Page 2 - WARNING; Lathem Time Corporation; INTRODUCTION; About Your Atomic Clock
WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipmen...
Page 4 - READ THIS FIRST; CAUTION; ACCESSORIES
1 ENGLISH 4 2 READ THIS FIRST 2 CAUTION Avoid placing the unit in environments that are: • humid or dusty. • exposed to direct sunshine. • subject to frequent or continuous vibrations. • outside the temperature range between -5˚C and 45˚C (+23˚F and 113˚F). • affected by chemicals or ozone.Place the...
Page 5 - PACKAGE CONTENTS; CONTENTS
5 PACKAGE CONTENTS Wall-mount holes (Upper side) Wall-mount fittings Screws (2 pcs.) Ribbon cassette (installed at the factory) Sample pack of Weekly TruAlign Time Cards Key User's manual Cover Display Push bar Key hole AC adapter Display Program modes Ribbon cassette Print head Control buttons 3 CO...
Page 6 - QUICK EASY SETUP; tep
AC outlet AC adapter QUICK EASY SETUP NOTICE: Remove the PROTECTION PAD before you plug the AC adapter into the AC outlet. To setup your time clock, follow next steps: S tep 1 Unlock the key and remove the cover. Remove the PROTECTION PAD , and plug the AC adapter into the time clock. Plug the AC ad...
Page 7 - WALL MOUNTING; WALL
Install the supplied wall-mount screws into a wall by using the template located on the inside back cover. Be sure to keep about 6 mm of the screw head away from the wall. S tep 1 Unlock the key and remove the cover. And then hang it on the wall. S tep 2 Replace the cover and lock. S tep 3 WALL MOUN...
Page 8 - Function of 3 control buttons; HOW TO PROGRAM THE CLOCK
To enter the program setting mode, you should plug the AC adapter into the AC outlet and remove the cover. Thereafter press the SELECT button once. Then the clock goes into the program mode showing the " " on the display positioned at the "TIME". Function of 3 control buttons SELECT ...
Page 9 - FACTORY SETTINGS; IMPORTANT
7 FACTORY SETTINGS 9 ItemTimeDateDisplay Hours FormatPrint Order Print Year DigitsPrint HoursPrint MinutesPrint Leading ZeroPrint CommentPrint LanguagePrint DirectionPrint Activation *Daylight Saving Time * Start *Daylight Saving Time * End *Time Zone for Atomic * Clock Password Default SettingsCurr...
Page 10 - SET PRINT POSITION ON TIME CARD; ADJUST PRINT POSITION; Print position adjuster
SET PRINT POSITION ON TIME CARD The print position from the card edge is adjustable by pressing and sliding the print position button located on the right outside bottom of the recorder. Maximum distance from edge of form to print is approximately 1 3/16"(30mm) necessary for Tru-Align time cards...
Page 12 - SETTING THE DISPLAY FORMAT; SETTING THE TIME; SETTING THE DATE
SETTING THE DISPLAY FORMAT SETTING THE TIME It is recommended that during initial installation you manually set the time, date, and time zone. (See "SETTING THE TIME ZONE" section.) The 1600E will automatically correct itself when it receives a radio signal from the atomic clock.Example: Cha...
Page 14 - SETTING THE PRINT ORDER
SETTING THE 12/24 HOUR Example: Change the hour format to 24 hour. Press the SELECT button and position the " " mark at the "HOUR". At that moment, the flashing digit indicates "Order Options" of the hour format. (The flashing means it can be changed.) S tep 1 HOUR SELECT CHA...
Page 16 - SETTING THE PRINT STYLE; SETTING THE YEAR DIGIT
SETTING THE PRINT STYLE SETTING THE YEAR DIGIT Example: Change the year imprint to 4 digits. Press the SELECT button and position the " "mark at the "YEAR DIGIT". At that moment, the flashing digit indicates "Order Options" of the year imprint. (The flashing means it can be c...
Page 18 - SETTING THE LEADING ZERO; SETTING THE COMMENT
SETTING THE LEADING ZERO Example: Change the leading zero to "ZERO: Disabled". Press the SELECT button and position the " "mark at the "LEADING ZERO". At that moment, the flashing digit indicates "Order Options" of the leading zero. (The flashing means it can be chang...
