Page 3 - User
ThinkServer RD120 Types 6444, 6445, 6446, and 6447 User Guide
Page 5 - Contents; iii
Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Chapter 1. The ThinkServer RD120 server . . . . . . . . . . . . . . 1 Related documentation . . . . . . . . . . . . . . . . . . . . . . 2 Notices and statements in this document . . . . . . . . . . . . . . . . 2 Features and s...
Page 6 - iv
Removing the fan-bracket assembly . . . . . . . . . . . . . . . . . 70 Installing the fan-bracket assembly . . . . . . . . . . . . . . . . . 72 Replacing the CD-RW/DVD drive . . . . . . . . . . . . . . . . . . 73 Completing the installation . . . . . . . . . . . . . . . . . . . . . 74 Installing the...
Page 7 - Safety
Safety Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Lees voordat u dit produc...
Page 9 - vii
Statement 1: DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. v Connect all power cords to a ...
Page 10 - viii
Statement 2: CAUTION: When replacing the lithium battery, use only the battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not prope...
Page 11 - ix
Statement 3: CAUTION: When laser products (such as CD drives, DVD drives, fiber optic devices, or transmitters) are installed, note the following: v Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable part...
Page 13 - xi
Statement 8: CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a prob...
Page 14 - xii
Statement 15: CAUTION: Make sure that the rack is secured properly to avoid tipping when the server unit is extended. xii ThinkServer RD120 Types 6444, 6445, 6446, and 6447: User Guide
Page 18 - What; Baseboard
Table 1. Features and specifications Microprocessor: v Intel ® Xeon ® FC-LGA 771 dual-core with 4 MB Level-2 cache or quad-core with 8 MB (2x4 MB) Level-2 cache v Support for up to two microprocessors v Support for Intel Extended Memory 64 Technology (EM64T) Notes: 1. Use the Configuration/Setup Uti...
Page 21 - and
v Systems-management capabilities The server supports an optional IBM Remote Supervisor Adapter II SlimLine. When you use this adapter, you can manage the functions of the server locally and remotely. The Remote Supervisor Adapter II SlimLine also provides system monitoring, event recording, and dia...
Page 29 - Server
Chapter 2. Installing optional devices This chapter provides detailed instructions for installing optional hardware devices in the server. Server components The following illustrations show the major components in the server. The illustrations in this document might differ slightly from your hardwar...
Page 32 - connectors
System-board optional-device connectors The following illustration shows the connectors on the system board for user-installable optional devices. 1 PCI Express slots 3 and 4 6 Fan connectors 2 Systems-management Ethernet connector 7 Voltage regulator module connector 3 PCI riser card connector 8 Mi...
Page 38 - LEDs
System-board LEDs The following illustration shows the light-emitting diodes (LEDs) on the system board. 1 Riser-card-missing error LED 6 VRM error LED 2 RAID error LED 7 Microprocessors 1 and 2 error LEDs 3 DIMMs 1 - 12 error LEDs 8 PCI slots 3 and 4 error LEDs 4 BMC heartbeat LED 9 System-manageme...
Page 61 - drives
the battery. This might take a few minutes, after which the startup process continues. This is a one-time occurrence. Important: You must allow the initialization process to be completed. If you do not, the battery will not work, and the server might not start. The battery comes partially charged, a...
Page 77 - memory
When you use memory mirroring, you must install two pairs of DIMMs at a time. The four DIMMs in each group must be identical. See Table 4 for the DIMM connectors that are in each group. Table 4. Memory mirroring DIMM installation sequence Group DIMM connectors 1 1, 4, 7, and 10 2 2, 5, 8, and 11 3 3...
Page 83 - Removing
1 LED 2 Hot-swap fan To install any of the 10 replaceable fans, complete the following steps: 1. Read the safety information that begins on page v and “Installation guidelines” on page 29. 2. If you have not done so already, slide the server out of the rack and remove the cover (see “Removing the co...
Page 89 - Front
4. Install the server in a rack. See the Rack Installation Instructions that come with the server for complete rack installation and removal instructions. 5. To attach peripheral devices and connect the power cords, see “Connecting the cables.” Attention: In a dc power environment, only trained serv...
Page 90 - Updating
Rear view 1 Power cord connector 7 USB 2 connector 2 Systems-management Ethernet connector 8 USB 1 connector 3 Ethernet 1 connector 9 Video connector 4 USB 4 connector 10 Serial connector 5 USB 3 connector 11 SAS connector 6 Ethernet 2 connector Attention: In a dc power environment, only trained ser...
Page 93 - Using
Chapter 3. Configuring the server The following configuration programs and capabilities come with the server: v Configuration/Setup Utility program The Configuration/Setup Utility program is part of the basic input/output system (BIOS). Use it to configure serial port assignments, change interrupt r...
Page 98 - Passwords; password
more information about error codes that occur. See the Hardware Maintenance Manual on the ThinkServer Documentation DVD for instructions for running the diagnostic programs. v Save Settings Select this choice to save the changes that you have made in the settings. v Restore Settings Select this choi...
Page 99 - Administrator
v If an administrator password is set, type the administrator password at the password prompt (see “Administrator password”). Start the Configuration/Setup Utility program and reset the power-on password. v Remove the battery from the server and then reinstall it. For instructions for removing the b...
Page 105 - Notices
Appendix. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is no...
Page 108 - Remarque; Recycling
Remarque : Cette marque s’applique uniquement aux pays de l’Union Européenne et à la Norvège. L’etiquette du système respecte la Directive européenne 2002/96/EC en matière de Déchets des Equipements Electriques et Electroniques (DEEE), qui détermine les dispositions de retour et de recyclage applica...
Page 109 - For
Battery return program This product may contain a lithium or lithium ion battery. Consult your user manual or service manual for specific battery information. The battery must be recycled or disposed of properly. Recycling facilities may not be available in your area. For information on disposal or ...
Page 113 - Index
Index A ac power LED 11 acoustical noise emissions 3, 4 adapter installing 39 PCI bus, identification 40 PCI Express bus 43 PCI-X bus 43 removing 43 requirements 40 slot types 40 specifications 3 administrator password 81, 85 air baffle DIMM installing 38 removing 37 microprocessor installing 36 rem...