Lexmark X85X - Manual
Lexmark X85X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Copying; Making a copy
- Page 4 – Faxing; Sending a fax; Printing; Printing a document
- Page 5 – Maintaining the printer; Cleaning the scanner glass
Lexmark™ X85x
Quick Reference
Loading paper and
specialty media
Loading standard or optional 500-
sheet trays
1
Pull out the tray.
2
Squeeze the side guide tab, and slide the guide
to the outside of the tray.
3
Squeeze the front guide tab, and slide the guide
to the correct position for the media size you are
loading.
4
Flex the sheets back and forth to loosen them,
then fan them. Do not fold or crease the print
media. Straighten the edges on a level surface.
5
Load print media in the tray with the print side
up.
6
Squeeze the side guide tab, and slide the guide
until it lightly rests against the edge of the
media.
7
Insert the tray.
Loading the multipurpose feeder
1
Lower the multipurpose feeder.
2
Pull the tray extension out.
Note:
Do not
place objects on the
multipurpose feeder. Also, avoid
pressing down or applying
excessive force on it.
3
Slide the width guides to the outside of the
feeder.
4
Flex the sheets or envelopes back and for th to
loosen them, then fan them. Do not fold or
crease the print media. Straighten the edges on
a level surface.
5
Load the media in the feeder.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface. 4 Load print media in the tray with the print side down. • Place pre-punched paper with the holes toward the left side of the tray. • Place letterhead (or t...
1 Place your original document in the ADF face up. Labels on the ADF show how to load the paper based on its size. 2 Adjust the paper guides. 3 Touch Copy on the home screen. 4 Touch Copy From , and then touch Mixed Sizes . 5 Touch Copy To , and then touch Auto Size Match . 6 Touch Copy It . The sca...
Printing from a USB flash memory device 1 Make sure the MFP is on and Ready or Busy appears. 2 Insert a USB flash memory device into the USB Direct interface. Note: If you insert the memory device when the MFP requires attention such as when a paper jam has occurred, the MFP ignores the memory devic...
