Lexmark 10N0217 - Manual
Lexmark 10N0217 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Refill Instructions -
Lexmark 10N0217 (No.17)
Lexmark All in One X72 . X74 . X75 . X1130 . X1150 . X1180
. X225
Color Jetprinter Z13 . Z23 . Z25 . Z33 . Z34 . Z35 . Z515 .
Z601 . Z605 . Z615
Instructions
1.
2.
Remove the top from the black ink bottle and using
the syringe remove 10ml of black ink
(g.3)
3.
4.
Insert the steel filling tube into the appropriate filling
holes.
(g.5)
. Push down into centre of the sponge.
IMPORTANT:
Cartridge contains a sponge and a
slight resistant may be felt.
5.
Inject ink. When ink overflows from filling
hole or starts to leak from print heads cartridge is full.
Stop injecting immediately
.
Blot printer heads with tissue before continuing to fill
next colour
.
IMPORTANT:
Clean syringe with water and dry
before refilling next colour
.
6.
After refilling replace label back over filling hole.
7.
Leave the cartridge to stand overnight on non-
absorbent surface this will ensure no
leakage and give the ink time to fully saturate the
sponge.
IMPORTANT: DO NOT LEAVE ON TISSUE.
8.
Install cartridge and run a priming cycle.
PLEASE NOTE:
The ink indicator level may need to
be turned off. Check your HP instructions manual for
details.
Assemble syringe and steel filling tube and fill with
appropriate colour ink.
(g.2)
The filler hole is located on top of the cartridge.
(g.4)
SLOWLY
Items Required
Original Lexmark 17 Cartridge, Syringe & Filling
Tube
Black Ink 10ml
fig.2
fig.3
fig.4
fig.5
fig.1
Black
Refilling
Hole
Order your
Refill PACKs at:
www.
.com
refill
4
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
