Lenovo T440- User Manual

Read this first Be sure to follow the important tips given here to get the most use and enjoyment out of your computer.Failure to do so might lead to discomfort or injury, or cause your computer to fail. Protect yourself from the heat that your computer generates. When your computer is turned on or ...

Protect your computer and data when moving it. Before moving a computer equipped with a hard disk drive, do one of thefollowing, and make sure that the power button is off or is blinking: • Turn it off. • Put it in sleep mode. • Put it in hibernation mode. This will help to prevent damage to the com...

Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enoughthat the product should not be used again until it has been inspected and, if necessary, repaired byan authorized servicer. As with any electronic device, pay close att...

product are zero. Before you remove the covers from a product equipped with a power cord, always makesure that the power is turned off and that the product is unplugged from any power source. If you haveany questions or concerns, contact the Customer Support Center. Although there are no moving part...

To prevent possible overheating, do not cover the power adapter with clothing or other objectswhen the power adapter is plugged into an electrical outlet. Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you usea...

CAUTION:Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment ofthe equalizer to maximum increases the earphone and headphone output voltage and the soundpressure level. Therefore, to protect your hearing, adjust the equalizer to an appropriate level. Excessive us...

Chapter 1. Product overview This chapter provides information about the locations of connectors, locations of important product labels,computer features, specifications, operating environment, and preinstalled programs. • “Locating computer controls, connectors, and indicators” on page 1 • “Locating...

Right-side view Figure 2. Right-side view 1 Audio connector 5 Ethernet connector 2 SIM-card tray (on some models) 6 Video graphics array (VGA) connector 3 Media card reader slot 7 Security-lock slot 4 USB 3.0 connector 1 Audio connector Connect a headphone or a headset that has a 3.5-mm (0.14-inch) ...

4 USB 3.0 connector The Universal Serial Bus (USB) 3.0 connector is used for connecting USB-compatible devices, such as aUSB printer or a digital camera. Attention: When you attach a USB cable to the USB 3.0 connector, ensure that the USB mark is facing upward. Otherwise the connector might be damag...

• For Windows 8 and Windows 8.1: Press the Windows key to go to the Start screen. Click Lenovo Settings ➙ Power . Then select the Enable USB charge from the computer battery even when the computer is off check box under Always-on USB. Attention: When you attach a USB cable to this connector, ensure ...

4 Keyboard drainage holes The keyboard drainage holes can help drain out liquid from your computer if you accidentally spill water ordrink over the keyboard. 5 Emergency-reset hole If the computer stops responding and you cannot turn it off by pressing the power button, remove the acpower adapter an...

Status indicators The status indicators show the current status of your computer. Note: Your computer might have slight variations from the following illustrations. 1 Fn Lock indicator The Fn Lock indicator shows the status of Fn Lock function. For more information, see “Special keys”on page 26. 2 S...

The indicator in the ThinkPad logo and the indicator in the center of the power button show the systemstatus of the computer. • Fast-blinking for three times : The computer is initially connected to power. • On : The computer is on (in normal mode). • Fast-blinking : The computer is entering sleep o...

The FCC ID and IC Certification number labels are affixed on the wireless WAN card 1 and wireless LAN card 2 installed in the wireless communication card slots of the computer. To remove the wireless LAN card for repair or replacement, see “Replacing an M.2 wireless LAN card”on page 80. To remove th...

Specifications Size • Width: 339 mm (13.3 inches) • Depth: 232.5 mm (9.2 inches) • Height: 23 mm (0.9 inch) Heat output • 45 W (154 Btu/hr) maximum • 65 W (222 Btu/hr) maximum Power source (ac power adapter) • Sine-wave input at 50 to 60 Hz • Input rating of the ac power adapter: 100 to 240 V ac, 50...

Note: If you cannot find the program you need in Control Panel, open the navigation window of the Lenovo ThinkVantage Tools program and double-click the corresponding dimmed icon to install the program youneed. Then, follow the instructions on the screen. When the installation process completes, the...

