Page 3 - Contents
Contents Chapter 1. Introduction . . . . . . . . 1 Terminology . . . . . . . . . . . . . . . . 1 Safety information . . . . . . . . . . . . . 1 Chapter 2. Overview of the LenovoThinkServer Management Module . . 3 Features of the ThinkServer Remote ManagementModule . . . . . . . . . . . . . . . . . 3...
Page 4 - ii
Page 5 - Chapter 1. Introduction; User Guide; Terminology; Abbreviation; Safety information; WARNING
Chapter 1. Introduction Thank you for ordering and using the Lenovo ® ThinkServer ® Management Module (TMM), hereinafter referred to as Remote Management Module. The User Guide describes how to use the Remote Management Module, the overview of the module features, and how to set up and operate the m...
Page 6 - Dangerous situations, equipment and cables:; power, telephones, and signal cables may have the danger; ESD and holding system boards:
Dangerous situations, equipment and cables: power, telephones, and signal cables may have the danger of electric shock. Before opening the device, shut down the server, disconnected the power cord, thecommunication system, network and modem connected to the server. Otherwise, it may result in person...
Page 7 - Features of the ThinkServer Remote Management Module; • USB 2.0 media redirection - boot from remote media
Chapter 2. Overview of the Lenovo ThinkServer ManagementModule This topic describes the features of the Remote Management Module. The Remote Management Module runs on the server system as an integrated solution and integratesthe embedded operating system. Independent of the server operating system, ...
Page 9 - Press F1 as soon as you see the logo screen.; Server Management; From the Configuration option, you can choose; or; DHCP; STATIC; Configuration
Chapter 3. Configuration of the ThinkServer RemoteManagement Module This topic describes how to use the server configuration utility to change the Remote Management Modulefrom the un-configured status to the running status. When first installed, the Remote Management Moduleby default will search DHC...
Page 11 - Prestart; Internet
Chapter 4. ThinkServer Remote Management Module QuickStart This topic describes how to quickly acquaint with related operations of the Remote Management Module. Inaddition, it also describes the advanced features of how to log on the module and options available whilebrowsing, and how to log out. Pr...
Page 14 - OK; to view the home page of the Remote Management Module.
Figure 3. Configuring IE ESC - setp 3 For making the remote console (KVM) window of the managed server works, you must install Java runtimeenvironment (JRE) V6.0 Update 24 or later. Log-on To log on to the ThinkServer Remote Management Module, do the following: 1. Enter the IP address assigned by th...
Page 15 - Navigation; There also are tabs on the top of the home page:
Navigation When the ThinkServer Remote Management Module is successfully logged on, the ThinkServer RemoteManagement Module home page is displayed. There are several tabs on the vertical toolbar which is on the left pane of the ThinkServer RemoteManagement Module home page. By clicking these tabs, y...
Page 16 - There is a; Refresh; on
There is a Refresh button on the right pane. Click this button to refresh the current page. Log-out To log out the ThinkServer Remote Management Module and turn back to the log on page, click Logout on the right top of the program home page. Note: Automatic Timeout: If the Web console detects no use...
Page 18 - Macros menu of the remote console; Tools menu of the remote console; By clicking the; Power menu of the remote console; By clicking the
• Fit : Fit the window mode. Macros menu of the remote console By clicking the Macros option on the menu bar of the remote console, you can take the following operations: • Hold Ctrl/Alt/Windows keys : Allow simulating to press these special keys on the remote keyboard. On the local keyboard, these ...
Page 19 - Help; information about each page.; Properties; Viewing properties; The above page provides the following server information:; Product Name; Product Information; Firmware Version; Building Time; ASIC Type
Chapter 6. ThinkServer Remote Management Module Webconsole options This topic describes every page of the Web console and each page is divided into several partscorresponding separately to the several tabs at the left side of the pane. In each part, there are detailedillustrations and introductions ...
Page 20 - Viewing the System Event Log
Server information The Server Information page shows the data related to the server health, such as sensor readings and eventlogs. Click the Server Information tab on the left pane to show this page. Viewing sensor readings The Temperatures and Voltages pages show the system sensor information, incl...
Page 21 - Event management; The; Platform Events; button to configure it.
Figure 7. System Event Log Event management The Event Management tab is used to configure alerts. The following server management options are included: • Platform Events • Trap Settings • Email Settings • Serial Over LAN Platform Events You can use this function to modify or delete the alert setting...
