Lennox 775258M - Manual

Lennox 775258M – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Expanded view of the Upper; Figure 2; TURn OFF ThE FIREPLACE AnD ALLOw IT TO COMPLETELY COOL; Note: Skip the steps that do not specify your model appliance.; InSTALLATIOn InSTRUCTIOnS; Step 1. DesignerTM and RevennaTM inserts - Install the; Cast Surround Kit; Step 2. RavelleTM 30 fireplace - Pillar Face Assembly Instructions:; Figure 3
Page 3 – Figure 4; Step 4. DesignerTM and RavennaTM gas Inserts - Pillar Face Assembly; Figure 6; Packaged with the stove is an air deflector (see F in; Figure 5
Page 4 – Step 8. All Models - Door Installation Instructions; Cast Bottom; Figure 7; Figure 1B; Figure 9; Bottom of grill
Page 5 – To obtain access to the gas appliance controls, pull the lower; CAUTIOn: The pillar face is hot while the appliance is; Assembled Pillar Face; Step 13. All Models - Extended Knob Installation Instructions:; Figure; P = Protrusions on Pillars
Page 6 – REFEREnCE InFORMATIOn; DesignerTM and RavennaTM Fireplace Inserts -; Figure 16 - Cast Surround Dimensions

Loading the manual

PILLAR FACE KITS

MODELS RAvEnnA™, DESIgnER™ AnD RAvELLE™ 30

InSTALLATIOn InSTRUCTIOnS FOR InSTALLIng PILLAR

FACE KITS FOR USE wITh MODELS RAvEnnA™,

DESIgnER™ AnD RAvELLE™ 30 gAS APPLIAnCES

P/n 775258M

Rev. A, 10/2010

HEARTH PRODUCTS

KITS AND ACCESSORIES

KIT COnTEnTS

Please ensure that all these parts are in one of the three boxes. The pillar

face comes packaged in three separate boxes. The following items are

included in each box:

Box 1 - Part # 75093

Cast door with glass installed

Box 2 - Part # 75092

4 ea. Ravelle 30 Mounting Brackets

2 ea. Designer and Ravenna Mounting Brackets

1 ea. Backing Plate With Cast Bottom Attached

8 ea. 5/32” Allen Head Screws

3 ea. Control Knob Extensions

1 ea. Cast Top

1 ea. Left Pillar

1 ea. Right Pillar

Box 3 - Ornate grills (upper and lower grills) - Part # 75091

Traditional grills (upper and lower grills) - Part # 75094

Note: The brackets to attach the pillar face assembly to the appliance are

included in the second box. Discard the unused brackets upon completion

of the pillar face assembly.

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.

Revenna and Designer Cast Surround Kits

(ref. form # 775,292M)

Cat. no.

Model

Description

75156

RDv-DBv-PCFP3044-TOP,

30 x 44 Top (Box 1 of 2)

75157

RDv-DBv-PCFP3044-SIDES 30 x 44 Sides (Box 2 of 2)

* Revenna and Designer ONLY - The pillar cast face kits also requires the

use of the surround kits listed below (sold separately - See reference

information on Page 6). The surround kit must be installed prior to

the installation of the pillar cast face kit.

Figure 1A

Cast Surround *

Pillared Face

*The cast surround kits are not for use with the Ravelle 30 fireplace.

Figure 1B

Ornate Filigree grill (75091)

Traditional Bar grill (75094)

TOOLS nEEDED

Phillips Screwdriver

5/32” Allen Wrench or T-Handle Wrench

gEnERAL InFORMATIOn

If you encounter any problems, need clarification of these instructions

or are not qualified to properly install this kit, contact you local distribu-

tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL wARnIngS AnD PRECAUTIOnS In ThE InSTALLATIOn AnD

OPERATIOn MAnUAL PROvIDED wITh ThE APPLIAnCE APPLY TO

ThESE InSTRUCTIOnS.

Pillar Cast Face Kits*

37-5/8" w x 23-3/4" h

Cat. no.

Model

Description

75093

PILCST-gLASS

glass Door (Box 1 of 3)

75092

PILCST-PILRS2

Back, Pillars, Top (Box 2 of 3)

75094

PILCST-gRL-TRD3 Traditional Bar grills (Box 3 of 3)

75091

PILCST-gRL-FIL3

Ornate Filigree grills (Box 3 of 3)

Shown with Traditional Bar Grills

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Expanded view of the Upper; Figure 2; TURn OFF ThE FIREPLACE AnD ALLOw IT TO COMPLETELY COOL; Note: Skip the steps that do not specify your model appliance.; InSTALLATIOn InSTRUCTIOnS; Step 1. DesignerTM and RevennaTM inserts - Install the; Cast Surround Kit; Step 2. RavelleTM 30 fireplace - Pillar Face Assembly Instructions:; Figure 3

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE. R30 Expanded view of the Upper Ravelle 30 Mounting Bracket Rear view of Backing Plate A Figure 2 TURn OFF ThE FIREPLACE AnD ALLOw IT TO COMPLETELY COOL BEFORE PROCEEDIng. Note: Skip the steps that do not specify your model appliance. InSTALLATIOn In...

Page 3 - Figure 4; Step 4. DesignerTM and RavennaTM gas Inserts - Pillar Face Assembly; Figure 6; Packaged with the stove is an air deflector (see F in; Figure 5

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE. Figure 4 C D E Step 4. Designer™ and Ravenna™ gas Inserts - Pillar Face Assembly Instructions: a) Remove the backing plate and the two mounting brackets from the box. b) The brackets should be positioned with the hooks pointing down and the holes lo...

Page 4 - Step 8. All Models - Door Installation Instructions; Cast Bottom; Figure 7; Figure 1B; Figure 9; Bottom of grill

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE. Step 8. All Models - Door Installation Instructions Rotate the door so the hooks on the two mounting brackets attached to the back of the door are pointing down. Each pillar has two slots (see L in Figure 8) . Slide the hooks on the door brackets in...