Your computer supports the following Lenovo programs: • Active Protection System • Fingerprint Manager Pro • Lenovo Companion • Lenovo Mobile Access • Lenovo QuickCast • Lenovo QuickControl • Lenovo QuickDisplay • Lenovo Settings • Lenovo Solution Center • Lenovo Support • Lenovo Tools • Password Ma...

Chapter 2. Using your computer This chapter provides information on using some of the computer components. • “Registering your computer” on page 19 • “Frequently asked questions” on page 19 • “Using the multi-touch screen” on page 21 • “Special keys” on page 26 • “Using the ThinkPad pointing device”...

2. Click Properties . The Taskbar and Navigation properties window is displayed. 3. On the Navigation tab, locate the Start screen section, and then do one of the following: – To set the desktop as your default startup screen, select When I sign in or close all apps on a screen, go to the desktop in...

Tasks Touch gestures (touch models only) Mouse actions To customize tiles on the Start screen,or uninstall an application Windows 8.1: • Swipe in from the top or bottom edge, tap Customize , and then tap the desired icon. • Press and hold the desired icon. Windows 8: Move the desired icon downwardun...

• Do not use fingernails, gloved fingers, or inanimate objects except the approved digitizer pen for input on the screen. • Regularly calibrate the accuracy of the finger input to avoid a discrepancy. Tips on cleaning the multi-touch screen • Turn off the computer before cleaning the multi-touch scr...

Special keys Your computer has several special keys to help you work easily and effectively. Function keys and key combinations The keyboard has several function keys, which consist of the Fn key 1 and the function keys 2 . • + Enables or disables the Fn Lock function. When the Fn Lock function is d...

Replacing the cap The cap 1 on the end of the TrackPoint pointing stick is removable. After you use the cap for a period of time, you can replace the cap with a new one. Note: The TrackPoint cap used in your computer has grooves a as shown in the following illustration. Ensure that you replace the T...

– For Windows 8 and Windows 8.1: Move the pointer to the bottom-right corner of the screen to bring up the charms. Then click Settings ➙ Power ➙ Sleep . • Hibernation mode By using this mode, you can turn off your computer completely without saving files or exiting anyprograms that are running. When...

DANGER If the rechargeable battery pack is incorrectly replaced, there is danger of an explosion. The batterypack contains a small amount of harmful substances. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery pack away from fire. • Do not...

Ethernet connections You can connect your computer to a local network or a broadband connection by using the built-in Ethernetfeature of the computer. DANGER Your computer has an Ethernet connector. To avoid the risk of electrical shock, do not connectthe telephone cable to the Ethernet connector. W...

• Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improve signal strength, move your computer closer to the wireless access point. Using the wireless WAN connection Wireless wide area network (WAN), which uses cellular networks for data transmission, ena...

If you still cannot enable the NFC feature, check the NFC device setting in the ThinkPad Setup program by doing the following: 1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 107. 2. Select Security ➙ I/O Port Access . 3. Set the NFC device option to Enabled . You...

• If you set a resolution higher than the resolution you are using on the computer monitor, and use an external monitor that does not support that resolution, take advantage of the virtual screen function,which enables you to display only a part of the high-resolution screen image your computer prod...

Using the mini DisplayPort connector Your computer has a mini DisplayPort connector, which is a digital display interface for connection tovarious external devices, such as Cathode Ray Tube (CRT) monitors, LCD monitors, projectors, or evenhigh-definition televisions. This compact connector enables a...

• If your computer has the Intel graphics card, you can designate the primary display by doing the following: 1. Right-click on the desktop and select Screen Resolution . 2. Click the desired display image and select the Make this my main display check box. 3. Click OK . • When an application using ...

You also can use the integrated camera with other programs that provide features such as photographing,video capturing, and video conferencing. To use the integrated camera with other programs, open one of theprograms and start the photographing, video capturing, or video conferencing function. Then...

Removing a flash media card or a smart card Attention: • Before removing a card, stop the card first. Otherwise, data on the card might be corrupted or lost. • Do not remove a card while the computer is in sleep mode or hibernation mode. Otherwise, the system might not respond when you try to resume...

