Lenovo 3379- User Manual

Chapter 1. Product overview This chapter describes the computer features, specifications, preinstalled softwareprograms, and part and connector locations. Features This section provides an overview of the computer features. System information The following information covers a variety of models. For...

Specifications This section lists the physical specifications for your computer. Dimensions Width: 317 mm (12.48 inches) Height: 99 mm (3.90 inches) Depth: 355 mm (13.98 inches) Weight Maximum configuration as shipped: 7.5 kg (16.53 lbs) Environment Air temperature: Operating: 10° to 35°C (50° to 95...

Software overview This section describes the software preinstalled on the computers that have aninternal hard disk drive and an operating system from Lenovo. Software provided with your Windows operating system This section describes the Windows applications included with your computer. Software pro...

keep updated are programs provided by Lenovo, such as the Rescue and Recoveryprogram and the Productivity Center program. ThinkVantage Power Manager: The ThinkVantage Power Manager program provides convenient, flexible, and complete power management for yourThinkCentre ® computer. By using the Think...

Locating connectors on the rear of your computer Figure 2 shows the locations of the connectors on the rear of your computer. Someconnectors on the rear of your computer are color-coded to help you determinewhere to connect the cables on your computer. 1 Serial port (some models) 9 Standard mouse co...

Locating components Figure 3 shows the locations of the various components in your computer. To openthe computer cover, see “Opening the computer cover” on page 14. 1 Hard disk drive (some models) 4 Optical drive 2 Microprocessor, heat sink and fan assembly 5 Memory slots (4) 3 Internal speaker (som...

Locating parts on the system board Figure 4 shows the locations of the parts on the system board. 1 PCI card slot 11 Memory slots (4) 2 PCI Express x16 graphics card slot 12 24-pin power connector 3 Battery 13 Serial (COM 2) connector 4 Internal speaker connector 14 Front audio connector 5 Cover pre...

Chapter 2. Installing options and replacing hardware This chapter provides instructions for installing options and replacing hardware foryour computer. You can expand the capabilities of your computer by addingmemory modules, PCI cards, or drives. When installing or replacing an option, usethese ins...

Installing external options External speakers, a printer, or a scanner can be connected to your computer. Forsome external options, you must install additional software in addition to makingthe physical connection. When installing an external option, see “Locatingconnectors on the front of your comp...

Accessing the system board components and drives This section provides instructions on how to access the system board componentsand drives. To access the system board components and drives: 1. Open the computer cover. See “Opening the computer cover” on page 14. 2. On some models, you might need to ...

6. Position the new memory module over the memory slot. Make sure that thenotch 1 on the memory module aligns correctly with the slot key 2 on the system board. Push the memory module straight down into the slot until theretaining clips close. What to do next: v To work with another option, go to th...

4. Install the new card into the appropriate card slot on the system board androtate the card retainer to the closed position. See “Locating parts on thesystem board” on page 11. What to do next: v To work with another option, go to the appropriate section. v To complete the installation, go to “Com...

When you install an internal drive, it is important to note the type and size of thedrive that you can install in each bay. Also, it is important to correctly connect theinternal drive cables to the installed drive. Drive specifications Your computer comes with the following factory-installed drives...

Installing a drive in bay 2 Attention Do not open your computer or attempt any repair before reading and understanding the“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide , go to: h...

5. Slide the drive into the bay until it locks into position. 6. Pivot the optical drive bay assembly upward to gain access to the cableconnections and connect the signal cable and the power cable for the drive. 7. Continue at “Connecting a SATA drive.” Connecting a SATA drive A SATA optical drive o...

What to do next: v To work with another option, go to the appropriate section. v To complete the installation, go to “Completing the parts replacement” onpage 36. Replacing the hard disk drive Attention Do not open your computer or attempt any repair before reading and understanding the“Important sa...

Replacing the optical drive Attention Do not open your computer or attempt any repair before reading and understanding the“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide , go to: h...

6. Install the new optical drive into the drive bay until it snaps into position. 7. Connect the signal cable and the power cable to the rear of the optical drive. 8. Go to “Completing the parts replacement” on page 36. Replacing the battery Attention Do not open your computer or attempt any repair ...

Replacing the power supply assembly Attention Do not open your computer or attempt any repair before reading and understanding the“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide , ...

8. Install the new power supply assembly into the chassis so that the screw holesin the new power supply assembly align with those in the chassis. 9. Install and tighten the four screws at the rear of the chassis to secure thepower supply assembly. Note: Use only the screws provided by Lenovo. 10. R...

Replacing the card reader Attention Do not open your computer or attempt any repair before reading and understanding the“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide , go to: htt...

Replacing the keyboard Attention Do not open your computer or attempt any repair before reading and understanding the“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide , go to: http:/...

2. Unplug all power cords from electrical outlets. 3. Locate the connector for the mouse. Note: Your mouse might be connected to a standard mouse connector 1 or a USB connector 2 . Depending on where your mouse is connected, see “Locating connectors on the rear of your computer” on page 8 or“Locatin...