Page 20 - SETTING THE LANGUAGE; SETTING THE PRINT METHOD
SETTING THE LANGUAGE This setting is available if you select "Month," "Day of the week" or "Comment" in previous "PRINT ORDER". Example: Change the print language into French. Press the SELECT button and position the " " mark at the "LANGUAGE". At that...
Page 22 - SETTING THE STARTING DATE OF DAYLIGHT SAVING TIME; SETTING THE DAYLIGHT SAVING TIME
In case of the example, press the CHANGE button to set at "3". And then press the SET button. S tep 2 TU WE TH FR SA SU MO After you finish setting the print method, press the SET button once again. Now the print method setting has been completed. Replace the cover and lock. IMPORTANT: If yo...
Page 24 - SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME
24 22 Change the "Date". Press the CHANGE button to set at "08". And then press the SET button. S tep 3 After you finish setting the starting date of D.S.T., press the SET button once again. Now the starting date of D.S.T. setting has been completed. Go on to the "SETTING THE END...
Page 26 - DELETING THE DAYLIGHT SAVING TIME SETTING; SETTING THE TIME ZONE
DELETING THE DAYLIGHT SAVING TIME SETTING Press the SELECT button and position the " " mark at the "D.S.T. START". At that moment, the "Year" flashes. (The flashing means it can be changed.) Next, press the SET button. At that moment, the flashing changes from "Year" ...
Page 29 - SETTING THE PASSWORD; REGISTERING THE PASSWORD
SETTING THE PASSWORD REGISTERING THE PASSWORD Example: Set the password "1234". Press the SELECT button and position the " " mark at the "PASSWORD". At that moment, first two digits flash. (The flashing means it can be changed.) In case of the example, press the CHANGE button...
Page 30 - HOW TO CHANGE SETTING WHEN THE PASSWORD IS SET
HOW TO CHANGE SETTING WHEN THE PASSWORD IS SET Once the password is set, you have to enter the password for changing any setting. "99 99" will be displayed when you press the SELECT button before entering. Example: Password "1234". Press the SELECT button, at that moment "99 99&#...
Page 31 - SETTING THE DISPLAY FORMAT; CANCELING THE PASSWORD
31 3. SETTING THE DISPLAY FORMAT CANCELING THE PASSWORD The code "00 00" must be entered to cancel the password. Example: Cancel the password "1234". Press the SELECT button, at that moment "99 99" is displayed and first two digits flashes. (The flashing means it can be chang...
Page 33 - ADVANCED FUNCTIONS; RESETTING THE CLOCK
33 To return all setting to the factory defaults, push the reset switch with a pointed implement. NOTICE: All your custom settings will be deleted and will revert to the factory defaults when the reset switch is pushed. To make new settings, please refer to "SETTING". ADVANCED FUNCTIONS Rese...
Page 34 - REPLACING THE RIBBON CASSETTE
34 Unlock the key and remove the cover. S tep 1 Pick up the cassette and remove it. S tep 2 Turn the knob of the new cassette in the direction of the arrow to tighten the ribbon. S tep 3 REPLACING THE RIBBON CASSETTE Place the cassette inside the time clock as shown in the figure. Keep on pushing in...
Page 36 - RADIO SIGNAL RECEPTION; About Radio Signal Reception; Signal Reception Indicator
RADIO SIGNAL RECEPTION About Radio Signal Reception The Model 1600E is programmed to see the WWVB radio signal everyday. Initially the time recorder will search for a signal immediately after you set the time zone. Once the clock has initially set, it will search for the signal 12 times per day to m...
Page 37 - TROUBLESHOOTING; OTHER FAILURES
ERROR No. APPEARS Refer to the following list for proper operation. TROUBLESHOOTING Contact the store from whom you bought the Time Clock, call Lathem Time directly at (800) 241-4990. Correctly insert the card.Make sure that the ribbon cassette is correctly inserted in place. Press the push bar. Ent...
Page 38 - SPECIFICATIONS
38 Clock accuracyCalendar Printing systemPower failure compensation Operating environment: DimensionWeightPower consumptionRating of AC adapter Monthly accuracy ± 15sec. (at ordinary temperatures) Year up to 2099. Automatically adjusted to leap years, 31-day months and months with thirty or fewer da...
Page 39 - Limited One-Year Warranty; Wall Mount Template
6 ENGLISH Lathem warrants the hardware products described in this guide against defects in material and workmanship for a period of one year from date of original purchase from Lathem or from an authorized Lathem reseller. The conditions of this warranty and the extent of the responsibility of Lathe...
