Page 2 - IMPORTANT SAFETY INFORMATION; • DO NOT USE WITH COMMERCIAL EQUIPMENT.
IMPORTANT SAFETY INFORMATION WARNING: • DO NOT USE WITH COMMERCIAL EQUIPMENT. • Always turn off power at the main power source by unscrewing fuse or switching circuit breaker to the off position before installing, removing, or cleaning this thermostat. • Read all of the information in this manual be...
Page 3 - TABLE OF CONTENTS
TABLE OF CONTENTS How do I change the time of day and day of the week? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4How do I turn on the heating or cooling cycles? . . . . . . . . . . . . . . . . . ...
Page 4 - How do I change the time of day and day of the week?; From the main screen press MENU.; MENU; BACK; DAY
4 How do I change the time of day and day of the week? From the main screen press MENU. Use the UP or DOWN arrows to highlight DAY/TIME. Press SELECT. Use the UP or DOWN arrow to highlight DAY, HOURor MINUTES. Press SET. Use the UP or DOWN arrow to scroll throughthe days of the week, hours or minute...
Page 5 - How do I turn on the heating or cooling cycles?; MORE; HEAT
How do I turn on the heating or cooling cycles? From the main screen press MENU. Use the UP or DOWN arrows to highlight HEAT/COOL.Press SELECT. Use the UP or DOWN arrows to highlight HEAT, COOLor AUTO CHANGEOVER. Press SELECT. The SELECTbutton will turn on or off the desired cycle. You do nothave to...
Page 6 - ON
How do I cycle the fan? From the main screen press MENU. Use the UP or DOWN buttons until FAN is highlighted. Press SELECT. Use the UP or DOWN buttons to highlight FAN settings.Press SELECT. How does INTERMITTENT FAN work? INTERMITTENT will turn the fan on for a set period of time for agiven interva...
Page 7 - How do I temporarily change the temperature?; NOTE: Temporary temperature changes override; SET TEMPERATURE AT
How do I temporarily change the temperature? From the main screen, press the UP or DOWN button. The screen will change to the following. Use the UP or DOWN button to adjust to the desiredtemperature. This is a temporary 3-hour hold or untilthe next programmed event, whichever is shorter.For a longer...
Page 8 - Can I set a temporary adjustment for longer than 3 hours?; Press the DOWN button to highlight TEMPORARY HOLD. Press SELECT.
8 Can I set a temporary adjustment for longer than 3 hours? Yes you can! Press the HOLD TEMP button. The following screen appears. Press the DOWN button to highlight TEMPORARY HOLD. Press SELECT. The temperature should be highlighted. Press the UP or DOWN button to adjust the temperature. Press SET ...
Page 10 - How do I set the Vacation Mode?
How do I set the Vacation Mode? Take a trip and don’t worry about the temperature! From the main screen press the HOLD TEMPbutton. The following screen appears. Use the UP or DOWN arrow to highlight the VACATION HOLD feature. Press SELECT. The temperature should be highlighted. Use the UP orDOWN arr...
Page 11 - How do I program my thermostat?
How do I program my thermostat? From the main screen press the MENU button. Use the UP or DOWN button to highlight PROGRAM. Press SELECT. You can select a variety of programming. Make your selection and press SELECT. MON-SUN allows every day to be set the same. MON-FRI allows for weekday programming...
Page 13 - How do I copy one day’s program to another day?; COPY; FRIDAY
How do I copy one day’s program to another day? In the program screen, press the DOWN button until COPY is highlighted. Use the UP or DOWN button to highlight theday to copy to. Press YES / NO. A YES willappear next to the day. Do this for each day towhich that program is to be copied. Press FINISHE...
Page 14 - This thermostat can be set for 2 or 4 events.; How do I know what program is right for me?; The thermostat is factory set with the US EPA E; can change these to suit your lifestyle.
14 What is an event? An event is a programming period. This could be the period in the morning when you are preparing for work or school. It could be theperiod when no one is at home. It could be the period when the household is asleep at night. The time for an event is selected based on when you wa...
Page 15 - HUMIDIFY
How do I set the Humidify Levels? Humidification can occur only when the thermo-stat is in the HEAT mode. The humidify level isadjustable from 15% to 45% RH. From the MainScreen press MENU.Use the UP or DOWN arrow to highlight HUMIDIFY. Use the UP or DOWN arrow to again highlight HUMIDIFY.Use the UP...
Page 16 - DEW POINT ADJ
What happens if the mode is set to OFF? The humidification and dehumidification are turned off. The thermostat will simply control to thetemperature setpoint. What is the difference between Basic and Basic/DP(same as Precision and Precision/DP)? The DP stands for Dew Point. If the remote outdoor sen...
Page 17 - What are the USER settings?
What are the USER settings? The USER SETTINGS can change the way information is displayed on the thermostat and helpto optimize comfort. It’s one way to truly personalize your new thermostat. To get to the USER SETTINGS, press the MENU button from the main screen. USER SETTINGS are below the FAN set...
Page 19 - More Detailed Information on the USER SETTINGS; stage differential plus the 2; stage differential, the second stage of heating (or
More Detailed Information on the USER SETTINGS DIFFERENTIAL SETTINGSThe temperature differential is your comfort level. The differential is the difference from setpointbefore your heating or cooling system will turn on. The 81M27 and 81M28 models also have 2 nd stage differential. In the Heat mode, ...
Page 21 - What are the INSTALLER settings?
What are the INSTALLER settings? The INSTALLER SETTINGS are setup during the initial installation. They tell the thermostat how to function with your heating or cooling equipment. The following is a brief overview and discussion of these settings. SYSTEM SETUPChoose the system component that the the...
Page 23 - to turn on to reach the desired temperature.
INSTALLER settings (continued) ENERGY EFFICIENT RECOVERYWhen turned on, the thermostat will look up to two hours before the next event and anticipate when to turn on to reach the desired temperature. NOTE: This will not allow the second stage to turn on until 20 minutes before the event. DEADBAND SE...
Page 24 - When would I need to change the INSTALLER settings?; AIR EXPERTS
INSTALLER settings (continued) CONTACT INFORMATIONThis allows the servicing HVAC contractor to put their name and phone number into the thermostat to remindyou when service may be required. SERVICE MONITOR MENUDifferent service monitors are provided, depending on which model you have. The filter mon...
Page 25 - The lights indicate different operations of the HVAC equipment.
How does Energy Efficient Recovery™ (EER™) work? Energy Efficient Recovery™ is an energy saving feature. During a set back period (or set up in cooling), it allows the thermostat tolook up to two hours ahead to determine when to turn on the heating (cooling) system. During this time period, the seco...
Page 27 - My energy bills are too high. Is there anything I can do?
27 My energy bills are too high. Is there anything I can do? While we can’t do anything about the high cost of energy, we can try to use less energy and thereby lower our heating and cooling costs. Generally, the best way to do this is to use the EPA E NERGY S TAR® recommended setpoints for heating ...