Page 5 - Introduction; Overview; Understanding letters after model numbers
Introduction Overview This edition of the Technical Reference contains information about the following printers or multifunction printers (MFPs): C540nC543dnC544nC544dnC544dwC544dtnX546dtn Understanding letters after model numbers Some Lexmark printers may have one or more letters after the model na...
Page 7 - Learning about the printer; Finding information about the printer
Learning about the printer Finding information about the printer Setup information Description Where to find The Setup information gives you instructions for setting up the printer. Follow the set of instructions for local,network, or wireless, depending on what you need. You can find the Setup info...
Page 8 - Printer Control Language (PCL) page formatting; Printable areas
Printer Control Language (PCL) page formatting For more information on PCL, refer to the Printer Languages and Interfaces Technical Reference . It contains a complete listing with descriptions of PCL commands. To determine which PCL commands your printer supports, see “Appendix A: PCL support” on pa...
Page 9 - Supported paper and envelope dimensions
Supported paper and envelope dimensions The following table lists the page sizes and print area dimensions for all supported paper and envelope sizes. For moreinformation about the printable areas and logical pages for PCL emulation, see “Printable areas” on page 8. Selection Paper/envelopedimension...
Page 11 - PJL commands information
Printer Job Language (PJL) PJL commands information Your printer supports complete PJL commands, including certain commands that cause the printer to enter PCLemulation, PostScript emulation, and Personal Printer Data Stream (PPDS). For a complete listing with descriptions of PJL commands, see the P...
Page 12 - Paper sizes supported
PostScript (PS) emulation Your printer supports complete PostScript emulation supplemental operators. For full descriptions in detail for theseoperators, refer to the PostScript emulation chapter in the Printer Languages and Interfaces Technical Reference. To determine which commands your printer su...
Page 13 - PostScript paper tray support
PostScript paper tray support When the printer receives one of the operators listed in “Tray selected with tray operators” on page 13, it performsthe actions listed as follows. This paper tray selection process ends as soon as a suitable paper source is chosen andpaper is fed from this tray. • The p...
Page 14 - PostScript envelope size support
= Supported X = Not supported Printer models Operator Tray selected (corresponding image size is set) C540n, C543dn, C544n/dn/dw/dtn X546dtn MFP foliotray tray with folio-size paper ledgertray tray with 279.4 x 431.8-mm (11 x 17-in.) paper withlandscape orientation X X legaltray tray with legal-size...
Page 15 - PostScript envelope tray support
= Supported X = Not supportedEnvelope sizes Printer models Size name Literal name Size (mm) Size (inches) Size (points) C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP otherenvelope Other 296.93 x 427.48 11.69 x 16.83 841 x 842 X X Literal names supported = Supported X = Not Supported Literal names Printe...
Page 17 - Printer specifications; Airflow requirement; Noise emission levels
Printer specifications This chapter lists printer specifications and information about hardware, environmental conditions, and powerrequirements. Airflow requirement The room should meet ASHRAE 62—1989 standards. Noise emission levels The following measurements were made in accordance with ISO 7779 ...
Page 18 - Electrical specifications; Power requirements
Electrical specifications Printer model Electrical specification C54x low voltage models* 100–127 V at 47–63 Hz, nominal 90–137 V, extreme C54x 100 volt model 100 V at 47–63 Hz, nominal 90–110 V, extreme C54x high voltage models 220–240 V at 47–63 Hz (not available in all countries)198–259 V, extrem...
Page 19 - Physical specifications
Lexmark X546dtn MFP nominal average power requirements Printing states X546dtn Printing continuously (simplex) 540 W Printing continuously (duplex) 370 W Copying continuously 510 W Scanning 60 W Average power while idle Power Saver Mode/Sleep Mode Standby Mode 23 W 50 W Max (Average) current while p...
Page 20 - Altitude specifications and atmospheric pressure; Altitude specifications
Clearance requirements Lexmark C540n, C543dn, C544n/dn/dw/dtn Model Left side Right side Front Rear Top C540n, C543dn, C544n, C544dn,C544dw 76.2 mm (3 in.) 152.4 mm (6 in.) 508 mm (20 in.) 101.6 mm (4 in.) 254 mm (10 in.) C544dtn 76.2 mm (3 in.) 254 mm (10 in.) 508 mm (20 in.) 101.6 mm (4 in.) 254 m...
Page 21 - Atmospheric Pressure
Atmospheric Pressure 74.6 kPa Printer specifications 21
Page 22 - Appendix A: PCL support; PCL emulation commands
Appendix A: PCL support PCL emulation commands = Supported X = Not supported Printer model Command Function C540n, C543dn, C544n,C544dn,C544dw,C544dtn X546dtn Decimal 8 BS, Backspace Decimal 9 HT, Horizontal Tab Decimal 10 LF, Line Feed Decimal 12 FF, Form Feed Decimal 13 CR, Carrier Return Decimal ...
