Lenovo E54- Manual

Page 4 - Notices; Attention: Lenovo Director of Licensing

Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended...

Page 5 - Trademarks; The following terms are trademarks of Lenovo in the United States,

Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the sam...

Page 6 - Further Help; Customer

Further Help If you are unable to correct the problem yourself, you may seek further help as follows: Call the Customer Support Center . In the US call 1-800- 426 - 7378 In Canada (Toronto Only) call 416-383-3344 In Canada (all others) call 1-800-565-3344 If possible, stay by your computer. Your Tec...

Page 7 - Contents; P ACK ING LIS T; Monitor; Installing the Device Driver; Installing the Device Driver for Windows 95 or Windows 98

5 Contents Packing list ----------------------------------------------------- 5 Precautions --------------------------------------------------- 6 Installation Instructions ------------------------------------- 7 Swivel Base --------------------------------------------------- 7 Power cord ---- ------...

Page 8 - Positioning the monitor; below your eye level when you sit at your workstation.; Orientation; of you so that you do not have to twist your body. Tilt the monitor to a; Work

PRECAUTIONS Workplace preparation Positioning the monitor Choose a suitable place to position the monitor where it is not near fluorescent desk lighting or any equipment that produces magnetic fields that could cause interference. Ensure that the furniture or equipment can support the weight of the ...

Page 10 - Video cable; Connecting the video cable:; Power Cord

8 Power Source: 1. Make sure the power cord is the correct type that is required in your area. 2. This monitor has a universal power supply that allows operation in 100/120V ac or 220/240V ac voltage (No user adjustment is required) 3. Connect the power cord into your monitor’s power input socket, a...

Page 11 - EXTERNAL CONTROLS

9 OPERATING INSTRUCTIONSGeneral Instructions The power switch is located at front panel of the monitor. Press the power switch to turn the monitor on or off. The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your...

Page 12 - Power; How to adjust a setting

10 Notes • Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place subject to direct sunlight , or excessive dust or mechanical vibration or shock. • Save the original shipping carton and packing materials, as they will come in handy if you ever have...

Page 13 - ADJUSTING THE PICTURE; ICONS

ADJUSTING THE PICTURE The description for function control ICONS 1. CONTRAST Adjust the picture contrast. 2. BRIGHTNESS Adjust the picture brightness. 3. H- CENTER Adjust the horizontal position of the picture. 4. H- SIZE Adjust the picture’s horizontal size. 5. V- CENTER Adjust the vertical positio...

Page 15 - restored by pressing a key on the keyboard, or clicking the mouse.; Plug and play; Plug & Play DDC2B Feature; information about its display capabilities.

13 THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IFTHERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THISMONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEOINPUT SIGNAL. This feature is designed to conserve electrical energy by reducing power consumption when there is no video input signal present.when th...

Page 17 - APPENDIX A – SPECIFICATIONS

15 APPENDIX A – SPECIFICATIONS CRT Size 38.1 cm (15 in.), 90º deflection, 22.5 mm neck CRT Viewable Image Size 35.4 cm (13.9 in.), diagonal Type 0.27 mm dot pitch. Video 0.7 Vpp, R,G,B Analog Input Separate Sync. TTL Level H./V.- Sync. Positive / Negative Scanning H-Frequency 30 - 69 kHz Frequency V...

Page 20 - If you are using Windows 95:; Next

Installing the Device Driver Installing the Device Driver for Windows 95 or Windows 98 To install the device driver in Microsoft® Windows®95 or Windows98, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows 95 or Windows 98. 1. Turn ...

Page 21 - Installing the Device Driver for Windows 2000 or Windows Me

Installing the Device Driver for Windows 2000 or Windows Me To install the device driver in Microsoft® Windows®2000 Professional or Microsoft Windows Millennium Edition (Me), do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows 2000 o...

Page 22 - Installing the device driver in Windows XP; Hardware Update Wizard

Installing the device driver in Windows XP To install the device driver in Microsoft® Windows XP, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in XP. 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connec...

Page 23 - Vista; Display Properties; button; Have Disk; monitor

Installing the device driver in Windows Vista To install the device driver in Microsoft® Windows Vista , do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista . 1. Turn off the computer and all attached devices. 2. Ensure that th...

Table of Contents:

Other Manuals for Lenovo E54

Summary

Other Lenovo Models