Lenovo 2572MB6 - Manual

Safety and Maintenance Guidelines Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. WARNING : Always connect your monitor, the computer, and other equipment to a grounded (e...

Chapter 1. Getting started Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: ● ● ● Flat Panel Monitor ● Power Cord ● Analog Interface Cable- Attached to monitor Note: To ...

Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Swivel With the built-in pedestal, you can tilt and swivel the mo...

Monitor Pivot - Adjust height to the top position before rotation the monitor. - Rotate clockwise until the monitor stops at 90°. User controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monito...

Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor lock to attach it. Setting up your monitor This section provides information to help you set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information locate...

5 . Rotate the head of the monitor into portrait view. 1-6 L T 225 2 p Wide Flat Panel Monitor User’s Guide Plug the monitor power cord and the computer cord into grounded electrical outlets. Note : A certified power supply cord has to be used with this equipment. The relevant national installation ...

To optimize your monitor image, if using the analog cable, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required if you are using the D P&DVI cable. Note : If automatic image setup does not establish the im...

Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use...

● Use adequate lighting for the type of work you are performing. ● Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. ● Keep your monitor screen clean so you can focus on the screen’s contents. Any c...

Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Note: The direct access controls are coloured . Table 2-1. Direc...

Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image ...

Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor dr i ver, troubleshooting information, and service information. Monitor specifications Dimensions Height Depth Wi d th Tilt range Range: 0°/+30° Swivel Range: -45°, +45° Lift R...

Table 3-1. Monitor specifications for type-model (continued) Humidity Operating Storage Shipping 10% to 80% 5%° to 95% 5% to 95% Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested act...

Table3-2.Troubleshooting(continued) Problem Possible cause Suggested action Reference Screen is blank and power indicator is steady amber or flashing green The monitor is in Standby/Suspend mode ● Press any key on the keyboard or move the mouse to restore operation. ● Check the Power Options setting...

● Clock (pixel frequency) adjusts the number of pixels scanned by one Horizontal sweep. If the frequency is not correct, the screen shows vertical Stripes and the picture does not have the correct width. ● Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the picture ...

Chapter 3. Reference information 3-5 Installing the monitor driver in Windows Vista To install the device driver in Microsoft® Windows Vista, do the following: Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista. The system will automatically se...

Installing the monitor driver in Windows XP To use the Plug and Play feature in Windows XP, fi les should be loaded from the Note: This section must be completed before continuing with the Windows XP automatic image setup. Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve di...

Service parts The following parts are for use by Lenovo service, or Lenovo authorized dealers, To support the customer warranty. Parts are for service use only. The table below shows information for model 2 57 2- MB 6. Table 3-3. List of service parts FRU (Field Replaceable Unit) Part number Descrip...

Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo ThinkCentre ThinkPad Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies. Other company, product, or service names may be trademarks or ser...

B-4 L T 225 2 p Wide Flat Panel Monitor User’s Guide Turkish statement of compliance The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE). Türkiye EEE Yönetmeliğine Uyg...