Chapter 3. You and your computer This chapter provides information about accessibility, comfort, and traveling with your computer. • “Accessibility and comfort” on page 45 • “Traveling with your computer” on page 47 Accessibility and comfort Good ergonomic practice is important to get the most from ...

Display : Position the display to maintain a comfortable viewing distance of 510-760 mm (20-30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the displayscreen clean and set the brightness to levels that enable you to see the screen clearl...

Assistive technologies enable users to access information in the most appropriate way. Some of thesetechnologies are already provided in your operating system. Others can be purchased through vendors, oraccessed through the World Wide Web http://www.lenovo.com/healthycomputing. Assistive technologie...

Chapter 4. Security This chapter provides information about how to protect your computer from theft and unauthorized use. • “Using passwords” on page 49 • “Hard disk security” on page 53 • “Setting the security chip” on page 54 • “Using the fingerprint reader” on page 55 • “Notice on deleting data f...

3. Depending on your need, do one of the following: • To set a password, do the following: a. In the Enter New Password field, type a desired password and press Enter. b. In the Confirm New Password field, retype the password and press Enter. • To change a password, do the following: a. In the Enter...

– Internal wireless device – Internal Bluetooth device – Internal Network Option ROM – Internal wireless WAN device – Security mode – Fingerprint reader priority Notes: • The system administrator can set the same supervisor password on many ThinkPad notebook computers to make administration easier. ...

3. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk password is changed. Note: The hard disk password cannot be removed in User HDP mode. – If you select Master HDP mode, follow the following steps to change the master hard disk password: 1. Type the current mast...

and Enterprise editions of the Windows 7, Windows 8, and Windows 8.1 operating systems. See “UsingWindows BitLocker Drive Encryption” on page 54. • Before you dispose of, sell, or hand over your computer, delete data stored on it. For more information, refer to “Notice on deleting data from your har...

To set an item on the Security Chip submenu, do the following: 1. Restart the computer. When the logo screen is displayed, press F1 to start the ThinkPad Setup program. 2. Select Security ➙ Security Chip by using the directional keys. 3. Press Enter. The Security Chip submenu opens. 4. Move to an it...

Swiping your finger over the fingerprint reader To swipe your finger over the fingerprint reader, do the following: 1. Place the top joint of your finger on the sensor. 2. Apply light pressure and swipe your finger toward you across the reader in one smooth motion. Do not lift your finger when you a...

Indicator behavior of the fingerprint reader Indicator behavior Description Green The fingerprint reader is ready for swiping. Amber The fingerprint cannot be authenticated. Associating your fingerprints with your power-on password and hard disk password To associate your fingerprints with your powe...

• Format your hard disk drive or solid-state drive, using the software for initializing it. • Use the recovery program provided by Lenovo to bring the hard disk drive or solid-state drive back to the factory default settings. These operations, however, only change the file location of the data; they...

Chapter 5. Recovery overview This chapter provides information about the recovery solutions. • “Recovery overview for the Windows 7 operating system” on page 61 • “Recovery overview for the Windows 8 and Windows 8.1 operating systems” on page 66 Recovery overview for the Windows 7 operating system T...

Using recovery media On the Windows 7 operating system, you can use recovery media to restore the computer to the factorydefault settings only. You can use recovery media to put the computer in an operational state after allother methods of recovery have failed. Attention: When you use recovery medi...

1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Enhanced Backup and Restore . The Rescue and Recovery program opens. 2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow. 3. Click the Restore your system from a backup ic...

• To restore your hard disk drive from a Rescue and Recovery backup or to restore your hard disk drive to the factory default settings, click Restore your system and follow the instructions on the screen. For more information about the features of the Rescue and Recovery workspace, click Help . Note...

When the rescue medium starts, the Rescue and Recovery workspace opens. The help information foreach feature is available from the Rescue and Recovery workspace. Follow the instructions to completethe recovery process. Reinstalling preinstalled programs and device drivers Your computer has provision...

• Use recovery media if all other methods of recovery have failed and you need to restore the hard disk drive to the factory default settings. See “Performing backup and recovery operations” on page 62. Note: If you are unable to access the Rescue and Recovery workspace or the Windows environment fr...

