Lennox CI1000HT - Manual
Lennox CI1000HT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
HEARTH PRODUCTS
KITS AND ACCESSORIES
775,092M
REV. B 09/2007
Spectra™ Wood Stoves Window Trim Kits
INSTALLATION INSTRUCTIONS FOR WINDOW TRIM KITS FOR USE
WITH SPECTRA MODELS CI1000HT AND CI2000HT WOODSTOVES
DR
AF
T
09
-12
-20
07
KIT CONTENTS
1 ea. Window Trim Kit
1 ea. Instruction Sheet
6mm Braided Rope Gasket
TOOLS REQUIRED
Scissors
Glass Cleaner and Soft Cloth
WARNING
INSTALL ONLY WHEN APPLIANCE IS COLD!
Figure 1
WINDOW TRIM KITS
Cat. No.
Model
Description
Where Used
41M2401
WTK-CI10
Charcoal Trim
CI1000HT
41M2001
WTK-CI20
Charcoal Trim
CI2000HT
Table 1
INSTALLATION INSTRUCTIONS
Step 1. Cut Top Rope Gasket - Turn the door trim casting face down so
that the attachment clamps are fully visible. Measure the braided
rope gasket so that it is roughly the same length as the arched top
surface of the casting, and cut with scissors (see
Figure 1).
Step 2. Cut Bottom Rope Gasket - Measure the rope gasket against the
bottom edge of the casting and cut (see
Figure 2).
Step 3. Peel Off Tape - Peel the paper backing off of the gasket adhesive
(see
Figure 3).
Step 4. Install Lower Rope Gasket - Place the lower rope gasket along the
bottom edge of the casting and press down firmly (see
Figure 4).
1
Figure 2
Figure 3
Figure 4
Cut Bottom
Rope Gasket
Cut Top
Rope Gasket
Peel Off Tape
Install Lower
Rope Gasket
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
