Lennox LPVK-110 - Manual

Lennox LPVK-110

Lennox LPVK-110 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

ELDV PowEr VEnt

ADAPtEr kit

inStALLAtion inStrUCtionS For thE ELDV-PVAk (h7407)

P/n 506019-26

rEV. n/C 10/2008

HEARTH PRODUCTS

KITS AND ACCESSORIES

kit ContEntS

Log Support Bracket - 1 each, Restrictor 5/8” - 1 each, Restrictor

1” - 1 each

tooLS nEEDED

-

5/16” Nut Driver

GEnErAL inForMAtion

This kit provides components that are designed to adapt any size

ELDV fireplace to be used with the Lennox LPVK-110 Power Vent Kit.

ALL wArninGS AnD PrECAUtionS in thE inStALLAtion AnD

oPErAtion MAnUAL ProViDED with thE APPLiAnCE APPLY to

thESE inStrUCtionS.

inStALLAtion inStrUCtionS

Step 1.

Remove the glass door per instructions in the ELDV Care

and Operation Instructions Manual.

Step 2.

Using a 5/16” nut driver,

remove and discard the rear log sup-

port bracket

per instructions in Figure 1 and using the same screws,

install the rear log support bracket provided with this kit. Orient as

shown in Figure 1.

Step 3.

Refer to Figure 2 and remove two screws securing the down-

draft baffle. Remove and retain the down-draft baffle.

Step 4.

Remove two screws securing the restrictor base plate and

remove the restrictor assembly from the fireplace vent outlet.

Step 5.

Remove two screws securing the restrictor body to the base

plate.

Discard the restrictor body

.

Figure 1 - Log Support Bracket

rear Log Support

remove the 2 screws

indicated by arrows

FirEPLACE ADAPtEr kitS (For LPVk-110)

Fireplace

Model

kit Catalog

number

kit Contents

ELDV

h7407

(ELDV-PVAk)

Table 1

5/8” Restrictor

1” Restrictor

Rear Log Bracket

VEnt rUn PArAMEtErS

Any Vent run with A Vertical height

Greater than 30 Feet

Use 5/8” restrictor

Provided with this kit

Any Vent run with A Vertical height

Less than 30 Feet

Use 1” restrictor

Provided with this kit

Note: See Power Vent Kit manual for maximum and minimum

vent run parameters.
Table 2

Figure 2 - Removing Baffle And Base Plate

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.

restrictor Base Plate

restrictor Body

Down Draft Baffle

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Lennox Models

All Lennox Other