Attention: If you reset the computer to the factory default settings, all your personal files and settings will be deleted. To avoid data loss, make a backup copy of all the data that you want to keep. To reset your computer to the factory default settings, do the following: 1. Depending on the oper...

Creating and using recovery media You can create recovery media as backups for the Windows recovery environment and the Windowsrecovery image. If you cannot start the computer, you can use recovery media to troubleshoot and fix theproblems on your computer. It is recommended that you create recovery...

Note: Ensure that your computer is connected to ac power. 1. Turn on or restart the computer. Before the Windows operating system starts, repeatedly press F12. The Boot Menu window opens. 2. Select the recovery drive as the boot device. 3. Select a preferred language and then select a preferred keyb...

Chapter 6. Replacing devices This chapter contains the following items: • “Static electricity prevention” on page 71 • “Disabling the built-in battery” on page 71 • “Replacing the external battery pack” on page 72 • “Installing or replacing the SIM card” on page 73 • “Replacing the base cover assemb...

5. Click Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off. Wait for a few minutes to let the computer cool. The built-in battery will be automatically enabled again when the computer is connected to an ac poweradapter. Replacing the external battery p...

2. Unlock the battery latch 1 by sliding it to the unlocked position. Then slide the latch 2 to the unlocked position and hold it in the unlocked position, and then remove the battery pack 3 . 3. Insert a new battery pack until it clicks into place. Ensure that the latches are in the locked position...

7. Insert the tray into the computer. 8. Reconnect the ac power adapter and all cables. Replacing the base cover assembly Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic. To replace the base co...

5. Pry up the latches 1 in ascending alphabetical order (a to h) as illustrated, and then remove the base cover assembly 2 . 6. Reinstall the new base cover assembly 1 and tighten the screws 2 in ascending alphabetical order (a to h) as illustrated. 7. Reinstall the external battery pack and turn th...

10. Reinstall the base cover assembly. See “Replacing the base cover assembly” on page 75. 11. Reinstall the external battery pack. 12. Turn the computer over again. Connect the ac power adapter and all cables. Replacing a memory module Before you start, print these instructions. Increasing memory c...

5. Open the latches on both sides of the slot at the same time 1 , and then remove the memory module 2 . Save the removed memory module for future use. 6. Place the notched end of the new memory module toward the contact edge side of the memory slot, and insert the memory module 1 into the slot at a...

10. Connect the antenna cables to the new wireless LAN card. Ensure that you attach the gray cable to the main connector on the card, and the black cable to the auxiliary connector on the card. 11. Reinstall the base cover assembly. See “Replacing the base cover assembly” on page 75. 12. Reinstall t...

12. Reinstall the external battery pack. 13. Turn the computer over again. Connect the ac power adapter and all cables. Replacing the keyboard Before you start, print these instructions. DANGER During electrical storms, do not connect the cable to or disconnect it from the telephone outleton the wal...

7. Reinstall the external battery pack. 8. Connect the ac power adapter and all cables. Replacing the coin-cell battery Before you start, print these instructions. DANGER If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell batterycontains a small amount o...

Chapter 7. Enhancing your computer This chapter provides instructions on how to use hardware devices to expand your computer capabilities. Itincludes the following topics: • “Finding ThinkPad options” on page 95 • “ThinkPad docking stations” on page 95 Finding ThinkPad options If you want to expand ...

ThinkPad Basic Dock Front view 1 Power button : Press the power button to turn on or turn off the computer . 2 Eject button : Press the eject button to release the computer from the docking station. 3 Sliding adjuster : Use the sliding adjuster as a guide to align the docking station connector on yo...

4 Ethernet connector : Used to connect the docking station to an Ethernet LAN. Note: If you need to use an Ethernet connector or an external monitor connector when your computer is attached to a docking station, use the Ethernet connector or the external monitor connector on the dockingstation, inst...

ThinkPad Ultra Dock Front view 1 Power button : Press the power button to turn on or turn off the computer. 2 Key lock indicator : This indicator turns on when the system lock key is in the locked position. 3 Docking status indicator : This indicator turns on when your computer is docked. 4 Eject bu...