Page 22 - Click; Trap Settings; on the left pane of the home page to set the destination IP address.; Email Settings; Serial Over LAN; page provides the following settings:
Trap Settings (SNMP) Click Trap Settings on the left pane of the home page to set the destination IP address. Figure 9. Trap Settings Email Settings (SMTP) The Email Settings page is used to configure the alert. Users can receive an alert by E-mail when events occur. Figure 10. Email Settings Serial...
Page 23 - Option; Baud Rate; Remote control; • Remote management; Remote management; Remote Management Module; page will automatically select the; Remote Console
Figure 11. Serial Over LAN Table 5. Serial Over LAN settings Option Comments Enable SerialOver LAN Enables the Serial Over LAN function when the checkbox is checked. Baud Rate Sets the Serial Over LAN baud rate from a drop-down list (19.2kbps, 38.4 kbps, 57.6 kbps,or 115.2 kbps). Channel PrivilegeLe...
Page 24 - Launch Java KVM Client; Click the; Launch Java VM Client; stopping the remote media redirection.
Figure 12. Remote management configuration Figure 13. Remote management launch Click the Launch Java KVM Client button to start the redirection console and remotely manage the server. Note: Before you start the JNLP file, the client must be installed with Java Runtime Environment (JRE) V6.0 Update 2...
Page 25 - Redirect CDROM / Redirect ISO; : Enables you to redirect the local CD-ROM/DVD drivers or ISO images; Power control; Power Control; page shows the server power status.; You can perform the following power control operations:
Figure 14. Redirecting virtual device • Redirect CDROM / Redirect ISO : Enables you to redirect the local CD-ROM/DVD drivers or ISO images in the file system of local client to virtual CD-ROM devices in the remote systems. • Redirect Floppy/USB Key/Redirect Floppy/USB Key Image : Enables you to redi...
Page 26 - Network; You can configure the Network settings by click
Table 6. Power control Option Comments Power Status Shows the current status of the power control (OFF or ON). Power On System Turns on the system when it is in the off state. Power OffSystem Turns off the system when it is in the on state. Power CycleSystem Turns off, then reboots the system (cold ...
Page 27 - Network security; Security; • To generate an SSL Certificate, click; Generate Certificate; • To upload an SSL Certificate, click; Upload Certificate; Users; Delete
Network security The new values are available to the firewall immediately, but may not be utilized until the next securityevent occurs. Figure 17. Network security settings Security This page can be used to upload SSL certificate and private key in order to get access to the device insafe mode. • To...
Page 28 - Service; Apply Changes; IPMI; IPMI Serial
Figure 19. Users setting Notes: • The user lenovo and three can not be modified or deleted. • To add a new user, select a blank row from the list and click User ID. • To modify a user, select this user ID from the list and modify user to the relevant settings, then click Apply Changes . • To delete ...
Page 29 - Session; to refresh the sessions status.
The IPMI Serial contains the following options: Table 8. IPMI Serial Option Comments ConnectionMode Settings Sets the IPMI serial connection mode from a drop-down list. Available values are Direct Connect Basic Mode and Direct Connect Terminal Mode . Baud Rate Sets the IPMI serial baud rate (data sp...
Page 30 - LDAP; Update
Figure 22. Session settings LDAP The Lightweight Directory Access Protocol (LDAP) is an application protocol for reading and editingdirectories over an IP network. A directory is an organized set of records. LDAP directories often use DomainName System (DNS) names for the highest levels. Figure 23. ...
Page 31 - Utilities
Figure 24. Firmware update Firmware update steps: 1. Browse to or enter the path where the firmware image file resides. 2. Select update type. 3. Click the Upload button. If the file is a valid file, all other sessions will be terminated and the image upload will begin. 4. For a successful upload, t...
Page 32 - Languages
Figure 25. Utilities Languages The Web UI’s display will according to the browser’s language to decide which language to use in Web UI.The languages currently offered are Chinese and English. 28 ThinkServer Management Module User Guide
Page 33 - Appendix A. Frequently asked questions; This topic lists the frequently asked questions.; Question; : Log on Remote Management Module failed.; : Remote Management Module can not be connected.; Answer
Appendix A. Frequently asked questions This topic lists the frequently asked questions. • Question : Log on Remote Management Module failed. Answer : Check your user name and password. • Question : Remote Management Module can not be connected. Answer : Check the hardware – Whether the host on which...
Page 36 - Trademarks
Trademarks Lenovo, the Lenovo logo, and ThinkServer are trademarks of Lenovo in the United States, other countries, orboth. Internet Explorer, Microsoft, Windows, and Windows Server are trademarks of the Microsoft group ofcompanies. Other company, product, or service names may be trademarks or servi...
