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select DISPLAY by pressing the ► button. 4 Enter to DISPLAY by pressing the ▼ button. 5 Set the opt...
Page 22 - OTHERS
22 ENG English CUSTOMIZING SETTINGS OTHERS 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select OTHERS by pressing the ► button. 4 Enter to OTHERS by pressing the ▼ button. 5 Set the option...
Page 23 - VOLUME
23 ENG English CUSTOMIZING SETTINGS VOLUME 1 Press the VOL button at the bottom of the monitor to display the VOL OSD menu. 2 Press the ◄ or ► button to adjust the volume. 3 Press the button to enable or disable Mute. 4 Select EXIT to leave the OSD menu. Each option is explained below. MENU > NEX...
Page 24 - TROUBLESHOOTING
24 ENG English Troubleshooting TROUBLESHOOTING Nothing is displayed on the screen Is the monitor's power cord plugged in? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator. Is the power indicator displaying as red? y Adjust the br...
Page 26 - PRODUCT SPECIFICATION
26 ENG English Product Specification PRODUCT SPECIFICATION LCD Screen Type 48.1 cm (19 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) ScreenDiagonal length of the screen: 48.1 cm Pixel Pitch 0.2835 mm x 0.2835 mm Resolution Maximum Resolution 1440 x 900 @ 60 Hz Recommended Resolution ...
Page 27 - Preset Mode
27 ENG English Product Specification Preset Mode 19CNT42K Display Modes (Resolution) Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remark 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1440 x 900 55.935 59.888 -/+ Recomm...
Page 28 - PROPER POSTURE; Proper posture for using the monitor
28 ENG English Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. y Using the monitor for a prolonged period of time can cause eye fatigue. Take a 10-minute break every hour. y The stand is designed to best support...
Page 29 - USING THE CITRIX CLOUD MONITOR; Initial Screen
29 ENG English USING CITRIX CLOUD MONITOR USING THE CITRIX CLOUD MONITOR Initial Screen After power on, restart or factory reset, the LG logo is displayed as shown below. [Log in Window] Enter user name, password and domain to con-nect to the VDI server. y Network status: If a network connection is ...
Page 31 - Application Screen
31 ENG English USING CITRIX CLOUD MONITOR Application Screen If there is only one virtual OS for the user account, the system is connected to the OS directly. If there is more than one OS, the following screen appears. [1] Home y After logging in, the Home tab is displayed on the screen. The applica...
Page 32 - Setting Button; Power Button
32 ENG English USING CITRIX CLOUD MONITOR Setting Button With this button, you can set the network, server and language for the Cloud monitor. [Language Setting] You can set the language used in the Log in window screen of the Cloud monitor. After setting the language, click the "OK" button....
Page 33 - VDI Server Setting
33 ENG English USING CITRIX CLOUD MONITOR [Server Setting] Go to Setting > Server to set the VDI server and eZ-CMS server addresses for Citrix. eZ-CMS is a software program for managing the cloud products provided by LG Electronics. VDI Server Setting y Enter the VDI server address you want to ac...
Page 34 - Primary Display Setting
34 ENG English USING CITRIX CLOUD MONITOR eZ-CMS Setting y Enter the eZ-CMS server address to connect to the management software. [Display Setting] You can set the display mode of the cloud monitor. Primary Display Setting y Resolution: sets the resolution of the monitor. 19CNT42K: the Cloud monitor...
Page 35 - Secondary Display Setting
35 ENG English USING CITRIX CLOUD MONITOR Secondary Display Setting y Resolution: sets the resolution of the monitor. The following options are available for the reso-lution supported by the DVI monitor. If it is set to "Auto", the resolution is set to the optimal resolution. y Rotation: set...
Page 37 - Info Button
37 ENG English USING CITRIX CLOUD MONITOR Info Button Press the "Info" item to display the pop-up window for the system information. [General Tab] This tab shows hardware information, software information and Wake on LAN. y Hardware Information: shows the device model (Displayed as 19CNT42K)...
Page 38 - Pop-up Message Linked to
38 ENG English USING CITRIX CLOUD MONITOR [Ping Tab] On the Ping tab, you check the network connection to a specific IP address or host from a local client as well as local network status. y Only the IP address or host name can be en-tered; other options for Ping cannot be used. y If you select the ...
Page 40 - Declaration of Conformity
MODEL SERIAL Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. As an ENERGY ...