1 Always-on USB connector : Used to connect devices that are compatible with USB 2.0 or charge some mobile digital devices and smartphones when your computer is in sleep or hibernation mode. 2 USB 2.0 connectors : Used to connect devices that are compatible with USB 2.0. 3 USB 3.0 connectors : Used ...

3. Align the top-left corner of the computer with the position mark of the docking station. Attach your computer to the docking station vertically until you hear a click 1 . Then turn the system lock key to the locked position 2 . 4. Check the docking status indicator. If the docking status indicato...

3. Press the eject button until the computer moves up. Then, grasp both sides of the computer to remove it. Connecting external displays to a docking station For the ThinkPad Pro Dock, if you connect two external displays to the DisplayPort connector and the DVIconnector, the DVI connector is inacti...

For the ThinkPad Ultra Dock, if you connect two external displays to the DisplayPort connector and theHDMI connector, the HDMI connector is inactive. Security features The system lock key has two positions as shown in the drawing. The security feature is different when the key is in different positi...

Chapter 8. Advanced configuration This chapter provides the following information to help you configure the computer: • “Installing a new operating system” on page 105 • “Installing device drivers” on page 107 • “Using the ThinkPad Setup program” on page 107 • “Using system management” on page 119 I...

Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the ThinkPad Setup program. Otherwise the operating system will not start correctly. When you install the Windows 7 operating system, you might need one of the following country or regioncodes: Country...

Country or region Code Country or region Code China SC Netherlands NL Denmark DK Norway NO Finland FI Spain SP France FR Sweden SV Germany GR Taiwan and Hong Kong TC Italy IT United States US Japan JP Installing device drivers Device driver is the program that operates a particular hardware device o...

Table 4. Config menu items (continued) Menu item Submenu item Value Comments combination in the StartupInterrupt Menu window.To display the StartupInterrupt Menu window,press the black buttonor Enter key during thepower-on self-test (POST). CIRA Timeout 0-255 Note: The default value is 60 seconds. S...

Table 5. Security menu items (continued) Menu item Submenu item Value Comments Intel AT ModuleActivation • Disabled • Enabled • Permanently Disabled Enable or disable the UEFI BIOS interface toactivate the Intel AT module, which is an optionalanti-theft service from Intel. Note: If you set the Intel...

• If you are using the BitLocker drive encryption, do not change the startup sequence. BitLocker drive encryption locks the computer from starting once detects the change of startup sequence. To change the startup sequence temporarily so that the computer starts from a desired drive, do the followin...

Your computer is designed for manageability, so that you can redirect more resources to better meetyour business objectives. This manageability, known as Total Cost of Ownership (TCO), enables you to remotely operate clientcomputers in the same way as you operate your own computer, such as turning o...

Chapter 9. Preventing problems An important part of owning a ThinkPad notebook computer is maintenance. With proper care, youcan avoid common problems. This chapter provides information that can help you keep your computerrunning smoothly. • “General tips for preventing problems” on page 123 • “Maki...

– Restart the computer and start the recovery operation. – If your computer uses discs as the recovery media, do not remove the disc from the drive until prompted to do so. • For suspected hard disk drive issues, refer to “Diagnosing problems” on page 129 and run a diagnostic test for the drive befo...

For more information about how to use the System Update program, refer to the help information systemof the program. Taking care of your computer Although your computer is designed to function reliably in normal work environments, you need to usecommon sense in handling it. By following the importan...

• Store your external and removable hard disk drive or optical drives in the appropriate containers or packaging when they are not being used. • Before you install a memory card such as an SD card, SDHC card, SDXC card, and a MultiMediaCard, touch a metal table or a grounded metal object. This actio...

Chapter 10. Troubleshooting computer problems This chapter provides information on what to do if you experience a problem with your computer. • “Diagnosing problems” on page 129 • “Troubleshooting” on page 129 Diagnosing problems If you experience problems with your computer, use the Lenovo Solution...

Solution : The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced, and the box serial number needs to be reinstalled. Have the computer serviced. • Message : 0189: Invalid RFID configuration information area Solution : The EEPROM checksum is not correct (block # 4 ...

