Lexmark N4000e - Manual - manualsarea.com

Page 2 - Contents

Contents 2 Contents Chapter 1: Introduction ................................................................. 6 Chapter 2: Setup ............................................................................ 7 Requirements ..................................................................................

Page 6 - Introduction

Introduction 6 1 Introduction Thank you for purchasing the Lexmark TM N4000e Print Server, the solution to all your printer sharing needs! The print server makes it easy for you to: • Share your printer between two or more network computers. • Locate your printer anywhere in your home or office. You...

Page 7 - Setup; Requirements

Setup 7 2 Setup Requirements For setup, you need: • The Lexmark N4000e Print Server • An existing Ethernet (10/100 Base TX) network • An Ethernet (RJ-45, category 5) cable, purchased separately • A network-capable printer To find out if your printer is network-capable or for other printer-specific i...

Page 8 - Connecting the hardware; Understanding the print server indicator lights; Understanding the Setup Utility software

Connecting the hardware 8 Connecting the hardware Follow all of the steps on the Setup Sheet that came with your print server. Understanding the print server indicator lights Power ( ): This light indicates that the print server power supply is properly connected. USB ( ): This light indicates the p...

Page 12 - Troubleshooting; The Power or USB indicator light is not on

Troubleshooting 12 3 Troubleshooting Use this section to solve problems you may have while setting up your print server. The Power or USB indicator light is not on Note: To locate the Power and USB indicator lights, see “Understanding the print server indicator lights.” The Status indicator light is...

Page 13 - An error message appears; I don’t know which print server to select

An error message appears 13 An error message appears The Lexmark N4000e Setup Utility CD does not auto launch 1 Close all open software programs. 2 Restart your computer. 3 Reinsert the Lexmark N4000e Setup Utility CD. If the setup utility screen appears, continue with step 11 on the Setup Sheet. If...

Page 14 - My print server is not shown in the list

My print server is not shown in the list 14 My print server is not shown in the list 1 Select My print server/printer is NOT shown in the list. 2 Make sure: • The power indicator light is on. • The print server is properly connected to the network (check the Ethernet cable). • There is not a problem...

Page 15 - My printer is not shown in the list (No Printer Attached); Click Next to search the network again.; My print server is unconfigured

My printer is not shown in the list (No Printer Attached) 15 My printer is not shown in the list (No Printer Attached) 1 Select My print server/printer is NOT shown in the list on the Print Server Setup screen. 2 Make sure: • The printer is turned on (check the power indicator light). • The printer ...

Page 16 - My network printer does not print

My network printer does not print 16 My network printer does not print • Make sure all cables to the printer, print server, electrical outlet, and network connection are secure. • Make sure the Power and USB indicator lights are on and the Status indicator light is off. • Check the printer status. •...

Page 18 - Uninstall the Lexmark N4000e Setup Utility software; Windows XP and Windows 2003 server; installed printers or fax printers.

Uninstall the Lexmark N4000e Setup Utility software 18 Uninstall the Lexmark N4000e Setup Utility software 1 From the Start menu, click Programs or All Programs → Lexmark → N4000e → N4000e Software Uninstall. 2 Follow the instructions on your screen. Check the printer status 1 From the Start menu, c...

Page 19 - Determine if my print server is configured

Determine if my print server is configured 19 Determine if my print server is configured When you run the Setup Utility software, a list of all print servers found on your network appear on the screen. Your print server is configured if it appears in the list with its MAC address appended to the pri...

Page 20 - Change the print server network settings; Contact Lexmark

Change the print server network settings 20 Change the print server network settings Once the IP address is assigned, you can access the homepage on the Web to remotely view and manage the network printer. Functions include viewing printer status, resetting the print server, changing settings, and s...

Page 21 - Glossary

Glossary 21 5 Glossary DHCP. Dynamic Host Configuration Protocol, a protocol for assigning dynamic IP addresses to devices on a network. With dynamic addressing, a device can have a different IP address every time it connects to the network. This means that a new device can be added to a network wit...

Lexmark N4000e - Manual

Table of Contents:

Summary

Other Lexmark Models