Lexmark 16M1842 - Manual
Lexmark 16M1842 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Loading the 2000-sheet tray
- Page 3 – Loading the multipurpose
- Page 4 – Copying
- Page 5 – Example 1: Copying to mixed paper; Copying on both sides of the
- Page 6 – Faxing; Sending a fax using the printer; Printing; Printing a document; For Windows users; For Macintosh users; Printing confidential and other; Holding jobs in the printer; Printing confidential and other held
- Page 7 – Printing from a flash drive; Canceling a print job from the; Maintaining the printer; Cleaning the exterior of the
- Page 8 – Cleaning the scanner glass
Lexmark™ X65x
Quick Reference
Loading paper and
specialty media
Loading the standard or
optional 250-sheet or 550-sheet
tray
Although the 250-sheet tray and the 550-sheet tray are different
in appearance, they require the same process for loading paper.
Use these instructions to load paper in either tray:
1
Pull the tray out.
Note: Do not remove trays while a job prints or while
Busy
appears on the display. Doing so may cause a jam.
2
Squeeze the width guide tab inward as shown, and move the
width guide to the correct position for the paper size being
loaded.
3
Unlock the length guide, squeeze the length guide tab inward
as shown, and slide the guide to the correct position for the
paper size being loaded.
Notes:
•
Use the size indicators on the bottom of the tray to help
position the guides.
•
For standard paper sizes, lock the length guide.
4
Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges on
a level surface.
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5 Load the paper stack: • Print side facedown for single-sided printing • Print side faceup for duplex printing Note: Paper must be loaded differently in the trays if anoptional StapleSmart TM II Finisher is installed. For more information, see the User's Guide . Note: Notice the maximum fill line o...
4 Push the length guide release latch to raise the length guide, slide the guide to the correct position for the paper size being loaded, and then lock the guide. 5 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surf...
3 Slide the width guide to the far right. 4 Flex the sheets of paper or specialty media back and forth to loosen them, and then fan them. Do not fold or crease them. Straighten the edges on a level surface. 5 Load the paper or specialty media. Slide the stack gently into the multipurpose feeder unti...
