Kwikset 954OBNZW50015SM - User Manual
Kwikset 954OBNZW50015SM Electronic Deadbolt – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – or; door handing process,; Install the interior assembly
- Page 3 – window; Important Information about the interior cover; Install the interior cover; Confirm that the code(s) added in previous step can unlock the door.; Checkmark symbol with one beep; Press lock symbol once.; Mastercode; Add the lock to your smart home system; button “A”; Please allow time for the controller to add the lock.
- Page 4 – Prevent unauthorized entry. Since anyone with access; Reference Guide
Required tools
Ruler
Hammer
Wood block
Phillips head screwdriver
Additional Tools (depending on application)
A
K or L
(2x)
K
L
N
M
A
A
B
B
B
A
B
If drilling a new door, use the supplied template and the complete
door drilling instructions available at www.kwikset.com/doorprep.
Note: Additional door preparation may be
required for doors with 1-1/2" (38 mm) holes.
Consult the deadbolt drilling instructions at
www.kwikset.com/doorprep.
or
bac
kse
t
Measure to confirm that the hole in
the door is either 2-1/8" (54 mm) or
1-1/2" (38 mm).
Measure to confirm that the backset is
either 2-3/8" or 2-3/4" (60 or 70 mm).
2-3/8" or 2-3/4"
60 or 70 mm
1-3/8" –2"
35 – 51 mm
Measure to confirm that the hole in
the door edge is 1" (25 mm).
Measure to confirm that the door is
between 1-3/8" and 2" (35 mm and
51 mm) thick.
A
A
B
C
D
B
C
D
Is the door edge chiseled?
Is the D-shaped hole centered in the door hole?
Which latch are you installing?
Hold the latch in front of the door hole, with the latch
face flush against the door edge.
2-1/8"
54 mm
1-1/2"
38 mm
1"
25 mm
YES
YES
NO
NO
Use latch “A”. If the
latch bolt is not already
extended, extend the
latch bolt as shown.
No adjustment is required.
Proceed to next step.
D-shaped hole
D-shaped hole
Rotate latch face as
shown to extend latch.
wood
block
actual
size
Use latch “B” (not
included). If the latch
bolt is not already
extended, extend the
latch bolt as shown.
Latch “A”
Latch “B”
N
(2x)
C
M
(2x)
Longer screws
install closest to
the door jamb.
door frame
E
Install strike on the door frame.
Make sure the hole in the door frame is drilled a
minimum of 1" (25 mm) deep.
or
chiseled
not
chiseled
or
1
Prepare the door and check dimensions
2
Install the latch and strike
or
Latch
“B” is not included. If needed,
please contact Kwikset to order
a drive-in latch for your lock.
Strike
Batteries
C
A
B
Exterior Touchscreen
Adapter
Ring
D
Mounting
Plate
Parts in the box
Fasteners
03809
46780
K
M
N
L
64109
U
49191
T
Interior Assembly
G
F
H
J
E
64843
64845
Q
V
S
64844
R
(1-3/8" • 35 mm)
(1-3/4" • 44 mm)
(2" • 51 mm)
1 / 4
E
N
G
LI
SH
66462-002
Rev 03
954
Z-Wave® Plus
Installation and User Guide
Kwikset
Technical Support
1-866-863-6584
www.kwikset.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2-1/8" 54 mm 1-1/2" 38 mm What is the thickness of your door? Use the shorter gold screws. Use the medium silver screws. 1-3/8" (35 mm) 1-3/4" (44 mm) 2" (51 mm) Use the longer black screws. or or 1-3/8" 35 mm 1-3/4" 44 mm 2" 51 mm Q R S Cable goes underneath latch. S...
U (3x) G U window If you wish to unlock the window, you can slide it up for more convenient access to the programming buttons while the cover is installed. To unlock the window, remove the security screw. The window on the interior cover is locked by default to prevent someone from tampering with yo...
Display Alert Reason Solution “X” pattern flashes one time with one beep*. One incorrect code entered. Re-enter code. “X” pattern flashes three times with three beeps*. No user code programmed. Program at least one user code. Programming timeout after 20 seconds. Attempt programming procedure again....