2. Ensure that the cables are routed correctly before lowering the optical drive bayassembly. Important Correctly route all power supply cables to avoid interference with thedrive bay assembly. Keep cables clear of the hinges and sides of thecomputer chassis. 3. Lower the optical drive bay assembly....

Make sure that any security cables you installed do not interfere with othercomputer cables. Integrated cable lock An integrated cable lock (sometimes referred to as the Kensington lock) can beused to secure your computer to a desk, table, or other non-permanent fixture. Thecable lock attaches to a ...

Chapter 3. Recovery information This chapter will help you get familiar with recovery solutions provided byLenovo. This chapter explains when and how to use the following recoverymethods: v Creating and using recovery media v Performing backup and recovery operations v Using the Rescue and Recovery ...

Using recovery media This section provides instructions on how to use recovery media on differentoperating systems. v To use recovery media on Windows 7 or Windows Vista, do the following: Attention: When you use recovery media to restore the computer to the factory default settings on Windows 7 or ...

Using the Rescue and Recovery workspace The Rescue and Recovery workspace resides in a protected, hidden area of yourhard disk drive that operates independently from the Windows operating system.This enables you to perform recovery operations even if the Windows operatingsystem cannot be started. Yo...

Notes: 1. After restoring a hard disk drive to the factory default settings, you might haveto reinstall device drivers for some devices. See “Installing or reinstallingdevice drivers” on page 47. 2. Some computers come with Microsoft Office or Microsoft Works preinstalled. Ifyou need to recover or r...

Note: Make sure your rescue device (optical drive, USB device, or the secondaryinternal hard disk drive) is set as the first boot device in the startup devicesequence before doing this procedure. See “Selecting a startup device” onpage 51. To use the rescue medium you have created, do one of the fol...

Notes: 1. If the repair operation completes without any error, you will be able to accessthe Rescue and Recovery workspace by repeatedly pressing the F11 key whileyou restart your computer. When you hear beeps or see a logo screen, releasethe F11 key. You will also be able to access the Windows envi...

Chapter 4. Using the Setup Utility The Setup Utility program is used to view and change the configuration settings ofyour computer, regardless of which operating system you are using. However, theoperating-system settings might override any similar settings in the Setup Utilityprogram. Starting the ...

Password considerations A password can be any combination of up to 64 alphabetic and numeric characters.For security reasons, it is recommended to use a strong password that cannot beeasily compromised. To set a strong password, use the following guidelines: v Have at least eight characters in lengt...

Chapter 5. Updating system programs This chapter contains information about updating POST/BIOS and how to recoverfrom a POST/BIOS update failure. Using system programs System programs are the basic layer of software built into your computer. Systemprograms include the POST, the BIOS code, and the Se...

Note: If you want to change the machine type/model, press Y when prompted.Type in the machine type/model and then press Enter. 6. Follow the instructions on the screen to complete the update. Updating (flashing) BIOS from your operating system Note: Because Lenovo makes constant improvements to the ...

Chapter 6. Troubleshooting and diagnostics This chapter describes some basic troubleshooting and diagnostic programs. If yourcomputer problem is not described here, see Chapter 7, “Getting information, help,and service,” on page 63 for additional troubleshooting resources. Basic troubleshooting The ...

Diagnostic programs Diagnostic programs are used to test hardware components of your computer andreport operating-system-controlled settings that can cause hardware failures. Thereare two programs preinstalled on your computer to help you diagnose computerproblems: v Lenovo ThinkVantage Toolbox or L...

PC-Doctor for Rescue and Recovery The PC-Doctor for Rescue and Recovery diagnostic program is part of the Rescueand Recovery workspace on each Lenovo computer. Use the PC-Doctor for Rescueand Recovery if you are unable to start the Windows operating system. To run the PC-Doctor for Rescue and Recove...

Chapter 7. Getting information, help, and service This chapter contains information about help, service, and technical assistance forproducts manufactured by Lenovo. Information resources You can use the information in this section to access useful resources relating toyour computing needs. Online B...

Lenovo Web site (http://www.lenovo.com) The Lenovo Web site provides up-to-date information and services to help youbuy, upgrade, and maintain your computer. You can also do the following: v Shop for desktop and notebook computers, monitors, projectors, upgrades andaccessories for your computer, and...

These items are not covered by the warranty: v Replacement or use of parts not manufactured for or by Lenovo ornon-warranted Lenovo parts v Identification of software problem sources v Configuration of BIOS as part of an installation or upgrade v Changes, modifications, or upgrades to device drivers...

Purchasing additional services During and after the warranty period, you can purchase additional services, suchas support for hardware, operating systems, and application programs; networksetup and configuration; upgraded or extended hardware repair services; andcustom installations. Service availab...

Index A Access Help 64Administrator, password 50antivirus software 6audio line-in connector 9audio line-out connector 9audio subsystem 2 B backup and recovery operations 42basic troubleshooting 57battery, replacing 28bay 2, installing 22BIOS, updating (flashing) 53, 54boot-block recovery 54 C cable ...