Page 3 - User
ThinkServer TD100 and TD100x Types 4203, 4204, 4205, 4206, 6398, 6399, 6419, and 6429 User Guide
Page 5 - Contents; iii
Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Chapter 1. The ThinkServer TD100 and TD100x server . . . . . . . . . 1 Related documentation . . . . . . . . . . . . . . . . . . . . . . 1 Notices and statements in this document . . . . . . . . . . . . . . . . 2 ThinkServer T...
Page 6 - iv
Using the Configuration/Setup Utility program . . . . . . . . . . . . . 61 Starting the Configuration/Setup Utility program . . . . . . . . . . . . 61 Configuration/Setup Utility menu choices . . . . . . . . . . . . . . 62 Using passwords . . . . . . . . . . . . . . . . . . . . . . . 66 Using the Bo...
Page 7 - Safety
Safety Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Lees voordat u dit produc...
Page 9 - vii
Statement 1: DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. v Connect all power cords to a ...
Page 10 - viii
Statement 2: CAUTION: When replacing the lithium battery, use only the battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not prope...
Page 11 - ix
Statement 3: CAUTION: When laser products (such as CD drives, DVD drives, fiber optic devices, or transmitters) are installed, note the following: v Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable part...
Page 13 - xi
Statement 8: CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a prob...
Page 14 - xii
Statement 15: CAUTION: Make sure that the rack is secured properly to avoid tipping when the server unit is extended. xii ThinkServer TD100 and TD100x Types 4203, 4204, 4205, 4206, 6398, 6399, 6419, and 6429: User Guide
Page 15 - Related
Chapter 1. The ThinkServer TD100 and TD100x server The Lenovo ® ThinkServer ™ TD100 and TD100x (Machine Types 4203, 4204, 4205, 4206, 6398, 6399, 6419, and 6429) is a 5-U-high, high-performance server. It is ideally suited for networking environments that require superior microprocessor performance,...
Page 29 - Server
Chapter 2. Installing optional devices Important: Before you install optional hardware, make sure that the server is working correctly. Start the server, and make sure that the operating system starts, if an operating system is installed, or that a 19990305 error code is displayed, indicating that a...
Page 32 - connectors; System
System-board optional-device connectors The following illustration shows the system-board connectors for user-installable options. 1 2 3 4 5 6 7 8 9 10 11 12 DIMM LEDs 1 DIMM connectors (6) 7 PCI 32 bit/33 MHz connector 2 Microprocessor 1 connector 8 PCI-X 64 bit/133 MHz connector 3 Microprocessor 2...
Page 34 - Installation
System board LEDs The following illustration shows the light-emitting diodes (LEDs) on the system board. 1 2 3 4 5 6 7 8 9 10 11 12 DIMM LEDs 1 Microprocessor error LED (2) 5 ServeRAID error LED 2 VRM error LED 6 PCI Error LED (6) 3 Battery LED 7 Microprocessor mismatch LED 4 BMC heartbeat LED 8 DIM...
Page 51 - IDs
c. Gently slide the drive assembly into the drive bay 3 until the drive stops. d. Push the drive tray handle to the closed (locked) position. e. Check the hard disk drive status indicator to make sure that the hard disk drive is operating correctly. (You might have to restart the server before the d...
Page 54 - Installing
The CD or DVD drive is attached to an ATA 100 signal cable. The blue connector is attached to the system board. The connector on the other end is attached to the master IDE device. The middle connector attaches to an optional optical device or tape drive. v Simple-swap SATA (TD100 models only): The ...
Page 83 - Notices
Appendix. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is no...
Page 93 - Index
Index A acoustical noise emissions 3 adapter hot-plug devices 50 installing 41 hot-plug 50 requirements 40 ServeRAID 50 ServeRAID-8k installing 51 specifications 3 advanced setup 63 attention notices 2 availability features 6 B backplane 37 baseboard management controller (BMC) 5 baseboard managemen...