Page 32 - Appendix B: PJL support; Common variables for both printer languages
Appendix B: PJL support Common variables for both printer languages = Supported X = Not supported Printer model Variable name C540n, C543n,C544n/dn/dw/dtn X546dtn MFP AUTOCONT AUTOSELECT X X BINDING BITSPERPIXEL X X CLEARABLEWARNINGS CONTEXTSWITCH X X COPIES CPLOCK DENSITY DISKLOCK X X DUPLEX ECONOM...
Page 34 - Lexmark-unique PJL variables for both printer languages
= Supported X = Not supported Printer model Variable name C540n, C543n,C544n/dn/dw/dtn X546dtn MFP RESOLUTION RESOURCESAVE RESOURCESAVESIZE X X RET X X STRINGCODESET TIMEOUT USERNAME X X WIDEA4 Lexmark-unique PJL variables for both printer languages = Supported X = Not supported Printer model Variab...
Page 44 - PJL messages for auto-continuable conditions
PJL messages for auto-continuable conditions = Supported X = Not supported Printer model Message Status code Return string C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP Intervention Required - PPDS Font Error 30014 50 PPDS Font Error Intervention Required - Insufficient CollationArea 30016 37 Insufficie...
Page 50 - PJL messages for attendance conditions
= Supported X = Not supported Printer model Message Status code Return string C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP Intervention Required - Scheduled Maintenance 35075 80 Scheduled Maintenance X X Intervention Required - Scheduled Maintenance 35075 81 Scheduled Maintenance X X Intervention Requi...
Page 66 - PJL messages for paper handling
PJL messages for paper handling = Supported X = Not supported Printer model Message Status code Return string C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP Intervention Required - Tray <x> Empty 11xyy Tray <source #> Empty X X Intervention Required - Tray <x> Missing 12x01 Tray <sou...
Page 69 - PJL messages for paper jams
= Supported X = Not supported Printer model Message Status code Return string C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP Intervention Required - Incorrect Media 41xyy 34 Incorrect Media X X Intervention Required - Insert Duplex Pages &Press Go. 412yy Insert Duplex Pages & Press Go. X X Interv...
Page 77 - File and device protection commands
= Supported X = Not supported Printer model Command C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP LFAX PHONENUMBER X LFORMAT LINITIALIZEPRINTER LOPENFILE LPORTROTATE LPRINT testpage LPRINTDIRECTORY LPRINTMENUS LPRINTPCLFONTS LPRINTPSFONTS LPRINTTESTPAGE LPRINTDIAG1TEST LPRINTDIAG2TEST LPRINTDIAG3TEST LR...
Page 79 - Appendix C: PostScript support; Supplemental operators
Appendix C: PostScript support Supplemental operators = Supported X = Not supported Printer model Operator name C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP appletalktype buildtime byteorder checkpassword currentfilenameextend currentmanualduplexmode currentuniversalsize defaulttimeouts deletefile devc...
Page 82 - Page device parameters
= Supported X = Not supported Printer model Operator name C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP setmanualduplexmode setpapertray setprintername setquiet setresolution setsccbatch setsccinteractive setsoftwareiomode settumble setuniversalsize setuserdiskpercent softwareiomode tumble userdiskperce...
Page 86 - User interpreter parameters
= Supported X = Not supported Printer model Key C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP ProcessColorModel X X Punch X X SlipSheet X X SlipSheetDetails • SlipSheetSource • Type Staple X X TraySwitch Tumble UniversalDetails User interpreter parameters = Supported X = Not supported Printer model Key ...
Page 87 - System interpreter parameters
= Supported X = Not supported Printer model Key Default C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP MaxOpStack 100000 MaxPatternItem 20000 MaxScreenItem 48000 MaxSuperScreen 1024 MaxUPathItem 5000 MinFontCompress 2147483647 PageCount 0 UseOldcopypage false VMReclaim 0 VMThreshold 25000 per MB of RAM W...
Page 90 - Devices supported
Devices supported = Supported X = Not supported Printer model Device C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP %AppSocketA% %AppSocketB% %AppSocketC% %AppSocketD% %EthernetPhysicalA% %EthernetPhysicalB% %EthernetPhysicalC% %EthernetPhysicalD% %EtherTalkA% %EtherTalkB% %EtherTalkC% %EtherTalkD% %IP_A...
Page 92 - Device parameters
= Supported X = Not supported Printer model Device C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP %TokenTalkB% X X %TokenTalkC% X X %TokenTalkD% X X %USB_A% %USB_B% %USB_C% %USB_D% Device parameters = Supported X = Not supported Printer model Key C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP Device Parameter...
Page 101 - PostScript message keys commands
PostScript message keys commands = Supported X = Not supported Printer model Key C540n, C543dn,C544n/dn/dw/dtn X546dtn MFP job status source Appendix C: PostScript support 101
Page 102 - Index
Index A air temperature ranges 20airflow requirement 17altitude specifications 20atmospheric pressure 21 C clearance requirements 20commands PJL, file and device protection 77PJL, Lexmark-unique 76PostScript, message keys 101 commands supported GL/2 28PCL emulation 22PJL, common variables for both l...