Beep errors Table 7. Beep errors Problem Solution One short beep, pause, three short beeps, pause, threemore short beeps, and one short beep Have the computer serviced. One long and two short beeps The video function has a problem. Have the computerserviced. Four cycles of four short beeps Shut down...

Note: Some models do not have a wireless WAN card. Bluetooth problems Note: Check your connection anytime and make sure that no other Bluetooth-enabled device is searching for the device to which you want to connect. Simultaneous searching is not allowed in the Bluetooth connection. • Problem : Soun...

2. Click Keyboard . 3. Select the Hardware tab. In the Device Properties pane, make sure that you see this message: Device Status: This device is working properly. If keys on the keyboard still do not work, have the computer serviced. • Problem : All or some keys on the external numeric keypad do no...

Solution : Did you install the operating system or program correctly? If they are installed and configured correctly, have the computer serviced. • Problem : The screen stays on even after you turn off your computer. Solution : Press and hold the power button for four seconds or more to turn off you...

• Problem : The Extend desktop function does not work. Solution : Enable the Extend desktop function. See “Using dual displays” on page 41. • Problem : If you use the Extend desktop function, you cannot set a higher resolution or higher refresh rate on the secondary display. Solution : Change the re...

Solution : Make sure that the Microphone Boost function is turned on and set by doing the following: 1. Open Control Panel and click Hardware and Sound . 2. Click Sound . 3. Click the Recording tab in the Sound window. 4. Select Microphone , and click the Properties button. 5. Click the Levels tab, ...

2. If the battery is charged but the computer does not run, call Lenovo Customer Service Center to have it serviced. A power button problem Problem : The system does not respond, and you cannot turn off the computer. Solution : Turn off the computer by pressing and holding the power button for four ...

– If the system-status indicator(illuminated ThinkPad logo) blinks slowly, your computer is in sleep mode. Connect the ac power adapter to the computer; then press Fn. – If the system-status indicator(illuminated ThinkPad logo) is off, your computer is in power-off state or in hibernation mode. Conn...

A software problem Problem : An application does not run correctly. Solution : Make sure that the problem is not being caused by the application. Check that your computer has the minimum required memory to run the application. Refer to the manualssupplied with the application. Check the following: •...

Chapter 11. Getting support This chapter provides information about getting help and support from Lenovo. • “Before you contact Lenovo” on page 145 • “Getting help and service” on page 145 • “Purchasing additional services” on page 147 Before you contact Lenovo Often, you can solve your computer pro...

• Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts• Identification of software problem sources• Configuration of the UEFI BIOS as part of an installation or upgrade• Changes, modifications, or upgrades to device drivers• Installation and maintenance of network oper...

Appendix A. Regulatory Information Wireless related information Wireless interoperability The M.2 wireless LAN card is designed to be interoperable with any wireless LAN product that is basedon Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or OrthogonalFrequency Divisi...

• Battery Status Profile Usage environment and your health Integrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, thelevel of energy emitted is far much less than the electromagnetic energy emitted by wireless devices likefor example mobile phones. D...

4 Wireless LAN antenna (auxiliary) Locating wireless regulatory notices For more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with the computer. If the computer is shipped without the Regulatory Notice , you can find it on the Web site at: http://www.leno...

Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. European Union - Compliance to the Electromagnetic CompatibilityDirective This product is in conformi...

Appendix B. WEEE and recycling statements Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipmentwhen it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners inrecycling their IT products. For information on...

Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or otherenvironmental sensitive substances. To properly dispose of disused components, such as a printed circuitboard or drive, use the methods described above for collec...

Battery recycling information for the European Union Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/ECconcerning batteries and accumulators and waste batteries and accumulators...

Appendix D. ENERGY STAR model information ENERGY STAR ® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products andpractices. Lenovo is proud to offer our customers product...

Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: LenovoAccess ConnectionsActive Protection SystemRescue and RecoverySecure Data DisposalThinkPadThinkVantageTrackPointUltraConnect Intel and Intel SpeedStep are trademarks of Intel Corporation in t...